Liczymy pasujące modele…
The light meter of the Rollei 35 can drain the battery if the camera is left uncased in a lit location. And if there is film in the camera you have to rewind it before you open the camera back to change the battery. That was a poor design…
The designers of the Mamiya 645 Pro (and related cameras in that series) did not bother to include a threaded port for a cable release. You could purchase a ridiculously expensive adapter on eBay, or you could print this thing for less…
There is a flexure latch to retain whatever device is mounted in the shoe. Clearances are small, so take care with the print orientation.
Maybe a good idea to print this with a fine Z setting, but try it for yourself. It works on my Nicca. On your Leica, not so sure.
The threads are quite fine, so print at high resolution.
The lens on the Fujica GS645 is not threaded for filters, nor can it mount slip-on filters. There is, however, a groove on the front of the lens housing that can be used to mount things. This filter holder engages that groove. This filter…
One holder is for a subminiature Minox C camera only. Compared to the official Minox accessory the camera is held inverted (because I keep my camera on a lanyard and I prefer to leave the lanyard attached when possible). The second holder…
This example was printed in CF reinforced PETG at 0.2mm layer height.
To reuse a 135 cassette, loosen the end cap at the short end of the film spool (carefully expanding the folded over metal with a knife tip) and take the end cap off without damaging the main body of the cassette. The spool may then be…
The hood restricts access to the aperture setting ring if you have big fingers. If that is a problem you would need to slip the hood off to change the aperture. The cap attaches with conical threads because I like conical threads. A…
A hard case for a minox model C camera (in the closed configuration) or the minox B in either the open or closed configuration. This can be useful, as the minox model B has the annoying property of wasting a frame of film if it is…
I suppose that the model could be better described as a shackle than as a carabiner, but shackle comes with a trigger warning these days. As a carabiner it has little in common with alpine equipment. The model uses a spring pin to hold…
A cap for a Jupiter-12 lens. It has room for an attached filter. I printed it in red because that’s what I had, but I recommend a more dignified colour.
This system assists with easy and consistent film development by enabling automatic agitation in a Paterson System 4 developing tank. It is sized for a NEMA-17 type stepper motor. I drive my motor with an Arduino microcontroller and…
A variation on an existing model, using less material.
I have tested the adapter with three variants of Hasselblad viewfinders and one example of a Kiev viewfinder. They are very similar, but the interfaces are not exactly the same. This adapter has sufficient clearance to work with any of…
Why a desktop altimeter? It is useless unless your desk is in an aircraft. However, the barometer function is useful for weather nerds, and it serves as a display for a nice instrument with a lot of numbers on the face. The instrument…
The telescoping Industar lens (intended for use on 35mm film cameras) can with appropriate adapters be used on digital cameras. An adapter will place the lens at the required flange distance from the sensor, so if the lens is telescoped…
Some manual coffee grinders have small capacity cups to collect the grinds. The Timemore Chestnut C2s is an example. This adapter enables the use of a larger catch jar on a C2s grinder. I do not know if this adapter fits other grinders.…
Note that the shade is recessed, and so may not be usable on other makes of camera. My example is printed in PET-CF, 0.4 nozzle, 0.12mm layer height.
Maybe sometimes you don't want to take that expensive Rolleiflex out into the harsh world. This adapter plate permits mounting a Lubitel 166 TLR to a Rollei pistol grip. The adapter is also angled 18 degrees from orthogonal, because I do…
Old Contax cameras have a metal ring on the rangefinder window that some users report can damage eyeglasses. This bumper threads onto that ring and is less likely than the metal is to scratch eyeglasses. The bumper is not threaded. The…
A device for measuring the length in cm of a path. The input wheel is marked in cm, the output wheel in tens of cm. Simply zero the device and then roll it along the path. A 1:50000 map is two cm per km. For axles I used some 1.75mm…
I printed the original version (a nice idea, but the wrong size for me) and thought that rather than scaling the original a new version was required to fit the No. 28 slide rule that I have. I suspect that the No. 28 is the most…
A cable release for the shutter is not often needed on a point and shoot camera, but here it is anyways.
If you practice celestial navigation on land and do not live within sight of an ocean horizon you might use an artificial horizon, or you might use an aircraft sextant. Aircraft sextants are not as accurate as marine sextants but can work…
Ok, I swiped my sidecar against an obstacle, and knocked off the hub cap. Lost it forever but luckily no bent metal. This file is for the 2014+ disk brake sidecar hub.
To wszystkie aktualnie dostępne wyniki.
