Liczymy pasujące modele…
These are the files needed to mount the 3DChameleon onto the Creality K1 and K1 Max printers. Also included is the profile for the K1 (K1 Max just needs the distances and build plate size adjusted.) To install: Remove the front left screw…
This is a set of Mk4 upgrade parts for the 3DChameleon Mk2/Mk3 that allow the PTFE tubes to be gripped and held in place without the need for using the brass compression fittings. There are 5 models in this, the A+, B+ and C+ parts (which…
This is the full set of printed parts and PrusaSlicer profile to mount the 3DChameleon Mk3 onto the Sovol SV-06 printer and the SV-06 Plus. This set includes the 3DClippy filament cutter used to cut off the tip of the filament so it can…
This Printable includes the main mount and switch mount to mount the 3DChameleon Mk3 onto the BambuLabs series of printers. The large Base Mount holds both the 3DChameleon and the Electronics Enclosure on the back of the printer. There…
This is an adapter to allow the Creality Sprite extruder to utilize a PC4-M10 PTFE coupler. It requires the addition of one M3-8mm screw to hold it in place. This file was created in Tinkercad and the file is public... you can modify it…
This is a generic 3DClippy that can be adapted to any i3 style printer. It utilizes a mechanical arm to move a 9mm x 18mm utility knife blade to cut filament off. The arm is activated by a simple motion to either side of the gantry… one…
This is the coupler from the video where I walk you through the PC4-M10 PTFE Coupler to allow the 1.8mm ID PTFE tube to be used to constrict the melted filament as it is retracted out of the hot end to a diameter that will fit within the…
Just a spacer for a NEMA 17 motor. Category: 3D Printer Parts
This is a generic mount for the limit (trigger) switch on the 3D Chameleon Mk3. It's designed to mount to any aluminum extrusion. One M4 x 8 and one M4 T-Nut are used to secure it to the aluminum extrusion. Two M2 x 4 screws are used to…
If you're encountering an issue where the #1 or #2 extruder are having too low of a pressure despite the adjustment of tension sliders is maxed out, try these A+ models to slightly lengthen the distance of between the motors… this will…
This is a simple 4 Color printed spool holder for the 3DChameleon. Print two of these and connect them with 3 8mm Steel Rods 300mm long.
Here are the 3DChameleon mounts for the Qidi X Max 3 printer. Also included is a “beta” of the PrusaSlicer profile. It might need some minor tweaks… and if you find anything it needs, please let me know. There are 3 STLs you need to…
Great little test of your 3DChameleon... a keychain! Use it to calibrate and test your 3DChameleon on your printer! Works great as a keychain as well!!!
This is an adapter to allow a PTFE Tube to connect to the Ender 3 / CR-10 style extruder using a PC4-M10 connector. This allows the 3D Chameleon to automatically load and unload the filament. (Note, it adds about 2mm of height to the…
Please note: For the current Mk3 installation, do not follow this guide… use our Basic Installation Instructions instead that uses the 3DChameleon to feed the stock extruder as it is. These are mounts for the new 3D Chameleon Mk2 to…
This is a replacement lever tension arm for the Titan extruder clone to allow a PC4-M10 PTFE connector to be attached to allow the 3D Chameleon to feed the extruder. Category: 3D Printer Accessories
This is an antique pedal car headlight for a friend of mine who couldn't find the original parts. He had only one good one, so I simply duplicated it. (Updated 8/12/17 - Cleaned up model a bit and added SKP source file.) Print…
This is a first attempt at a vacuum form mold set for the Sinclair ZX80 computer. The ZX80's case was originally vacuum formed from polystyrene sheets, only later becoming injection molded. This is an attempt to produce simple molds that…
This is a replacement mount for the stock extruder to allow a PTFE tube to be fed into the extruder. Replace your stock metal bracket with this and add a PC4 M10 PTFE connector. Category: 3D Printer Accessories
These mounts are needed in addition to all the parts already included in the 3DChameleon to mount the switch to the underside of the build plate's Y axis. The angle mount for the 3DChameleon itself should be used in it's stock…
3D Chameleon Mk3 snap on switch cover... just to make it look nicer. Category: 3D Printer Accessories
These are the mounts for the 3DChameleon to attach it to the Peopoly Magneto X. The main 3DChameleon mount uses two M3x10 screws to affix it to the left side of the MagnetoX's top rail. The 3DChameleon will fit inside the holder and can…
This is the 3D Chameleon flexible logo designed for Quad Color printing. Also included is a Simplify3D Factory file to print it on a Four Color Ender 3. Print instructions Category: 3D Printing Summary This is the 3D Chameleon flexible…
Just an edit of Neptune 796's Artillery Sidewinder Palette adapter to allow a PC4-M10 PTFE adapter to be used instead for the 3D Chameleon and the Prusa style MMU. It is recommended to print it with 100% infill. Category: 3D Printer…
This is a PTFE PC4-M10 Adapter for the SeeMeCNC EZR Struder to allow a bowden coupler to attach to the in feed of the EZR. This allows the 3D Chameleon to load and unload the filament automatically. Category: 3D Printer Accessories
This is a switch mount for the Monoprice Mini Delta to mount a two color 3D Chameleon color changer. You can see a video of it here: https://youtu.be/4d2wiS0X-pg Print instructions Category: 3D Printer Accessories Summary This is a switch…
This is a first pass at a "GCode Shifter" which allows a part to be printed on a tilted bed conveyor style printer. I designed it for my "Flash FDM" printer shown at Rapid 2016 and MRRF 2017. The part should be rotated to an arbitrary…
This was an original idea I had for adding multiple colors to the Flashforge Finder. It uses friction pads on the ends of the arms attached to the extruder's Y adapter. This allowed it to grab the filament and push or pull it into or from…
I modified InfinityPlusPlus' MK8 drive to use a simple to acquire "Delta Faucet" spring and optimized the placement of the vias to allow the extruder to drive either 3mm or 1.75mm filament. It also includes recessed heads for the 3mm…
I needed a new tray for my CTC Riverside SLA printer (basically a Form1 Clone.) The price was a bit steep for a bit of acrylic and a piece of tape, so I built one. I've attached several different formats, I designed it in Sketchup, but…
This is a Bowden replacement connector for the Monoprice MK3 Printer and it's various clones. This adapter allows the switch to be mounted in place of the stock extruder motor, with the new motors mounted to the top left/right of the…
A simple two part mount for attaching the 3D Chameleon Mk2 to the existing extruder location on the Prusa Mini. It is mounted at the same 45 degree angle as the stock extruder. See here https://www.thingiverse.com/thing:4740953 for a…
To wszystkie aktualnie dostępne wyniki.
