Liczymy pasujące modele…
I recommend using balls with blue dot; they are the hardest. ACCESSORIES Prusa CoreOne/+/Gen2 You will need 4 M3x6MM screws to fix them to the lower frame; this one has 4 threaded holes in each of the 4 corners as standard. Prusa…
Wydruk około 8,13 €–9,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These accessories prevent dust or pieces of filament from getting stuck in the Z axis and under the side covers. The shoulders of the PrusaCoreOne_DP_ZAxe.stl files must be directed downwards; they enter the holes in the platform. Two…
This is a cable protection for X motor on Prusa I3 MK4/MK4S. The electrical wires are kept in good position. Print Settings 1 x PrusaMK4_X_CableProtection : Layer:0.20mm Raft:no Support:no Infill:25% 1 x PrusaMK4_X_CableProtectionCover :…
Stand for the Lego Millennium Falcon (ref. 75257). Glue all parts. RELEASE 09/04/2025 Publishing the files in STEP format for customizing.
A remix of "Fennec Rocket League" by Sedlacek_Jakub. Print Settings Printer Brand: Prusa Printer: i3 MK4 Rafts :No Supports: Yes Resolution :0,10mm Infill: 15% Filament :Giantarm PLA white Category: Vehicles
PRINT SETTINGS Wing & Elevator Filament: PETG Perimeters: 4 Layer thickness: 0.1 mm First layer: 0.1 mm Infill density: 100% Overlap Infill/Perimeters: 30% Fuselage Filament: PETG Perimeters: 4 Layer thickness: 0.1 mm First layer: 0.1 mm…
The originality of this piece is that the heart turns freely in the body of the cat. Print instructions Print Settings 1 x LucycatBody : Layer:0.20mm Raft:no Support:no Infill:15% 1 x LucycatHeart : Layer:0.20mm Raft:no Support:no…
This design replaces the original Prusa Core One Wifi cover. In a single cover it combines the Wifi and the GPIO interface. ACCESSORIES This part is secured with the original M10 SHCS screw The GPIO card is secured with 4 x M3x6mm SHCS…
In early 2025, I replaced my two PRUSA MK4S printers with two PRUSA CORE ONE printers (one assembled and one kit). The second MK4S printer had the MMU extension; I kept this accessory to remount it on the one delivered as a kit. I…
This MMUS Slot Buffer Holder uses this others parts : Numbered Slot Covers by cjbeck : https://www.thingiverse.com/thing:4540766 See the Assembly.pdf file.
Inspired by " Core One modified bowden-bend with wider radius " by @Petehagoras. RELEASE 27/07/2025 New slightly lower version (-1mm).
This is a cable guide for X motor on Prusa I3 MK3S. The electrical wires are kept in good position. Print instructions Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.15mm Infill: 100% Filament: Fiberlogy HDPLA…
Inspired by the BINGOPRINTS model ( https://www.printables.com/fr/model/549354-prusa-mk4-usb-stick-case ), this accessory protects the prominent USB key. It also gives an aesthetic and homogeneous side to the cover of the LCD screen.…
This is a new Engine Holder for the LS3 Chevy Engine ( https://www.thingiverse.com/thing:1911808 ). I modeled a new holder to support the weight of he engine (more than 3Kg with accessories, and there are still many elements to add).…
This is a small bin for trash like purge lines. Insert two M3x4mm screws to the existing threaded holes to align the Trash Bin (see photos). 11/10/2026 New model for Prusa Core One+ Gen2
This is Headers Remix for the LS3 Chevy Engine ( https://www.thingiverse.com/thing:1911808 ). The features are : . Replacing factice screws by holes for real screws . Gaskets . Exhaust collector for driver and passenger sides Print…
Buckle for 40mm width belt. I recommend to print with ABS or PETG. 26/06/2022 : New files for 1 inch (25,4mm) width belt. 30/06/2022 : New files BeltsBucklePart2Half.stl and BeltsBuckle1inchPart2Half.stl. Print two files…
This small bed handle allows you to move the Prusa I3 MK4/MK4S bed without burning yourself. Simply clip it to the left arm of the bed behind the heat sink ; no screws are needed to hold it. It is necessary to apply quite strong pressure…
This is Oil Pan Remix for the LS3 Chevy Engine ( https://www.thingiverse.com/thing:1911808 ). The features are : . Replacing factice screws by holes for real screws . Gaskets . Dry Sump Connector . Plugs . Holes for electric components…
