Lithium 14500 battery holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holder for 12 batteries, open at the bottom to be able to solder strips
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 113
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a convenient battery holder made for 14500 battery (up to 14.3 diameter batteries), and useful when you want to connect them in pairs.
There is a version with some separator for batch of two and have less wiggle when welding strips. (batteries are also 0.1mm closer than the version with no sperator at the bottom)
I used PLA, 0.2mm with a 0.4 nozzle, 20% infill (below this value with only 2 perimeters wall i found it too “bendy” for my taste) and no support.
Very easy to print feel free to test out any settings.
(Can also be used for AA batteries, as a holder too)