P
Printableskevman
Wera Hex holder Remixed to fit Honeycomb Storage Wall HSW
Remixed this great Wera holder for the Honeycomb Storage Wall.
- Pobrania
- 388
- Polubienia
- 75
- Ocena
- 4,75
Wszystkie modele
Liczymy pasujące modele…
P
Printableskevman
Pastamatic dual motor mod
My single motor just didn't have enough torque when the spool was more than halfway loaded so I remixed this setup for my controller and a dual motor setup. EDIT:added step files EDIT: Use this as well…
- Pobrania
- 241
- Polubienia
- 53
- Ocena
- 5
P
Printableskevman
Pastamatic winder power motor remixed for different controller
Remixed the enclosure for a different motor controller https://www.amazon.com/gp/product/B071H2YQG5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
- Pobrania
- 229
- Polubienia
- 33
- Ocena
- 4
P
Printableskevman
Hold down bracket(s) for main body
I wanted to be able to secure my winder, but didn't want to reprint the main body with holes so I designed this. Should be able to use a screw to secure this to a wooden board etc. Print with supports on build plate. UPDATE: 3/21/23 I…
- Pobrania
- 205
- Polubienia
- 32
- Ocena
- 5
P
Printableskevman
One way Gear Clutch for Motor Drive
A one way bearing to prevent brake torque on the motor drive. I have two options here, one is a separate gear from bearing ( in case you want to keep your existing gear ) and another is an integrated gear and bearing setup. You will need…
- Pobrania
- 199
- Polubienia
- 22
- Ocena
- 5
P
Printableskevman
3mm longer body and shaft
I couldn't get a good fit with my toothpaste tubes so I made the body and shaft 3mm longer.
- Pobrania
- 172
- Polubienia
- 20
- Ocena
- 5
P
Printableskevman
Labeled centering discs
I wanted to be able to quickly identify the discs so I used prusaslicer to add a label to them. Nothing fancy.
- Pobrania
- 122
- Polubienia
- 20
- Ocena
- 5
P
Printableskevman
Longer C920/C930e camera arm with hole for screwdriver
8-17-2020- I added V2 which has a stablizing leg that minimized vibration and shaking. I wanted to this stick out a bit further from my print bed than Magnus's original so I extended the arm I also made an access hole so you can use a…
- Pobrania
- 107
- Polubienia
- 9
- Ocena
- 5
P
Printableskevman
Stealth Press - New Iron Mount and modified strain relief
Mount for my regular IRON and Holes to accommodate M3 screws in the strain relief I modified the mount to accommodate my Hakko style iron (~18.1 mm diameter for the mount hole). I also had to modify the strain relief so I could get the m3…
- Pobrania
- 88
- Polubienia
- 8
- Ocena
- 5
P
Printableskevman
Two piece axle with bearing and captive nut.
I modified the gear side to be secured in two pieces with a bold and nut. I didn't like the idea of an M5 screw just embedded in the plastic and ultimately mine spun out. I tried a heatset but that didn't work well , so I came up with…
- Pobrania
- 75
- Polubienia
- 2
- Ocena
- 4
P
Printableskevman
Threadless M4 lock nut
I remixed my nuts so that there is no thread and it can be cut as you secure it to the fastener.
- Pobrania
- 62
- Polubienia
- 0
- Ocena
- 0
P
Printableskevman
XL Scrap bin
Wanted something a bit bigger so I remixed it in Tinkercad
- Pobrania
- 47
- Polubienia
- 4
- Ocena
- 0
P
Printableskevman
M4 RC style lugnut
This is an M4 threadless lock nut with a flange for more of an RC style.
- Pobrania
- 35
- Polubienia
- 3
- Ocena
- 0
P
Printableskevman
Rachet for Filament Transfer Winder Motor Drive and Spool Adapter
I loved this idea of the ratchet to save from brake torque so I remixed it for my motor setup. You have to mount the motor slightly differently so I used the motor mount from Diplomator. UPDATE: see my new model…
- Pobrania
- 34
- Polubienia
- 4
- Ocena
- 0
P
Printableskevman
M4 Locking Nuts, standard and low profile
Needed locking nuts for my RC car wheel axles. Low profile and normal height sizes in the files. Best if printed with a .25mm nozzle, .10 layer height, 100% infill.
- Pobrania
- 27
- Polubienia
- 0
- Ocena
- 0
P
Printableskevman
Toolbox V4 -10mm narrower
I love this tool box, but I couldn't use my Mk3s because of a print so I decided to remix it by making it 10mm narrower so I could fit it on my Mini with the supports. I also created one ath is 10mm x 8mm smaller. The mini has a Revo…
- Pobrania
- 26
- Polubienia
- 4
- Ocena
- 0
P
Printableskevman
PC4 Bowden Clip with M8 and M10 threaded holes
I need a clip for M8 and M10 threads so I remixed this.
- Pobrania
- 23
- Polubienia
- 1
- Ocena
- 3
P
Printableskevman
Nut aligment tool
I enjoy making this car organizer, but I HATED putting the M3 screws and nuts in as the nuts were hard to align and also hold in place. This little tool solves that problem.
- Pobrania
- 16
- Polubienia
- 0
- Ocena
- 0
P
Printableskevman
Individual STLs - WARNING READ
each part is its own STL. You should follow the orignal creator's instructions for print settings. WARNING THE HOLES DIDNT EXPORT - not sure but Bambu Studio doesnt export the holes from the orignal model. must modify to make this work.
- Pobrania
- 16
- Polubienia
- 0
- Ocena
- 0
P
Printableskevman
Remixed to fit my Nikko RC Plymouth
I love the idea of putting hobby grade wheels on these cars so I remixed this to fit my Nikko Plymouth Superbird. The rear fits on to the existing 3.5M hex by friction and then the existing 4mm axle can be used to keep the wheel secure.…
- Pobrania
- 15
- Polubienia
- 1
- Ocena
- 0
P
Printableskevman
Modified Arrow and Quarter Circle
I modified this jig so I could use a hex driver without a set screw. I also felt that circle was too big for my needs with my mini so I made it into a quarter and made the hole to fit the hex driver. Typically my bed level is adjustment…
- Pobrania
- 14
- Polubienia
- 1
- Ocena
- 0
To wszystkie aktualnie dostępne wyniki.