This is a Main Belt Tensioner for the LS3 Chevy Engine ( https://www.thingiverse.com/thing:1911808 ). Not having plans, all these pieces were designed from photos found on the net. Despite the constraints of 3D printing and accessories, I…
This is Ignition Kit extension for the LS3 Chevy Engine ( https://www.thingiverse.com/thing:1911808 ). The Spark Plug is made by Thebush1951 ( https://www.thingiverse.com/thing:3896150 ). Print instructions Printer Brand: Prusa Printer:…
Sometimes the filament gets stuck between the stepper motor and the drive gear of the nextruder. This design closes the gap between the stepper motor and the drive gear, thus limiting this source of problem. On the other hand, when the…
This is Accessories extension for the LS3 Chevy Engine ( https://www.thingiverse.com/thing:1911808 ). Print instructions Printer Brand: Prusa Printer: I3 MK3S Resolution: 0.15mm Filament: Geeetech PLA Silk silver, black, bronze and yellow…
Features : Thread M10x1 Recessed screw
In my 3D setup, the filaments are enclosed in airtight containers placed on a shelf above the printers. In this context, it's necessary for the MMU3 buffer to be connected to these overhead containers; this allows me to use the MMU3 in a…
This is Timing Cover Remix for the LS3 Chevy Engine ( https://www.thingiverse.com/thing:1911808 ). The features are : . Replacing factice screws by holes for real screws . Cam Sensor . Cam Sensor Holder Release 09/12/2019 : New version of…
This is Valley Plate Remix for the LS3 Chevy Engine ( https://www.thingiverse.com/thing:1911808 ). The features are : . Replacing factice screws by holes for real screws . Gasket Print instructions Printer Brand: Prusa Printer: I3 MK3S…
This is a Starter extension for the LS3 Chevy Engine ( https://www.thingiverse.com/thing:1911808 ). The starter Drive Gear is a remix of the original. The electric wires connected to the solenoid are factice. The electric wires connected…
This is Main Pulley extension for the LS3 Chevy Engine ( https://www.thingiverse.com/thing:1911808 ). Print instructions Printer Brand: Prusa Printer: I3 MK3S Resolution: 0.15mm Filament: Geeetech PLA Silk blue and silk silver Print…
This is Turbo Accessories add-ons for the Mazda RX7 Engine ( https://www.thingiverse.com/thing:3006071 ). Printed parts list (15) 1 x TurboAirFilter : Layer:0.15mm Raft:no Support:no Infill:15% 1 x TurboAirFilterBase : Layer:0.15mm…
Phone car holder for PEUGEOT 3008. This accessory fits into the right air inlet. Release : 03/07/2024 PCH_Holder_V2 : new holder with vertical reinforcements Print Settings Printer Brand: Prusa Printer: i3 MK4 Rafts: No Supports: Yes…
I took Bastiif's idea ( https://www.printables.com/fr/model/295403-2kg-spool-adaptor ). This version is easier to print horizontally. I recommend printing it in PETG with a layer of 0.2mm and an infill rate of 50%. Print Settings Printer:…
In my printer setup, filament spools are stored in plastic crates placed on shelves above the printers. This configuration makes it easy to feed filament from the top of my Prusa MK4S printers. The Prusa Core One printer is originally…
It is a Starter Handle replacement for tools with heat engine. Use StarterLock4mm, StarterLock5mm or StarterLock6mm depending on the diameter of the rope. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…
While assembling the Prusa Core One kit, I experienced a malfunction with one of the three Z-axis motors. I immediately thought of the Splitter since it powers all three Z-axis motors. Unfortunately, the Splitter is mounted on two clips,…
Inspired by the Extrutim model: https://www.printables.com/model/473485-cable-insertion-tool-split-wire-loom-tubing I designed it for mounting the Prusa Core One kit. This one is slit on the side to easily insert the electrical wires. On…
Avant toute chose, toutes mes félicitations à Rocco's Stuff pour cette excellente conception et pour le plaisir que procure l'impression et le montage de ce modèle. Comme le précise Rocco's Stuff, ce n'est pas un modèle pour débutant ; sa…
This design has two assembly options : 1) Assembly without electronic 2) Assembly with electronic With this option, the dummy Security Camera has two features : 2a. A red led which flashes at regular frequency 2b. Six white LEDs that…
A Rear Fans Flaps for the Prusa Core One/+/Gen2.
