Liczymy pasujące modele…
A string of six Nerf X-shot crusher shell casings for nerf dart ammo belt. Fully integrated with original nerf belt. All six darts can be printed in place, just sacrificing a little cross sectional area that is more for aesthetics than it…
Just needed something a little shorter than the original model offered.
Just a more filament friendly remix of the JDO Solutions 6-dart quick reload. I intend to use nine of these in combination with my quick load ammo box that can be found in my nerf collection here:…
This is a Modified N-1 Starfighter for the X-wing miniatures game at 1:270 scale. I used 0.07mm layer resolution and 100% fill. I used supports in selected areas beneath the nacelles of the craft. This was just for fun since this hasn't…
This is an ammo box that can hold nine 6 dart quick load clips, 56 darts in total. Should work with either 6-dard quick load clip. See https://www.printables.com/model/238552-nerf-6-dart-quickload-remix
Print resolution at 0.10. Print with PLA. gray for the first 0.7 mm, gary for the next 0.7mm, white, and red for the final 0.7mm. I used Sunlu PLA. These templates are the same dimensions as the official ones. Please check out my other…
Simple remix of the folding razor blade cutter except there are some notches in place for 45 or 68 deg. cutting of filament. This supports both 1.75mm and 2.85mm filament in 45 degrees. There is only a 1.75mm hole for the 68 degree angle…
Print resolution at 0.10. Print with PLA. gray for the first 0.7mm, black for the next 0.7mm, and white for the final 0.7mm. I used Sunlu PLA. These tokens are the same dimensions as the official carboard tokens. Please check out my other…
Use these generic ship tiles with interchangeable initiatives in lieu of the carboard. I designed this after discovering that the newer products from AMG have differing factions on each side of the ship tiles. This gave me a huge sorting…
This is a huge ship token that you can use to paste the print outs from Infinite arenas and your custom ships. I want to plug a few good resources since I have your attention. As I said there is a new Homebrew module which makes print…
This is a tournament tray that is designed to fit the HDX / Hypertough storage you can find at Walmart. This can hold many tokens and is compatible with the HDX / Hypertough storage system.…
The Bird Scare seemed like a fun project. However I hit a wall with the type of materials I was using (PTEG) and the configurations I was using to actually print a viable prop assembly. I modified the prop assembly so that the slots are…
Print resolution at 0.10. Print with PLA. Green for the first 0.7mm, black for the next 0.7mm, and green for the final 0.7mm. I used Sunlu PLA. These tokens are the same dimensions as the official carboard tokens. Please check out my…
Print resolution at 0.10. Print with PLA. Red for the first 0.7mm, black for the next 0.7mm, and yellow for the final 0.7mm. I used Sunlu PLA. These tokens are the same dimensions as the official carboard tokens. Please check out my other…
Theses base tokens were designed to hold the printable ship tiles you create on your own or with the assistance of Infinite Arenas Homebrew tools ( https://infinitearenas.com/homebrew.php ). Simply print out the tile on paper of card…
This is a multitool for your keychain, inspired by the Gerber Shard ( https://www.gerbergear.com/en-us/shop/multi-tools/all-multi-tools/shard-22-01769 ). Be the first to open a beer for your friend. It has multiple functions: pry bar,…
Print resolution at 0.10. Print with PLA. Red for the first 0.7mm, black for the next 0.7mm, and Red for the final 0.7mm. I used Sunlu PLA. These tokens are the same dimensions as the official carboard tokens. Please check out my other…
Theses base tokens were designed to hold the printable ship tiles you create on your own or with the assistance of Infinite Arenas Homebrew tools ( https://infinitearenas.com/homebrew.php ). Simply print out the tile on paper of card…
Print resolution at 0.10. Print with PLA. Orange for the first 0.7mm, black for the next 0.7mm, and orange for the final 0.7mm. I used Sunlu PLA. These tokens are the same dimensions as the official carboard tokens. Please check out my…
Theses base tokens were designed to hold the printable ship tiles you create on your own or with the assistance of Infinite Arenas Homebrew tools ( https://infinitearenas.com/homebrew.php ). Simply print out the tile on paper of card…
This is a lower profile that does not allow a light to go through the bottom. Instead there is a separate piece for the back, where a customized message can be created. Use the color change option to change the color of the background.
