Liczymy pasujące modele…
A small handheld spiky roller of sorts. Can be used in kink, for sensory purposes, or whatever else you want to use it for. This version has more spikes + a loop to attach a strong/lanyard.
A small handheld spiky roller of sorts. Can be used in kink, for sensory purposes, or whatever else you want to use it for.
I designed this for my middle finger that had pain in its PIP joint. The rough dimensions of my finger are labeled in the screenshot that I took (it says “m” for meters, but it's really mm for millimeters—Blender is weird). I recommend…
A riding crop for the lovely horse(s) in your life. Complete with an octopus arm inlay design. I printed this in Wood PLA and added a mahogany stain, rub-n-buff on the inlay, and finished it off with a gloss clearcoat. For the leather,…
Platform originally made for my friend's hermit crabs, but can work for a number of small critters. I printed this on a P1S. It works best being printed upside down with the ramp along the back of the printer. Tree supports recommended.
I couldn't find a well-made helmet holder 3D model that I liked so I made my own. It has a hook for your keys but due to the printing orientation it's not very strong, so just be gentle with it. I designed it to be printed without…
I designed this as a climbing stick/log for my friend's hermit crab. I would imagine it could be used in various other animal tanks/cages. It is about 12 inches (305mm) long and 1.5 inches (38mm) wide. I printed mine with fuzzy skin. I…
Kodama based one of the Kodamas in Miyazaki's Princess Mononoke. I print in white & then use a black marker to fill in the “eyes” or spots. They're fun to hide all around town~
Refillable dish wand holder that sits on the edge of the sink to drain into the sink. I didn't like the ones that held the wand upside down so that the soapy water gets all over the handle, so I made my own that doesn't have that problem.
I made a CC1101 for my Cardputer ADV following Ray J's tutorial on YouTube and decided to design a case for it. Here's the tutorial on how to make the CC1101: Can be printed without supports. I believe the spacers I printed for the device…
Remixed this model from @NeilR_282854 who got it from schindi77. I removed part of the model so that you can still access your SD/battery compartment while it's mounted to the camera, added the pegs that fit into the bottom of the camera…
Simple Wood Grain Coasters ~ Made with Blender Geometry Nodes I printed these with a wood PLA then sanded them and stained them with a mahogany stain before adding multiple coats of clearcoat. I then added rubber feet to make them feel…
I made this for my PSU that powers my Chinese diesel heater in my van. Wraps around the power supply and uses 4 screws to mount to the underside of my table, but it can be screwed onto a wall as well. Print with supports.
Rats love to use toilet paper to nest in, so I made this for them to take what they need to play/nest with. It was designed for use with a critter nation cage. Print 2 so that you can sandwich the toilet paper roll in between them. It is…
I printed this for my Black and Decker Dustbuster handheld vacuum so that I can vacuum small crevices and into tight areas. I printed mine with TPU, it should work fine in PLA or other hard filament, but I feel like it would work best…
Mount the mount to the wall with 2 screws, the cup then slides in to catch bottle caps from the bottle opener above. I printed mine in Wood PLA, then stained it with a mahogany wood stain and finished it off with a gloss clearcoat.
I made these to keep my Yeti cooler from tipping over in my van while I'm driving. Print 2 to fit in the front feet. No supports. Print with high-temp filament if you plan on leaving this in a hot car.
Quick and easy replacement nasal spray clip. Designed to fit nasal spray bottles that have approx a 14.4mm diameter & 5.3mm height. Best to print with TPU, but I'm sure it would work with PLA as well.
I made this to hold a single vial that has a diameter of 16.5mm for propagating my string of hearts.
Fairly easy to print. Mine had some issues with the nozzle running into the model where the hex walls were curving up causing some layer artifacts and minor splitting, so I would consider enabling z-hop. I printed without supports.
I designed and printed this outdoor critter feeder to hold black oil sunflower seeds (or similar) to feed the various critters in my backyard for my cat to have something to do while I am at work. So far we've had squirrels (Twix "the…
I downloaded and used one of these to hold my OGX bottle a couple of years ago but they changed their bottle/cap design slightly so I made this to hold their newer cap design.
To wszystkie aktualnie dostępne wyniki.