IN PROGRESS : The assembly documentation is currently being prepared. For accessories, look at original assembly file.
This is a Engine holder for the EJ20 Subaru Engine ( http://www.thingiverse.com/thing:2451310 ). Print settings 1 x EngineSupport : Layer:0.15mm Raft:no Support:no Infill:20% Accessories 2 x m4 threaded inserts 2 x m4x10mm SHCS Mounting…
Printed parts list (113) 1 x 1_Stand.stl: Layer:0.15mm Raft:no Support:yes Infill:30% 1 x 1_Stand_Bottom.stl: Layer:0.15mm Raft:no Support:no Infill:30% 1 x 1_Stand_Arm_1.stl: Layer :0.15mm Raft:no Support:no Infill:15% 1 x…
This is a Intake Manifold Spacer remix for the EJ20 Subaru Engine ( http://www.thingiverse.com/thing:2451310 ). There is two Intake manifold spacer on the EJ20 engine ; they are not the same. The second is the mirror of the first. On the…
Original one-piece 170mm side box.
Excellent design semblable à la pièce originale avec de légères modifications.
A stand for the Game Watch "The legend of Zelda" and his box. Print Settings Printer Brand : Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.20mm Infill: 15% Filament: GIANTARM PETG Black
This is an Intake Manifold remix for the Ford FlatHead V8 ( https://www.thingiverse.com/thing:2537602 ). This design is planned to receive a supercharger soon. Release 24/03/2020 : New IntakeManifoldPulleyV2 (it replace…
This spool holder is inspired by the one made by MaikyX . It replaces the original side spool holder of the Prusa Core One. Its advantages: With its screw, it can support filament spools with a width of 130mm, including 2kg spools. It has…
This is an Engine Stand extension for the Ford FlatHead V8 ( https://www.thingiverse.com/thing:2537602 ). The mounting holes are already present on the engine block. Print Settings 1 x EngineStandBackLeft : Layer:0.15mm Raft:no Brim:no…
Greak design but it doesn't produce any sound.