A generic ship dial you can use in conjunction with the Infinite Arenas homebrew tools. Just simply paste the print out of the dial onto this template, and it will give you the feel of the official game pieces. I want to plug a few good…
Print resolution at 0.10. Print with PLA. Red for the first 0.7mm, black for the next 0.7mm, and blue for the final 0.7mm. I used Sunlu PLA. These tokens are the same dimensions as the official carboard tokens. Please check out my other…
Print resolution at 0.10. Print with PLA. Red for the first 0.7mm, black for the next 0.7mm, and purple for the final 0.7mm. I used Sunlu PLA. These tokens are the same dimensions as the official carboard tokens. Please check out my other…
Print resolution at 0.10. Print with PLA. Blue for the first 0.7mm, black for the next 0.7mm, and blue for the final 0.7mm. I used Sunlu PLA. These tokens are the same dimensions as the official carboard tokens. Please check out my other…
The original HDX (or Hypertough) Inserts by BrandonGene are great, but I made these alternate inserts to tidy things up. I may try to update the target lock trays in the future because I there are a tight fit at the moment. However, I…
This is a remix of the Caliper Radius Gauge by DrAl. I liked DrAl remix, however my caliper blade did not quite fit. I specifically had an issue with the cavity that is supposed to support the very end of the blade was not large enough…
This is an insert to hold the base game and expansion to Redneck Life. If you are all interested in the game, you can find it here. http://www.gutbustingames.com/store/p1/redneck-life.html. There is nothing fancy about this model. It is…
I have a 1.0 and 2.0 friendly storage solution for tie fighters for the table top miniatures game, x-wing. I used the model provided by paralepsis and widened it slightly so it could accommodate the 1.0 version, but also the 2.0 version…
I took a combination of ideas, and added a few of my own to come up with this tournament tray. Enjoy. The maneuver template and range template trays from TheDustyCelt are perfect. No need to change those and they are strictly loaded here…
***WARNING*** I recently discovered that some of the turn and bank templates do not match the official AMG of FFG standard template. Also to note that you should not use these templates for official organized play. I will endeavor to…
I made a slight adjustment to the dial. I made the front wall just slightly thicker, and a hole for the ship ID number. The picture you see was made in draft mode, 0.25 resolution with PLA. Please check out my other designs for the X-Wing…
Sometimes you accidently buy paintsticks without the carboard shell in bulk. At some point you have to use them up. Edit 1/27/2023: I was still not happy with the thumb button slide. So I updated that so hopefully the thumb pressure is…
Print resolution at 0.10. Print with PLA. Red for the first 0.7mm, black for the next 0.7mm, and blue for the final 0.7mm. I used Sunlu PLA. These tokens are the same dimensions as the official carboard tokens. Please check out my other…
This is a base for bird scatter on 18 mm diameter pole. Use the extended version, or try and put the pivot point at the center of gravity, if you can find it. I used several parts form…
This is a ship dial for a custom ship that in this case happens to be the hammer head corvette. I want to plug a few good resources since I have your attention. There is a new Homebrew module which makes print outs that you can paste to…
Two coasters for you, inspired by the Lebowski Bar napkin in Reykjavik, Iceland, (https://lebowskibar.is/en/), which by the way is an excellent restaurant. the food and the cocktails are top notch.
Fun x-wing dial covers for you to enjoy.
Here are some low profile maneuver dial covers for X-Wing TMG. This can be very useful when you are limited on storage. This will allow you to do away with the extra carboard and buttons so that you only need to carry the dial cover and…
Convert your flashlight into a lantern with this simple diffuser screen. Print the screen in transparent PLA if you have it. Print the cone in anything. Glue foil to it, shinny side out as a reflector. Then glue the cone inside the…
A container to hold the additional tokens from the Catan Seafarers expansion. Very similar to the source number holder, it just has a cut out to show that these tokens are for the seafarers expansion.
You can use this card to quickly check the capacity of your tie down or D-ring anchors. Applied to 60 ksi steel only. Use the "Fit Red to determine a minimum capacity of 10 kips. (Math, 60 ksi steel, diameter is 0.461 inches, area of…
To wszystkie aktualnie dostępne wyniki.
