Liczymy pasujące modele…
I wanted an XBOX 360 controller stand similar to agepbiz's XBOX ONE stand. I found a 3d scan of the 360 controller, but it doesn't allow for remixes, so I can't attribute it. I made a rough stand and subtracted the controller from it in…
My kids got a Joyin Marble set for Christmas, and already want more pieces. It took a couple tries to get the fit snug, but it seems to vary piece to piece on the Joyin parts, so I'm not sure what the tolerance is. I'm in process of…
Welcome to Tectonic! The adventure game pitting players (or teams) against each other on a constantly shifting island. Tectonic is a 3d printed, modular hex-tile board game that can be as large or as small as you want. Each piece can be…
This piece is just a bunch of twisty spirals between the two posts. whole collection of all my marble run pieces is located here: https://www.printables.com/@brimstone326_3337638/collections/3392199 Category: Toy & Game Accessories
This is the second in a series of large bases for the marble run parts I've posted. This is a 250mm diameter base with four posts and a slope to collect the marbles. whole collection of all my marble run pieces is located here:…
I couldn't find any Twig Blight miniatures around, so I modified these to make some. http://www.123dapp.com/123C-3D-Model/Creature-Tree-Monster/1186150 http://www.123dapp.com/123C-3D-Model/Ice-Golem/768215…
My kids are big Wild Kratts fans. I remixed a vest before, but was never really happy with it. It was too hard for my kids to get the disks out once they were in. I added an angle to the back of the disk area to raise it up a bit and then…
This is one of several marble run spirals I designed. This works with any of my previously published parts. All are designed to work with the Joyin marble run set with the motorized chain feeder. Category: Toys & Games
I have several boats and found the armaments on Thingiverse lacking. I cut the ballista base from the Dragon Hunter wagons by ecaroth. I designed the base and post connections in solid works. The boats pictured are the Maiden's Gambit…
This is a set of twisty parts that I designed for my kids. One of my boys wanted a marble race that would let the marble roll up the side wall a little. These don't do that. In fact, they're more interesting to look at than the marble…
I converted these files found here: http://www.models-resource.com/ With this free utility: http://www.greentoken.de/onlineconv/ I checked the Slowpoke in solid works and only the teeth look questionable. Category: Video Games
This is another set of parts made to be compatible with the Joyin Marble Run set with the motorized lift. The Ferris Wheel and Scoops towers require some assembly. The wheel is keyed to fit one way. You need two inner hubs and they have…
This is one of several marble run spirals I designed. This works with any of my previously published parts. All are designed to work with the Joyin marble run set with the motorized chain feeder. Category: Toys & Games
My kids wanted a station or building for the wooden tracks we have. I modified a track here: https://www.thingiverse.com/thing:1938409 for the base. I tried to tag this as a remix since I used atoomnet's 144mm double track as a base for…
I designed the shuriken for my kids the other night and thought I could easily make it a fidget toy, so here it is. I had to make a smaller version because my kids' hands are quite big enough to free spin the regular version. Category:…
I needed a stand-in for the goblin wolves in Lost Mine of Phandelver. I have goblin hounds, but they look pretty sad and they have riders. I've printed the demon dog mini before, but I wanted a better base for it and better connection to…
I found the original mold and thought it was a great idea. I didn't like the blank back, so I mirrored the design side and joined the two with a hinge. I printed this without supports and at 0.1 layer hieght. It worked perfectly right of…
I got a request to create a large base for the marble run pieces I've posted. This was my first idea before I got all the input. I have two more in the works and a few other parts as well, but I'm going to need a few days to print…
My kids were playing with the Planeswalker board games and I thought I'd make some of the tiles. I printed one I found here, but it had straight tabs and it didn't actually lock. So I made my own. It took several tries to get a good fit.…
This is a collection of remixed Dr Strange stuff for my son's Halloween costume. I didn't want to add lights or have to deal with moving bits. He's not going to have time to show that off going door-to-door. I removed the hollow space in…
This is another marble run piece. The bridge is four inches across on center to fit any of the other standard Joyin parts. The peg height is 63.5mm (2.5"). The spinner gate should allow the marbles to go to either side, but my print seems…
This is another marble run piece. The peg height is 95.25mm (3.75"). This part splits into four tunnels internally and returns back to a singular exit spot on the bottom. whole collection of all my marble run pieces is located here:…
My younger kids have just gotten into pokemon and we just started the cartoon, so of course, I can make a pokedex. Rather than start from scratch, I used fergal_kelly's model and imported it into Solid works. I wanted to make it able to…
These disk holders were designed around the disks in thystonius' Creature Power Vests and the remix I did on that design. The short container will hold 10 disks and the other type holds 20 disks. I've test printed all of these and will…