This package contains 4 warnins signs : Alarm Alarm with holes Camera Camera with holes You can print them in three colors : Background white Pause (M600) at 1mm for red Pause (M600) at 2mm for black I recommend printing in PETG for…
This is a new Timing Cover and the Distributor for the Ford FlatHead V8 ( https://www.thingiverse.com/thing:2537602 ). This design is planned to receive a supercharger soon. The assembly of this part is meticulous; the components are…
This is an Oil Pan remix for the Ford FlatHead V8 ( https://www.thingiverse.com/thing:2537602 ). Features : Gaskets Oil Pan remix (for Dispstick) Oil Pan Starter Flange remix (closed) Oil Pan Disptick Starter enclosure Print Settings 1 x…
This is a Cylinder Head Gasket extension for the Ford FlatHead V8 ( https://www.thingiverse.com/thing:2537602 ). The gasket is glued to the cylinder head. More add-ons…
This accessorie allow to slide the top grid with a simple knob on the front side. This mechanism is now compatible with the new "Automatic opening/closing of the ventilation grille" feature included from Firmware 6.4.0. /!\ For proper…
This is an add-on for Exhaust Headers of the Ford FlatHead V8 ( https://www.thingiverse.com/thing:2537602 ). Be careful ; ExhaustHeader1Collector and ExhaustHeader2Collector are not the same. Print Settings 1 x ExhaustHeader1Collector :…
This is the Turbo Oil Drain Flanges for the EJ20 Subaru Engine ( http://www.thingiverse.com/thing:2451310 ); the turbo is available with this original model ; all turbo STL files are in the ZIP file…
This is Gaskets add-ons for the EJ20 Subaru Engine ( http://www.thingiverse.com/thing:2451310 ). The package include : Driver Side Head Gasket Driver Side Valve Cover Gasket Passenger Side Head Gasket Passenger Side Valve Cover Gasket…
This a remix of the original Prusa I3 MK4 LoveBoard Cover ( https://www.printables.com/fr/model/451501-mk4-printable-parts ). I add "PRUSA" and "MK4" text on front side and left side. I have print this part in transparent PETG (totally…
With a cover and more solid. For Peugeot 107. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.20mm Infill: 100% Filament: GIANTARM PETG Black Category: Vehicles
Les côtés (Catapult_Side.stl) sont légèrement modifiés pour avoir un meilleur appuie pour les enfoncer dans Catapult_Base.stl Le support de cible (Catapult_stand.stl) est en une seule pièce plus stable Le bras et le support de bras sont…
This is a Crank Pulley remix for the Ford FlatHead V8 ( https://www.thingiverse.com/thing:2537602 ). This remix only applies to the first version of the motor published by EricThePoolBoy. For the latest version, use the remix (two holes)…
This is Handle replacement for Mosquito Net Door. Print instructions Printer: Geeetech A10 Rafts: No Supports: No Resolution: 0.20mm Infill: 30% Filament: Beeetech PLA White Print Settings 1 x MosquitoNetDoorHandle : Layer:0.20mm Raft:no…
This is an addon of distributor for the 22RE Toyota Engine ( https://www.thingiverse.com/thing:644933 ). This add on is a complement of : https://www.thingiverse.com/thing:2599638 Print instructions Printer: Geeetech A10 Rafts: No…
This is a Oil Dipstick for the EJ20 Subaru Engine ( http://www.thingiverse.com/thing:2451310 ). Print instructions Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.15mm Infill: 100% Filament: Geeetech PLA Black…
This is a Oil Pickup extension for the EJ20 Subaru Engine ( http://www.thingiverse.com/thing:2451310 ). Print Settings 1 x OilPickup : Layer:0.15mm Raft:yes Support:yes Infill:100% 1 x OilPickupCap : Layer:0.15mm Raft:no Support:yes…
A resin drain funnel for the PRUSA SL1S. Excellent design very useful.
This is Waterpumps remix for the Ford FlatHead V8 ( https://www.thingiverse.com/thing:2537602 ). This design is planned to receive a supercharger soon. Release 05/03/2020 : WaterpumpPulley is slightly smaller for then tensioner pulley…
This is a Timing Cover Gasket add-on for the Mazda RX7 Engine ( https://www.thingiverse.com/thing:3006071 ). Printed parts list (1) 1 x TimingCoverGasket : Layer:0.15mm Raft:no Support:no Infill:100% More add-ons…
This is a Oil Pan remix for the MAZDA RX7 engine. Original : https://www.thingiverse.com/thing:3006071 Features . Holes for real screws . Joint with two heights (no washer needed to raise the engine block) . 7mm hole for the electric…
This is 4 Spark Plug add-on for the MAZDA RX7 engine. Original : https://www.thingiverse.com/thing:3006071 Printed parts list (4) 1 x SparkPlugShort : Layer:0.15mm Raft:no Support:yes Infill:100% 3 x SparkPlugLong : Layer:0.15mm Raft:no…
This is a Oil Flanges add-on for the MAZDA RX7 engine. Original : https://www.thingiverse.com/thing:3006071 Printed parts list (6) 1 x TurboOilReturnFlange : Layer:0.15mm Raft:no Support:no Infill:100% 1 x TurboOilReturnFlangeGasket :…
This add-on is a high-quality piece with highly realistic details. Congratulations to the creator of the original piece. Look the Assembly.pdf for details.
