Liczymy pasujące modele…
Replacement sliders for Beyerdynamic DT 770/880/990 headphones. Yes, you can buy original replacement parts – for an insane price! Also they will break after a short time again because they are just too fragile. This is a remix of…
Mount for cable ties. Glue it onto something an pull the cable ties through it. Category: Parts
This container can hold up to 20 normal sized hex bits. It includes a drawer mechanism for easy and secure carry. See image for print orientation.
A clever designer decided to place the USB port right next to the HDMI port. Often when I try to plug in a USB device, it ends up in the HDMI port. Urgh. This plug covers the HDMI port, protects it from dirt and makes it impossible to…
A simple lamp shade for the BLF/Sofirn LT1 lantern. There are two versions available: v1: My original idea, but my printer struggled with the 60° overhang at 0.2 mm layer height. v2: Slightly different design with a maximum overhang of…
Cover to hide (and protect) the ribbon cable of the Creality Ender 3. Category: Tools
Just another tool to bend the legs of your components (resistors, diodes, …) for 0.1" perfboard. Category: Tools
Transform your Emisar D4v2 flashlight into a fancy lantern! Do you like the BLF LT1 and want something smaller? This might be just right for you! Included in this kit are two parts (consisting of three models to print): The base for a…
A simple pen tray for your favorite pens, with automatic pen centering feature. Category: Containers
The BLF (Sofirn) LT1 is a very nice lantern, but sometimes the glare gets annoying. Wouldn't it be great to block the light in one direction? Now this is possible with this simple design that can be clipped to the LT1. You can use it…
Sometimes, wearing a headlamp on your head can be a challenge, for example during rain or fog or when using a hat. An alternative is to wear the headlamp around your neck. But this can be uncomfortable and wobbly with most original…
Easy to print mount to attach a flashlight to your handlebar. It uses a 8 mm cable tie to attach it to a 22 mm handlebar and a 12 mm velcro strap to attach a flashlight to it (diameter 15 mm and larger). Still a prototype, FreeCAD file…
Clip to attach a right angle headlamp to a headband in a single body. Requires only a (20 mm) textile elastic band. The pocket clip can stay on the light. This is mostly a template for FreeCAD that you can adjust to fit your own…
I really like the Blade-Tech Tek-Mount! But it is not only expensive, it is also larger than often necessary. The Quick Mount Micro follows a similar design, but scaled down and optimized for 3D printing. All you need to do is to print…
The original ZebraLight silicone mount that comes with their headlamps works, but not great. One of its biggest issue: It is hard to attach and remove the flashlight from the mount. It takes time. This is a customized version of my…
This tactical ring makes it possible to hold the Nextorch TA30C Max reliably in more ways. Print in 0.1 mm layer height for better fit. For assembly, slip the adapter ring into the groove of the clip, then slide on the tactical ring from…
Modular (bicycle) mount for older Garmin eTrex GPS receivers (and everything else you want to attach). Basically this is my design idea for a mounting system that I've specialized for my old Garmin eTrex Legend HCx. The goal was a modular…
This is a customized version of my unibody headlamp clip specifically for the ESKTE (Skilhunt) H150 . You can use the official elastic band if you cut off the smaller buckle, sew the end into a loop and use the buckle to connect both…
This is a customized version of my unibody headlamp clip specifically for the Skilhunt H04 RC Mini . You can use the official elastic band if you cut off the smaller buckle, sew the end into a loop and use the buckle to connect both ends.…
Simply attach a headlamp to the strap and quickly remove it. The pocket clip can stay on the light. This is an experimental design and although I had run a FEM on it I'm absolutely no FEM expert. The included design is for a Sofirn SP40…
Towel holder with hidden screws. Screw in the mounting plate and afterwards slide on the holder. Needs a 10 mm diameter pipe. Category: Kitchen & Dining
This is a tactical ring for the Noctigon KR1/KR4 flashlight with 18 6 50 battery tube. 18350 version is available here . It replaces the clip or lanyard ring. Assembly is easy: Screw off the tailcap, remove both o-rings and the original…
A simple base for the Emisar D4S flashlight. Category: Tools
A case for pairs of all sizes of (round) batteries. Dimensions can be configured via a spreadsheet in the FreeCAD file. If you print the outside with fuzzy skin you will get a nice texture. STLs for AA, AAA, 18650 and 18350 are included.…
A headband holder for the Manker E02 II headlamp. Requires a 20 mm rubber webbing strap and a strap of 12 mm double sided velcro. Category: Tools
A tactical ring for the Mateminco FW2 / Astrolux WP4 flashlight/LEP. There are two versions, one for the 18 6 50 and one for the 18 3 50 tube. I have a bad feeling about the size of the gap between battery tube and tailcap because it…
Little tool to unscrew the bezel of the ESKTE (Skilhunt) H150 headlamp
Case for the USBasp. This is for the version with the horizontal 10P connector. With so many versions available you have to check with yours if it will fit. Category: Tools
You want to attach a lanyard to your FW3A? You want some color accents? Then you might want to try this lanyard ring! It replaces the original metal clip or lanyard ring of your flashlight. Remove head and tailcap from the battery tube…
Ersetzt ein defektes Gaskastenschloss von Fendt Wohnwagen.
This is a tactical ring for the Noctigon KR1/KR4 flashlight with 18 3 50 battery tube. 18650 version is available here . It was designed in two parts to minimize supports. The tube can be simply press-fit into the ring. Then slide it from…
A diffuser for the Sofirn C01 flashlight. Print in vase mode. Category: Tools
This is a ring to attach a lanyard to the Noctigon KR1/KR4 with 18 3 50 battery tube. Just screw off the tailcap, slide it over the tube (yeah, now it has three tubes!) and screw the tailcap back on. I designed it so that it can be…
The "heat shield" of the Imalent RS50/MS08 has a major design flaw: The switch is exposed and it is very likely to switch the fans on whenever you don't want to. This cap clips onto the end of the heat shield and protects the switch from…
To wszystkie aktualnie dostępne wyniki.
