Liczymy pasujące modele…
Lid for 0.5L and 0.33L beverage cans to prevent insects from entering the can. Material consumption is just 10,5 grams (3,5 meters) of filament. On most cans, the lid snaps shut and doesn’t open on its own—this feature has proven useful…
Seat Belt Buckle Dacia Duster, Volkswagen Touran, Citroen C4 Picasso (II. Gen) and others Note: Not intended for use while driving with a passenger. -If you decide to use this adapter for tying small animals, it should be more suitable…
Seat Belt Buckle Dacia Sandero Nyní dostupný jako příslušenství k tomuto modelu https://www.printables.com/model/1855441-key-ring-for-belt-silencer-or-shopping-cart-coin – klíčenka. Užitečné, pokud přecházíte mezi několika auty a…
a fun game for small and big people Category: Games
I made a slight change to the dimensions of the model so that it fits better into the original filter holder in the whirlpool bath. It is now firmly secured in the holder. It is no longer necessary to use silicone to secure the adapter to…
New version of the universal seat belt silencer compatible with: Citroen C4 Grand Picasso (II gen) Volkswagen Golf (2005) Volkswagen Touran - if you find compatibility with another type of car - please leave a note in the comments - so I…
This is a figure based on Dummy 13. With the original model, I encountered issues printing the feet of the lower legs (I failed even after multiple attempts), and one part was missing from the frame I added supports for the problematic…
A lid for 0.5-liter and 0.33-liter beverage cans that prevents insects from getting into the can. On most cans, the lid snaps into place and won’t open on its own—this feature has proven useful in my car because it prevents spills.…
Box with lid 10,5 cm x 7cm x 5cm For the hinge axis use a piece of fibre
A lid for 0.25-liter beverage cans that prevents insects from getting into the can. Material consumption is just 9.2 grams (3.0 meters) of filament. The lid fits securely on most cans and does not open on its own—this feature has proven…
small filament clip - fast printing and low material consumption. Ideal for vacuum bags - does not damage vacuum bags consumes very little filament - less than 1gram. That's approximately 25 cm (9 inches). It is ideal for the last meter…
28 mm clamp – suitable for use as a sturdy tablecloth clamp Clamp width 40 mm. I use it as a tablecloth holder in rooms intended for celebrations (it has to be really sturdy). The geometry of the original model has been modified so that…
For teaching fractions a small remix of the original discs. Completely redesigned box. Now the box has a thread and handling holes for easier removal of discs from the box box without handling hole can be found here:…
To make printing in vase mode possible, I modified the back of the original model considerably A vase-shaped print. I use this as a test print. After printing, it can be used as a toy. The model is designed for printing in vase mode. This…
Box with lid 12,5 cm x 6cm x 5cm For the hinge axis use a piece of fibre Box suitable for: https://www.printables.com/model/555766-balance-game-tetris https://makerworld.com/en/models/83962#profileId-89753
a simple screw-in container. Suitable for travelling generated box Internal dimensions: width - 85 mm height - 32 mm The lid can be screwed on easily - It can be printed even one percent smaller You can print with both PLA and PETG.…
I recommend printing PETG with full perimeters I recommend printing with supports
Holder for Xiaomi Mi Box S 2 Quick and easy mounting of the Xiaomi Mi Box S 2 to the back of a TV, on a wall, or similar. The holder can be attached using M4 screws or zip ties. Zip ties can be used for mounting, for example, to the TV's…
snail, slug trap - fast print (vase mode) You need a glass or PET bottle to add to the printed parts Both the jar and the PET bottle should be smaller in diameter than the width of the rib The bottom part of the ribs is used for…
Press into the grooves in the roller blind tube during installation
A vase-shaped print. I use this as a test print. After printing, it can be used as a toy. The model is designed for printing in vase mode. This type of printing does not use infill or supports. The model consists of only one wall—if…
Replacement towing bracket Category: Toys & Games
Once the Cart Coin is unlocked, you can remove it from the shopping cart; this means you don’t have to keep it attached to the cart while shopping. It’s therefore ideal for permanent attachment, for example, to a keychain—I keep mine on…
The handle differs slightly from the original part (the strap is not as wide) Press the ventilation grille handle into place where the original part was. It will lock into the ventilation grille on its own, just like the original part. -…
A simple connector for 2.5 mm diameter stakes (common in the Czech Republic) I use it to extend stakes when pre-growing climbing plants If you have trouble sliding it onto the skewer (due to the skewer not being the correct size), use a…
Czech emblem optimized for 0,4 or 0,2 nozzle You can find the instructions and the base of the lid here:
Image Terezka optimized for 0,4 nozzle You can find the instructions and the base of the lid here:
Image Anetka optimized for 0,4 nozzle You can find the instructions and the base of the lid here:
USA emblem optimized for 0,4 nozzle You can find the instructions and the base of the lid here:
Base plates for placing pre-made coasters and painting logos and text for: Lid for metal cans (0,5L & 0,33L) - for your emblem You can find the instructions and the base of the lid here:
Deutschland / Germany emblem optimized for 0,4 nozzle You can find the instructions and the base of the lid here:
Radioactivity emblem optimized for 0,4 nozzle You can find the instructions and the base of the lid here:
Slovakia emblem optimized for 0,4 nozzle You can find the instructions and the base of the lid here:
Canada emblem optimized for 0,4 nozzle You can find the instructions and the base of the lid here:
Image Nejlepší učitelka optimized for 0,4 nozzle You can find the instructions and the base of the lid here:
Image Agátka optimized for 0,4 nozzle You can find the instructions and the base of the lid here:
Universal spacer for large bore coils. Can print both PLA and PETG
To wszystkie aktualnie dostępne wyniki.