This is a Cooling Manifold for the EJ20 Subaru Engine ( http://www.thingiverse.com/thing:2451310 ). Print settings 1 x CoolingManifold : Layer:0.15mm Raft:no Brim:no Support:yes Infill:20% 1 x CoolingManifoldConnector : Layer:0.15mm…
There are 4 Led Indicators : POWER (Main power supply) The main power LED indicates the presence of the voltage necessary for the operation of the LoveBoard, 3.3 V. H-ACT (Heatsink Fan Act) The heatsink fan cools the hotend components,…
This is a Oil Filter add-on for the MAZDA RX7 engine. Original : https://www.thingiverse.com/thing:3006071 Printed parts list (6) 1 x OilFilter : Layer:0.15mm Raft:no Support:no Infill:30% 1 x OilFilterBase1 : Layer:0.15mm Raft:no…
This is a Throttle Body remix for the MAZDA RX7 engine. Original : https://www.thingiverse.com/thing:3006071 Printed parts list (9) 1 x UpperIntakeManifoldExtension: Layer:0.15mm Raft:no Support:no Infill:100% 1 x…
This is a Oil Filler remix and add-on for the MAZDA RX7 engine. Original : https://www.thingiverse.com/thing:3006071 Printed parts list (9) 1 x OilFillerPlug: Layer:0.15mm Raft:no Support:no Infill:100% 1 x OilFillerBottom: Layer:0.15mm…
Ceci est une refonte de l'excellent modèle Wandering hour wall clock conçu par TypicalTinkerer . Pour l'assemblage ouvrir le fichier Assembly.pdf. A toute fin utile sont publiés les fichiers “clock_gear-18T.step” et…
This is a Hall Effect Sensor add-on for the MAZDA RX7 engine. The Front Pulley was remixed to allow mouting the Trigger Wheel. Original : https://www.thingiverse.com/thing:3006071 Printed parts list (6) 1 x HallEffectSensorPlug :…
This is a Cam Gear Face remix for the EJ20 Subaru Engine ( http://www.thingiverse.com/thing:2451310 ). The Cam Gear Face is updated with holes for m2 screws. The screws have a maximum length of 2 mm and are glued. More add-ons…
This is a Rear Plate Cover add-on for the MAZDA RX7 engine. Original : https://www.thingiverse.com/thing:3006071 Printed parts list (1) 1 x RearPlateCover : Layer:0.15mm Raft:no Support:no Infill:100% Accessories (1) 1 x m3x5mm SHCS…
This is a Ignition Coil Pack add-on for the MAZDA RX7 engine. Original : https://www.thingiverse.com/thing:3006071 Printed parts list (18) 2 x IgnitionCoilHolder : Layer:0.15mm Raft:no Support:yes Infill:100% 2 x IgnitionCoilBody :…
This is a Waterpump Tensioner Bracket remix for the EJ20 Subaru Engine ( http://www.thingiverse.com/thing:2451310 ). I made a remix of this part because the original spring stop is too fragile (the second picture). More add-ons…
This is a Knock Sensor add-on for the MAZDA RX7 engine. Original : https://www.thingiverse.com/thing:3006071 Printed parts list (6) 2 x KnockSensorBody : Layer:0.15mm Raft:no Support:no Infill:100% 2 x KnockSensorPlug : Layer:0.15mm…
This is a Oil Metering Pump add-on for the MAZDA RX7 engine. Original : https://www.thingiverse.com/thing:3006071 Printed parts list (13) 1 x OilMeteringPumpBody: Layer:0.15mm Raft:no Support:yes Infill:30% 1 x OilMeteringPumpBodyGasket:…
