Wszystkie modele

Creative Commons Duality LED Track System Skins

These are the creative commons skins for my LED track system. Please remix, and share your own custom skin patterns. See Video:

Duality Infinity – Seamless 3DHex Skins (For Duality LED Track System)

3D Print an amazing modular LED track system with SEAMLESS Diffusers. Say goodbye to visible lines where the tracks meet. These diffusers fit on my Duality LED Track System. I'll show you how I designed, how to 3D print, and install these…

LED Matrix Display/Clock

I combined my passion for arduino projects and professional design skills to create an impressive dot matrix display/clock for my workspace. The project involved 3D printing, ARDUINO/ESP32 and addressable LED strip. I'll walk you through…

Duality HexGrid Pattern Stencil

Use this stencil to create your pattern for the Duality HexGrid system. I created this model so you can have your pattern figured out before downloading the HexGrid system.

LED Clock

Want to create a unique and futuristic time-telling device? In this video, I'll show you how to 3D print and build your very own ARDUINO controlled addressable LED strip clock! I designed it to have a clean look with a blank face and no…

Duality LED Track System - Track Layout Stencil

Use this stencil to help design and layout your track system. It is 1/20 scale, so once you use it to create your pattern, you can use the scale on the edge to get actual finished dimensions. For use with Duality LED Track System and…

Adjustable Vent/Damper

Use this adjustable vent to allow air or other gasses into or out of a closed volume. The slots are angled to create a vortex as the air flows through to help mix the air as it enters. I designed it for a 3D printer enclosure to bring in…

Untethered ROV

I spent over 1200 hours in the design, development, and build of this "Untethered ROV". Now you can reap the benefits! Please watch the video. I will add more info here in the coming days. This is a very well-rounded project for people…

Cable Wrap Cleats

Print two of these to create a cable wrap, for power cables, etc. I designed for a mobile camera robot cart, but there are plenty of places to use.

9mm Luger Ammo Case 150 Round Capacity

4" to Dual 2.5" (100mm to Dual 63mm) Dust Collector Hose Splitter/Adapter

Split a 4"(100mm) duct hose into two 2.5" (63mm) hoses. Integrated mounting bracket. I designed this for my router table. One hose for the fence and one for the router. It's a 3 piece assembly. Assembly is straightforward, but take a look…

Wall Mount for eero Pro Mesh System Router

This will allow you to mount your router up on the wall, out of the way and get a better signal. There is an interference fit, so the router just snaps into the mount.

Trumpeter 1/200 Scale Model Grand Staircase

Use this to construct a custom grand staircase. Especially good if you have an up scale kit.

Cable Grommet

Give a clean look to cables running through a hole. For 1.5"(38mm) hole size.

Bosch Router Dust Collection Boot with 2.5"(63mm) Hose Port

I designed this dust collection boot for my Bosch router when installing in its router table. I has a port that connects to a 2.5"(63mm) dust collection hose.

Ronin SC Gimbal Side Handles

The Ronin SC is nice entry level gimbal, but a common complaint about it is that you can only hold it with one hand which is awkward and limiting on what you can do. I designed this to be able to hold the gimbal with 2 hands, greatly…

Trumpeter 1/200 Scale Model Aft A Deck Floor Trim Band

Print and paint to trim where the floor meets the edge of the A Deck. This is especially good if you're using extra detail aftermarket decking.

4.25" Hose/Pipe Clamp/Mount

Clamp a 4" pipe or hose to a wall or other surface. I designed this for 4" dust collection hose in my shop. I haven't tried on pipe, but it should also work for that. Inside radius is 2.135".

Trumpeter 1/200 Scale Model Placard

I designed this for my model build a couple years ago, when I built a custom case. I mounted this on the outside of the case

Trumpeter 1/200 Scale Model Aft B Deck Floor Trim Band

Print and paint to trim where the floor meets the edge of the B Deck. This is especially good if you're using extra detail aftermarket decking.

Trumpeter 1/200 Scale Model Aft Boat Deck Floor Trim Band

Print and paint to trim where the floor meets the edge of the Boat Deck. This is especially good if you're using extra detail aftermarket decking.

High RPM Encoder Knob

I designed this encoder knob for my camera robot controls. I was using the most common encoder you would find if you search “arduino encoder” on Amazon. I wanted to be able to jog my camera quickly so I made the diameter large(32mm) with…

Pivoting Mount for FEELWORLD 7" Field Monitor with Tripod Adapter

I designed this to mount my 7" FEELWORLD 4k Ultrbright field monitor to my tripod and other things. Models include tripod adapter and fork mount for monitor as well as spacers and bearing mount. Side (pivot) thumb screws and tripod mount…

Drawer/Cabinet Placards/Labels

Feed your OCD with these drawer/cabinet labels. D-## are for drawers and C-## are for cabinets. Print the raised letters with a different color for better appearance.

Trumpeter 1/200th Titanic Model Mast Drill Jig

Use the jig to drill a hole in the masts for anchoring. Tap 3 M3 hole and secure mast with 3 set screw. Drill you hole.

Duality Track System Splice Connector Holder

Hold 18 Splice connectors in a neat stack. If you need to transport you connectors or just want somewhere to keep them, the can do the job. Zip tie holes for keeping it closed. Each row holds either one splice connector or 2 end blocks.

FPV RC Hovercraft

I designed this model to be large enough to work on multiple surfaces and transitions(grass, water, pavement, etc.) The hovercraft floats on water when the motors are off, thanks to the foam bumper and float assembly in the hull. Vapor…

Duality LED Track System

***Update: added "Evolution" expansion pack, found here: ***You can bundle the expansion and track system with this download: ***Update: added Seamless Skins -…

Duality Seven - Modular LED Clock and Display System (Now with WLED)

*Now including instructions on how to use with WLED. See video and pictures above. 3D print your own supersized LED Clock or 7 segment display with this downloadable fully modular kit and ESP32 with LED strips. Use my arduino code or use…

Duality HexGrid - Nested Hexagon Matrix System/LED Hexagon Grid

I created this system with the same personality and profile as my Duality Track System and Duality 7. **New files added 1/28/26. Hex-Grid now contains new models for NEST configuration (See New video). NEST allows you to run continuous…

Duality Evolution Pack

I created an expansion to Duality LED Track System, including curved sections, angled ceiling mounts, Vitality angle sections, two new diffuser patterns and more! Use WLED, ESP32, LED strips, and 3D Printing to produce amazing wall art…

Duality Track System Bundle - Original Track + Evolution Pack + Entanglement

The Duality LED Track System was developed to give creative license to all makers. It is fully modular, lending itself to full customization. Create any track layout, only limited by your imagination and available track sections! It is…

Duality Canvas

Build you own professional looking matrix with the models and PCBs. PCB Ordering Go to jlcpcb.com and click order now. At some point you will create an account. Please read "PCB Ordering" pdf in the download files. There are also order…