My sons got these Brio trains that are much longer than the standard engines. So they don't fit on the tiny round table that we have. I desgined this in Solidworks, using a cross-section of a straight track to make it. The track width is…
I really liked the original design and printed a couple, but I had a lot of issues with some of the threads. I imported the whole thing into Solid Works and reworked it. I combined a lot of parts, which now need support, but the clean way…
My kids want to be ninjas for Halloween this year and the costumes didn't come with any accessories. I looked for shuriken/throwing stars here and most had sharp edges. I designed this in Solidworks and rounded all the edges down. It was…
My youngest wanted a Mudkip, so I made one: https://www.thingiverse.com/make:506972 My oldest suddenly wanted a Mega Evolved Swampert.... that was a little harder. The original model I found on models resource had a rigged version, but…
I mostly just traced the image in solid works and extruded the surfaces to different heights. Made 2 for my boys as large as it would fit on my printer. Category: Toys & Games
These models were not made by me. They were made by 3dprintguy ( http://www.3dprintguy.co/ ). Someone requested that I make a support based type like I did for the Mr. Meeseeks models: http://www.thingiverse.com/thing:2006850 I was able…
This is a color mix print for a Bambu with an AMS. The objects are printed by color on each layer. This print uses a dark color for the outline (usually black, but I've been using a dark blue I have), and translucent red, yellow, and…
I finally was able to get a good image as a base. It isn't 100% accurate, but it should be close. I decided I would remix the original to keep the styles of hexes separated. I will add the other variations as I get them made. Category:…
This is my second attempt at this. First one didn't upload I guess. This is a 50mm square spiral stair for HeroQuest. I do not have the original board anymore, so I have a mockup on 1" graph paper for the time being. As such, none of the…
I really like a lot of Earsling's work, but I especially liked the Roman Archway. I wanted more compatible pieces to go with it, so I made these. I used Meshmixer to mirror the original piece. I used Netfabb Basic to cut the parts and…
My kids really like the Wild Kratts and asked for creature pods. I made a simple version for those who just want to print it out and maybe paint it. The split version was designed so I could print a "clear" screen to slide in. I'm not…
This is just a half-sized version of the original with a double thick belt clip. Category: Toys & Games
It took a couple tries to get the angled foot to print properly. The supported Yoshi is about 90mm tall. I printed it at 0.2Layers, 10% infill, and a 4 wall thickness . I will probably bump the infill a bit on the next print. This model…
I liked justuspr's DND Longboat, but I wanted to be able to make a few different types and thought I'd make my own. This is my first stab at making a boat in Solidworks. I used the basic size of justuspr's model for reference. I may…
After making the megabases, my sons asked for a top plate that would fit the megabases and drain out to the sides. This is a little smaller than the bases in diameter. I wanted the drain points to be at the edge or as close as I could.…
This is another in a series of color mix experiments with translucent filament. This uses red, yellow, and blue translucent colors to build up the layers to make all the color variations. I used Inkscape to convert the line drawing to a…
I've been kicking around the idea of teaching either a 3d printing class or 3d design. Attached is a PDF tutorial to design the part pictured. It is a remake of the MarbleRun parts I posted originally, except this one is modeled entirely…
I really liked the armor made by 3Dforlife, but the first two sets I made split while trying to remove the supports. I modified his armor and made the neck plate thicker (which helped a lot). I added the tribal versions just for kicks.…
My kids asked about some Lego heads that we found here on a variety of listings. Most of these failed to connect properly so I attempted to size as close as possible to actually fit a figure's neck post. Most of these are extracts from…
I ran the intro to Pathfinder from an old boxed set with my kids and started working on a Ruins of Raven's Watch adventure (the map they give you in the GM's guide). I decided the cultists would have experimented on some monsters before…
I made this from a game file I found. It's from the Mighty Pups Saves Adventure Bay video game. I made two versions. Meteor halves with pins for traditional printing and a hollow version for resin printers. I was going to print the resin…
Since the two previous Pokedex's I made were remixes of someone else's work. I decided to try one on my own. My boys have already requested another, so there may be a series of these eventually. This design is based on the hinge and pin…
My kids got the GX Flareon / Jolteon / Vaporeon tins for Christmas. It fits a stack of cards in one pocket with room to spare and plenty of room for the GX card and tokens in the side pocket. It could be a little more snug. The insert can…
First off, I did not make these models. They were made by 3dprintguy ( http://www.3dprintguy.com/ ). I was looking for a better Rick model and found his website by accident. His models appear to have been designed for resin printing. They…