These are Belts add-on for the MAZDA RX7 engine. Original : https://www.thingiverse.com/thing:3006071 Printer parts list (2) 1 x BeltFront340mm: Layer:0.20mm Raft:no Support:no Infill:100% 1 x BeltRear480mm: Layer:0.20mm Raft:no…
This is a remix of Coiling Backing Plate Cover to allow it to be printed correctly with a 0.4mm nozzle. Original : https://www.thingiverse.com/thing:3006071 Printed part list (2) 1 x CoilingBackingPlateCover : Layer:0.15mm Raft:no…
Two accessories for the Clim T206 Tank : Chain Track Machine Gun (M2 Browning) If necessary, glue the metal rod on the outer edges. Print Settings Printer Brand: Prusa Printer: I3 MK3S Supports: Yes Resolution: 0.15mm Infill: 100%…
This is a Oil Pressure Sender add-on for the MAZDA RX7 engine. Original : https://www.thingiverse.com/thing:3006071 Printed parts list (4) 1 x OilPressureSenderSupport : Layer:0.15mm Raft:no Support:no Infill:100% 1 x OilPressureSenderNut…
This is a Valve Spring Puck remix for the EJ20 Subaru Engine ( http://www.thingiverse.com/thing:2451310 ). This piece is updated to allow its printing with a 0.4mm nozzle. Print instructions Rafts: No Supports: No Resolution: 0.15mm…
This is a Accessories Bracket add-on for the MAZDA RX7 engine. Original : https://www.thingiverse.com/thing:3006071 Printed parts list (2) 1 x AccessoriesBracket: Layer:0.15mm Raft:no Support:yes Infill:30% 1 x IdlerPulley: Layer:0.15mm…
This is a Engine Hook add-on for the MAZDA RX7 engine. Original : https://www.thingiverse.com/thing:3006071 Printed parts list (2) 1 x EngineHookFront: Layer:0.15mm Raft:no Support:yes Infill:30% 1 x EngineHookRear: Layer:0.15mm Raft:no…
This is a Apex Seal Spring add-on for the MAZDA RX7 engine. Original : https://www.thingiverse.com/thing:3006071 Printer parts list (9) 3 x SmartApexSealSpring: Layer:0.15mm Raft:no Support:no Infill:100% 3 x ApexSealSpring: Layer:0.15mm…
The parts of this remix are a little more solid than those of the original model. Print instructions Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.15mm Infill: 100% Filament: Geeetech PLA Black Print Settings…
How to read the time : The current hour points to the current minute. This is a rework of the Improved Wandering Hour Clock by David Kingsman . The original model was made for IKEA BONDIS Clock ; this clock being hard to find, I modified…
This a wheel and support replacement for Samsonite Luggage Print Setting 1 x Body: Layer:0.20mm Raft:no Support:yes Infill:100% 1 x Left: Layer:0.20mm Raft:no Support:no Infill:100% 1 x Right: Layer:0.20mm Raft:no Support:no Infill:100% 1…
Some remixed parts for VW Type 1 Engine - Ignition
The replacement nut for KitchenAid Pasta Press 5KSMPEXTA. Release 04/05/2024 Adding KitchenaidNut.step file. 07/03/2025 Adding KitchenaidTemplateScrew.step and KitchenaidTemplateScrew.stl files. Print Settings Printer Brand: Prusa…
Some accessories to improve the guiding of the electrical wires for the Alfawise U30 printer. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.20mm Infill: 30% Filament: Geeetech PLA Blue
