Liczymy pasujące modele…
Puzzle box I made from a Fusion 360 tutorial. See picture for solution. Check out Product Design Online. Very nice Fusion 360 tutorials. Print Settings Rafts: No Supports: No Resolution: .2 Infill: 15%
Remix of a baby Groot pencil holder from https://www.thingiverse.com/thing:2143549 added a few stumps.
Battery holder for Ridgid cordless drill batteries. Fits the 18v, possibly others. May fit other battery brands as well. See included profile.
Made the top, corners and bottom separate pieces. The corners are a snug fit as I designed them to be glue free but not loose enough to come apart unintentionally. This gives you the option to swap out photos. You can also make them…
5 wallplates to choose from . Single switch, dual switch, tri switch, and AC wallplates. Message if you need a different style.
Print the Letter A, base, and roll tide separate for best results. No support required. Base includes points for letter placement. Small bar between the “T” and the “I” should be removed after placement and glue is dry. I added to keep…
replica of the Skadis hook from Ikea. Recommend resin print for dimensional accuracy.
A few pipe connectors I made for a PVC stand for a bird cage. Scale them to fit for your particular application. Models are 27.25mm ID, 33mm OD Print Settings Printer: Creality CR-6 SE Rafts: No Supports: Yes Resolution: .2 Infill: 15…
Cleveland logo with city silhouette. Made with Inkscape and Fusion 360. Minimal support needed if printing one piece. I have provided the separate pieces if you want to print without support. Also give the option to make the pieces in…
Lid for the HALOT One Pro resin vat. Cover your resin when not in use, keep the dust out!
Quick solution for your raspberry pi Octoprint or Klipper solution for the Ender 3 / Ender 3 Pro. Supports a relay switch and step down converter to power the Pi off your printer PSU. I printed with Overture black PETG. .20 layer / 100mms…
Case for your iPhone 14 Pro with Jack Skellington. Print in TPU. Two models included, one with custom supports built in, and one without.
Topper for your generic turntable intended for 3D scanning. This is a replica of the one available from 3D maker pro.
Simple wall mount for your cordless drill / impact tool. No support needed. Scale to fit your required size.
A simple dyson attachment holder. One piece, print unsupported. Verified to work with V8 and V10 models. Maybe others. Print Settings Printer: Creality CR-6 SE Rafts: No Supports: No Resolution: .20 Infill: 15% Filament: GST3D PLA Brown…
Model of the Nord N300 cell phone. Useful for building your own case if you own the real thing.
A multi part desk ornament for the Dallas Cowboys fan. (I am not one of them lol) Made this for a friend. Multi part so you can do the star and letters in any color you wish. Print support free.
A bag holder designed for a standard roll of doggy doo bags. This was modeled for a resin print, but should print well enough on your FDM if you adjust for thread tolerances.
Remix change the dimensions of the sensor pocket to accommodate the BL Touch "Smart" V3.1. Allows for clearance of the wire connector on the sensor. Print Settings Printer: Anet A8 Rafts: No Supports: Yes Resolution: Standard Infill: 15%…
Hanger for the Ryobo 40v powerhead. Hang your trimmer on the wall. Accommodates a 25mm to 26mm shaft. Hang without the battery attached. Print with PETG or ABS if your garage or storage area gets hot. reccomend minimum 30% infill, 4…
Print the rod sections upright and super glue together. Use one rod if you want a shorter length.
Clip on dual attachment holder for Dyson. Standard size for most V models. Print Settings Printer: Creality CR-6 SE Rafts: No Supports: No Resolution: .20 Infill: 15% Filament: Generic PLA Any Notes: Place, slice and print. Category:…
For resin printing, I printed upright with .05 layer height. This allowed for minimal support. Updated model: repaired thin wall and a few holes. Made the glasses holder a bit wider.
Simple 2mm template for Halot One Pro FEP.
Replica of the Andersen window latch. Replaces model 39958 and other similar. Suggest to print with PETG, PETG-CF, or ABS/ASA
Print the letters, silhouette, dome and base separate for best results. No support required. Base includes points for letter placement. I made the dome separate so it can be printed a different color, which should be copper!
Tension release arm for the SeeMeCNC EZRStruder. Made this model because my stepper overheated and warped the original. Must be made from ABS or other higher temp material. Original part is injection molded ABS. Print Settings Printer:…
A work in progress BC adapter. No support needed. Print out of PETG or nylon composite. 0.12 layer height. Threads are a very small feature and results on your printer may vary. I have added tolerances to the threads for perfect fit on my…
To wszystkie aktualnie dostępne wyniki.
