Lithium 14500 battery holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for 12 batteries, open at the bottom to be able to solder strips
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a convenient battery holder made for 14500 battery (up to 14.3 diameter batteries), and useful when you want to connect them in pairs.
There is a version with some separator for batch of two and have less wiggle when welding strips. (batteries are also 0.1mm closer than the version with no sperator at the bottom)
I used PLA, 0.2mm with a 0.4 nozzle, 20% infill (below this value with only 2 perimeters wall i found it too “bendy” for my taste) and no support.
Very easy to print feel free to test out any settings.
(Can also be used for AA batteries, as a holder too)