Liczymy pasujące modele…
I could not find long enough support for my bed, so I designed one. It has holes for 4mm screws. It was designed to be about 200mm but it can be adjusted from ~155mm up to ~230mm (not much thread left there so be careful). I originally…
The adapter is made for a 2,5T jack, but they are not standard, unfortunately. Mine has an inner screw of radius 25mm, an inner radius is 49mm, and about 11m of depth. The jack stand pad has dimensions in the picture, the curve is 43mm…
I changed the thread to M6 so You can use PC4-M6 instead of PC4-01.
This is a goodman handle designed for the XTAR D26 diving flashlight - it may also fit other models. You will need an M6x20-22 stainless steel bolt and a spring washer. You will also need some 4mm bungee cord. I prefer to print it with ~5…
Cable diameter is about 10mm.
I printed it with 3 walls with 15% infill. You need 4x 10mm M3 bolts for receptacles, 2x 30mm M3 bolts for cover, and 6x M3 nylock nuts. My relay module has, a USB-B connector and it is labeled as HW-348. I made some tolerance for the PCB…
The hinge is held together by some M3 bolt at least 22mm long. You need a Pi camera ribbon cable of about 500mm. Remixed from: https://www.thingiverse.com/thing:5019537 https://www.thingiverse.com/thing:5259776
This bracket allows to mount the Pioneer GM-D1004 amp in place of the factory amp in the trunk. I used PETG and it works fine. Put some automotive Tesa tape on the metal ears before sliding the bracket to dampen vibrations. If You are…
For this mod, You will need a USB back panel cable. I cut the Dupont connector and soldered the USB-A plug. I am using an enc28j60 module with an ethernet socket that is sticking over PCB by 2mm. You will also need to print 4 spacers…
To wszystkie aktualnie dostępne wyniki.
