Liczymy pasujące modele…
I enjoy printing chip clips and I'm always on the lookout for good ones. This one is very fun and relies on compliant mechanisms to work. I noticed that the original ABS version wasn't quite strong enough for thicker items to clamp on…
I designed this close to 3" ground screw anchor to hold in place a tent that i have setup to provide shade for my chickens. It can get quite windy and the 9" aluminum tent stakes were coming out easily. I haven't load tested these to say…
Saw these cup-holders / drip catchers on amazon. Figured id model one up. One improvement I wanted to make which I think is absolutely necessary is to have the top part be TPU to allow for a snug fit on the detergent and to allow for some…
I lost my bamboo back scratcher. Had some time so I figured this would be fun to make and print. First few iterations had claws too sharp, would literally tear skin.. This one is just right! Prints pretty fast. All you need is a 1/2"…
Designed a dock for my pebble 2. Room for the heart rate monitor was important. It fits my Pebble Time Steel, Pebble Time Round and Pebble 2 without issues. Was designed with PETG in mind, ABS might have a tighter fit for the charging…
This is an elevated base for the Aarke Carbonator 3 so that you can put a hose through the bottom and attach it to an external large c02 tank without having to drill a hole in a counter or the aarke it self. This is made in two pieces and…
This is a mount I modeled for the Viofo A119 V3. Fits very well and is easy to print in multiple orientations. Print Settings Printer: Artillery 3d Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Filament: ANY PETG Notes: PETG…
I decided to get some backyard chickens. I saw they sold chicken swings for 20-30 dollars. I figured id have fun and make my own. This is a pretty easy print and its very sturdy. You'll need a 1/2" wooden dowel, key rings and some rope or…
My PowerBlock weight insert “Selector Pin” broke. The part looked pretty basic so i decided to model it and print it. I re-used all of the old hardware from the broken insert. It came with some magnets and some torx bolts and nuts. Works…
Just picked up this EGO trimmer. Needed a place to put it since its so long.. Designed this mount and it seems to work well! EDIT* I also included a mount made from a 3d scan that literally fits like a glove. Enjoy. Print in PETG, 3…
I printed the Wall j1772 Holster by Falcon64 but I found out that the latch on my Morec EVSE didnt quite lock on his, it needed to be wiggled to catch and wasn't reliable for this EVSE. The Morec 32 amp evse I bought came with a wall…
This was designed to fit the tesla mobile connector gen 2 precisely from a 3d scan. The holes are 4mm and have a 8mm recess. If using outdoors, id recommend PETG unless its for sure kept in the shade.
Modeled after the uniform version of the logo. Enjoy. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Notes: I used the prusa color changer tool to stop at 4.3mm and change to a…
If you have a threaded cannula, this model will allow you to press fit into it and then secure it from having it be pulled out. Print with PETG or PLA 30% infill. 0.2mm layer height.
I picked up an Aya neo as I was impatient with the steam deck delay. The Aya Neo is awesome! I have large hands so I was interested in using some grips. There were options for the neo but they didn't feel comfortable for me. I have a 3d…
I picked up one of the BURST sonic toothbrushes as a low cost sonicare alternative. I am happy with it so far. I noticed that the replacement heads didn't come with a cover like the sonicare ones do. So instead of buying sonicare heads…
Ecovacs only has one air freshener available for purchase. Cucumber & Oak. I decided to model up this container to allow me to add some cotton and a few drops of any essential oil i wanted. Now the house smells like mint when it vacuums.…
I purchased a Marcy Foldable Upright Exercise Bike Model NS-652. Its great, but I wanted a place to put my phone. So I designed this and printed it out. It works great. For reference, my phone's dimensions are 156.9 x 78.9 x 7.9 mm and it…
I quickly whipped up this base for a soda stream fizzi model. The goal was to have an extension on the bottom that allowed a C02 hose to connect to a larger tank. I could have just left the back off or drilled a hole in it, but what is…
I lost the seat adjustment for one of my Marcy NS-652 folding bikes. I could have maybe called them up to have them ship me one but I though it might be easy to 3d print with the help of a m6x60 bolt from the hardware store. Its held up…
Given pebbles unfortunate circumstances, i figure a few of you pebblers will maybe try out vector watch. Here is a charging dock for the vector watch luna. Print on the side for minimal supports. Print Settings Printer: i3 mk2 Rafts:…
Picked up a mobius maxi for fun, wanted to make a good mount for my 2014 Mazda 3. This design is detachable and uses 6x3mm magnets to secure the mounts together. You can find the magnets here: https://www.amazon.com/gp/product/B077K364Z7…
This is a CPL filter mount for the blueskysea B1W dashcam. This mount press fits into the lens housing of the b1w with just your hands, the cpl filter also press fits inside. No glue, no mess. You will need the CPL filter for the A119…
To wszystkie aktualnie dostępne wyniki.