Welcome to Tectonic! The adventure game pitting players (or teams) against each other on a constantly shifting island. Tectonic is a 3d printed, modular hex-tile board game that can be as large or as small as you want. Each piece can be…
This is another in a series of color mix experiments with translucent filament. This uses red, white, and blue translucent colors to build up the layers to make all the color variations. I used Google Gemini to create the black and white…
This is another stained glass design that works by layering the primary colors to create the various shades. This is not a layered print that can be printed on any machine. It requires an AMS. The original design is black, red and yellow.…
I was asked to make a few variants after my ninja star spinner.... things that were less pointy. Category: Toys & Games
I designed this entirely in Solid Works in about a day. I haven't gotten to all the weapons as my son wants specific items and I just made the missle rack for simplicity. This item is not to scale of an actual product. It's mostly based…
I wanted a dwarven-themed sarcophagus for a dungeon crawl. I didn't do anything special except to slice up the parts in Netfabb and reassemble and resize them. The arms are a bit off because I moved the hammer closer to the statue body.…
The original dragon glass was my very first stained glass attempt using the color mixing I was testing. It is only 0.8mm thick, so the colors are light and the mixing options are limited. This new versions is 2mm thick like most of my…
This is another in a series of color mix experiments with translucent filament. This uses red, yellow, and blue translucent colors to build up the layers to make all the color variations. I used Google Gemini to create the black and white…
This is a gold doubloon from a Jake and the Neverland Pirates coloring page I found. I used Inkscape and Solidworks to make it. I printed without supports and it turned out ok on the bottom face. Category: Toys & Games
I didn't like the excessive fill on the original. This cup is more hollowed out than the original. I modified some of the proportions too. Category: Toys & Games
Spike trap... just a simple token to poke some PCs. Category: Toys & Games
This is based on the Hirst Arts Ruined Tower. I found a model of it and several other Hirst Arts buildings on the Sketchup warehouse site, but none of them were manifold and I couldn't get any to be remotely printable. I used the floor…
This is a set of various bowls/funnel to drop marbles into the marble run chutes. Category: Toy & Game Accessories
This piece forks before a pair of corkscrew turns and the paths merge before the exit on the opposite post. Category: Toy & Game Accessories
This is another in the faux stained glass pieces I've posted. All the color mixing is done with red, yellow, and blue translucent filament layers. I used black PLA for the border. You will get errors for floating regions, but it is…
I modified the 10th anniversary Benchy step file on Makerworld into one of my Marble Run pieces. I optimized the view of the marble by cutting windows through the boat. It moves pretty fast, but in a full set-up there would be plenty of…
Picture is a bit bluer than the actual print. The dark blue sections are actually purple. I'm printing an inverted version with the red and blue colors swapped. This object is intended for an AMS. The included .3mf files are for a Bambu…
I recently picked up the Marvel Multiverse RPG and wanted to have some models to go with it. Most of my HeroClix from years ago did not survive the years or my kids. These models are scaled as best as I could to HeroClix models I had on…
I need a baboon figure, there was one here by MZ4250 in his animals collection, but I found it and the ape were difficult to print and remove the supports on. I ended up splitting the ape mini and basing it separately. I found this museum…
I've been tinkering around with bits to use for terrain. None of this is my work. I just merged a few models together, resized, and reduced the triangles. At the size I made these, the details are fuzzy, but they make great weathered…
Last weekend, my son asked for a spaceship that could seat four Imaginext figures. Just shy of a week, and 20 ish hours printing on a Bambu P1S and I was able to deliver. This ship is entirely designed in Solidworks. I printed the turret…
My kids got out the old bucket of Lincoln Logs and asked if I could make some parts. This set includes full and half versions of each standard length log, a door, and a window. The door and window frames are halves, so you need two for…
This is mostly an experiment. I wanted to design a supportless spellbook container for dice and what not. I haven't made any dividers or anything for it yet. This is a proof of concept. The screws to secure the cover to the main body are…
Welcome to Tectonic! The adventure game pitting players (or teams) against each other on a constantly shifting island. Tectonic is a 3d printed, modular hex-tile board game that can be as large or as small as you want. Each piece can be…
This is the third component in the series. Attached is a PDF tutorial to design the part pictured. It is a remake of one of the MarbleRun parts I posted originally, except this one is modeled entirely in Fusion 360. Collected here:…
This is a color mix print for a Bambu with an AMS. The objects are printed by color on each layer. This print uses a black for the outline and translucent red, yellow, and blue. The color layers are built up red, yellow, and blue and make…
My kids just got a set of these tracks, and like all kids they'll want more parts to change the set-up. There were some errors with the original tracks by TheCharlesChen and I noticed while checking the cross intersection that the real…
