Liczymy pasujące modele…
Modeled this for someone who lost their remote backer. It's 98% as close as the stock one. Its difficult to print the small tabs closest to the middle of the remote, so better results might be achieved through a smaller nozzle or a resin…
I saw in the comments that the box was not sitting flat on the bed surface and the OP never got around to fixing it. Here you go, both pieces are now sitting flat on the bed. ALSO: I have added separate files for the lid and box. The box…
Dual USB Port Panel for Hondas I modified this switch plate so that you can have 2 USB's looking factory fresh in your 20 year old Honda. I wrapped the USB plugs in electrical tape to hold it into place, which also helps give extra…
I created this adaptor for my makita sander to fit onto my miele vacuum. I left the walls thin so infill doesnt matter, and it has a little bit of flexibility. worked perfectly for me. Probably would be best if printed in vase mode. I…
My Miele vacuum is over 20 years old and still works great. The plastic parts on it have long since been broken, but now that I have a 3d printer I found some time to fix it up. This is an adapter that I am gluing to the side of the…
I crashed 2 revo nozzles into my Voron bed ;( I drew this jig up in Fusion and all you have to do is put your nozzle in it, and rotate the nozzle in the jig. Keep firm pressure on the biggest section of it and look at it from the end. You…
I mounted my MMU on top of an enclosure, which means more filament is retracted than before. This has caused filament to come out the openings and get tangled with eachother, causing errors. I designed these sides to just clip in and help…
I remixed this design so that it can be screwed to a wall. I also added a second variation that includes a cutout for a charging cable. Have not tried it yet. Will post an update when I do.
I modified the original stl so that you can now just slip a zip tie through it. I found it easiest to tighten the zip tie BEFORE sliding it onto the brake. Its easier to tighten it to fit that way. Also I hit it with a dab of hot glue…
All I did was add a countersunk hole so that it can be mounted to a wall. Since the back is slightly recessed if you tighten the screw too much it will pinch the remote and make it hard to slide in and out, so back the screw out just a…
The lever on this saw stand had taken a beating and no longer worked. So I drew up a new one. Fits onto model DWX723.
UPDATE 7/15/20 I stepped away for a bit but finally printed and assembled the latest updated versions. The holes all line up nicely, and the new buck converter mounts are much easier and out of the way while assembling. I extended the bed…
I had some sideclicks sitting around that were meant for Firesticks, but have since moved on to Google Chromecasts. I know they sell new ones that are white and fit perfectly for 28$, but I already had one sitting in the drawer just…
I bought the Makita 199232-5 Guide Rail Adapter and a Powertec guide rails. When I put it on my XSH04 Circ Saw, I had to give it a little gap to not cut away too much of the rubber. I designed this little spacer to slip on so that its the…
I have 3D printed drawers and an upgraded BLV kit for my ender 3 pro. The stock mount wouldnt work with the drawers in the way so heres my remix.
I'm waiting on my kit to show up tomorrow, but I printed this one and it was hitting the electronics on the top of my extruder so i modified it. If thats stupid on my part please let me know Bill. You can see in the photo that I had to…
UPDATE 7/23/2020 I've revisited this design and made it so that it can now be printed in pieces. This has MANY benefits. It prints in less than half the time, it no longer needs supports, and I believe that the pieces are all stronger…
A 1x2x 1/2 gridfinity cube for holding a mini camera and 3 batteries
Adapter that allows the Sideclick remote control to attach to the newer triangular shaped Nvidia shield remote control.
Other people have designed different versions but I wanted to make my own and also give it a nicer handle to pull it out easily when needed. I also made a version that just sits flat on the frame. it is not intended to be taken out…
I have two samsung curved monitors, you'd think they'd have the same VESA mounting patterns, but nah. One had a 75mm pattern, one had a 100mm, neither were matching heights from top or bottom of screen. This adapter uses 4 extra M4 nuts…
This holds the remote control for my air conditioner. There's a countersunk hole to screw it or you can double stick tape it. Category: Tool Holders & Boxes
I printed this in Prusament PETG with a layer height of .05. No supports required.
Bought a used car that was missing 2 of the 3 child seat anchor covers. Since I had the one to model it off of, I was able to print it. Unfortunately its a different shape/contour for the middle anchor cover so I was not able to do that…
UPDATE 6/1/2021 I added a vertical version with a slot for charging. I preferred the placement just under my stereo so I ended up using VHB tape to attach the CD mount to the bottom section. Now I can still access the volume dial easily.…
I made an awful lot of changes to the OP's stl. There were a lot of holes and it was very fragile. I have modified this to fit the battery for Mate X ebikes now and it is rock solid. I printed it with 80% infill. It feels more flexible…
Update- 10-10-20 I have the screen myself now and use the SD card slot sometimes. Today the card fell inside the case -_- bummer. I added a little bit more of a slot for the sd card so it hopefully wont fall right into the case again.…
I have a 20 year old vacuum and it just wont die. The plastic bits on it may get destroyed over time, but the actual vacuum is a beast. The lid that hides the accessories got damaged, so I spent a little bit of time in tinkercad and…
Make sure to use a test piece to double check staple placement and depth.
To wszystkie aktualnie dostępne wyniki.
