Liczymy pasujące modele…
Update 26/03/2025: Added drawer with baseplates (default frame and weighted one) for ^x^x3 version Added drawer with baseplates (default frame and weighted one) for ^x^x6 version Added chest ^x^x3 version with basic top plate Added chest…
Need specific sizes for a puzzle that was 75*50, so i made those 250mm parts from the original ones.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.3x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.72mm and the Actual…
Adapted the box and triangle base to fit 5x3 magnets inside Check out the original design for the rest of the parts.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 116.43x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual…
Inserts for all the boardgame, separated in two (one for the setup of the board, the other for everything used during play), all credits goes to the original design, i just adjusted properly for the newer cards edition ( small cards with…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x112.5mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.48mm and the Actual…
This is a convenient battery holder made for 14500 battery (up to 14.3 diameter batteries), and useful when you want to connect them in pairs. There is a version with some separator for batch of two and have less wiggle when welding…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 112.45x200mm in size You may print at higher layer heights below the Base Thickness of 0.72mm The Max allowed Thickness is 2.48mm and the Actual…
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 0.56mm The Max allowed Thickness is 2.56mm and the Actual…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x155.1mm in size You may print at higher layer heights below the Base Thickness of 0.8mm The Max allowed Thickness is 2.8mm and the Actual…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x112.5mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual…
To wszystkie aktualnie dostępne wyniki.