I wanted to make a modular tower that I could print and possibly re-arrange later if the need arose. I could probably (and may eventually) do other polygons, but for now I have a 12-Sided tower that can be built as high as you're willing…
My son loves Terraria, and asked if I could make this after making the Moon Lord skull pendant. I need to finish painting it, but it turned out pretty well. Enjoy! Category: Toy & Game Accessories
Goofles version of the Toodles model, by request. Category: Toys & Games
Like many people right now, I have the option to work from home part time to reduce the number of people in the office. I got to see first hand what my wife has already been juggling for a week as we both work and try to maintain our…
I used the screen braces file from Dutchmogul's Cyvasse set as posts for the corners of the altar. Otherwise it's a fairly simple design. I added the symbols using googled clip art and http://3dp.rocks/lithophane/ Category: Toys & Games
This is modified version of my original Star Penholder. I wanted it to have a cleaner curve to it, so I added multiple planes and alternated the sketches from zero to 15 degrees. The curve is much cleaner.... I haven't printed this one…
Just a few simple terrain bits. I used Solidworks to make them. I noted the fonts used on the two with text.. I had an Elvish Runes version, but the text caused overlapping areas it couldn't figure out how to handle. Too late to fix it…
Welcome to Tectonic! The adventure game pitting players (or teams) against each other on a constantly shifting island. Tectonic is a 3d printed, modular hex-tile board game that can be as large or as small as you want. Each piece can be…
My kids got out the old bucket of Lincoln Logs and asked if I could make some parts. I designed these so they could add a second floor to some of their buildings. Category: Toys & Games
This is the fourth instruction in the series. Attached is a PDF tutorial to design the parts pictured. This instruction builds on the previous three. It walks through saving the files as copies and modifying them to be new designs.…
This ended up taking longer than I expected. I had to delete a lot of overlapping faces in the mesh. I also had to reduce the number of faces dramatically to get it to import into Solid Works. Not a huge improvement over the original, but…
This is a double door version of my previous model Imade for use with dungeon tiles. There is a barred gate and a solid wood door version (shown half and half in the pictures). This may require a little sanding near the radius edge where…
This is a Magic the Gathering version of the Yu-Gi-Oh card holder I designed. http://www.thingiverse.com/thing:1562409 You need to print two of the holders and slide them together, then insert in one of the bases. EDIT: 06/24/19: I added…
This is an AI-generated Spider Monkey figure. There is an odd bit where the tail connects that is not 100% correct, but you can only see it if you look at it's butt. It was designed with a prompt to make it like a Skylander-style…
This is an AI-generated Cyborg Parrot figure. It was designed with a prompt to make it like a Skylander-style figurine. Category: Toy & Game Accessories
I made this to go with the Sci-Fi platforms I posted recently. This just sits on one of the large platforms. It does not have a floor of its own. I may make and add variations as I go. The doors and windows were intended for resin. They…
This is my design made to be compatible with the To'ka Cloning Station by WarScenery. I tried making variations of the original with some success, but can't share those due to the derivative licensing. I originally modified their model to…
I introduced my kids to Pathfinder over the weekend and my 7 year old wanted to make his own adventure. He "needed" a tiger and some skunks. I couldn't find any decent whole models for either so I made this one from a scan someone posted…
I wanted an intimidating mini for a T-REX so I mashed together a bunch of things on a base I made in Solid Works. I left the blank base for anyone who would like to create their own. The scale of the alien flora wasn't optimal and only a…
My son asked if I could design a Prison bottle. This is based off of a sketch I found on google. EDIT: 11/12/17 I made the neck of the lid too short to fit in the neck of the bottle. V2 for each part have been added. Category: Toys & Games
My younger kids have been fascinated with Subnautica since seeing my older boy play it. Everyone in the game seems to have left behind a PDA with clues in it. This toy is designed to allow standard 3"x5" note cards to slip-in as a custom…
This is an AI-generated rat figure with a bacon sword and pancake shield. Warning: the arm holding the pancake shield is inside the pancake stack. and the feet have a different number of toes. It was designed with a prompt to make it like…
My kids got out the tracks I made several years ago and asked for a vehicle that would fit the characters, but also fit on the tracks. I did the best I could. The vehicle is a little long for the slopes, but does fine on the standard…
This is probably the most difficult pokedex I've made so far. I tried to keep the size compact, but due to the folding areas, I couldn't split it easily. I had to print the base upright with a large brim and support. Removing the support…
I made some dungeon tiles from some interlocking floor mats and needed dungeon doors. This is a modified version of the 12-Sided Tower door design. Category: Toys & Games
