Liczymy pasujące modele…
It is not HSW compatible. Recommended print settings: PLA, 0.6 nozzle, height 0.42 mm, 2 perimeters, gyroid infill 15%, 4 layers top and bottom, and no support except the switch and AC connector areas I liked @LudekSlouf_2081788's remix,…
I really liked the lid risers from https://www.printables.com/model/1001693-flashforge-riser/files , but I found them a bit brittle with only a small tether on the ends from top to bottom. My remake wraps the tether around the side for…
It uses a mounting for a 5015 24V fan, though a lower voltage fan and regulator can work I liked this type of duct, but all had the flapper used by the PRO motherboard. Several printed the duct closed, and if supports were used, cleaning…
I tried a few supports with minor issues. They tended to drop down, and once the HotEnd hit the support and the print was trashed. I added magnets to hold it up and glued a second one to the plexiglass top. Never drops now. A diagonal…
My WEN drill press column is 48mm, so a new clamp was needed. While I was at it, I beefed up the adapter holder. I also made an open-ended shroud. Hope these help someone.
I made my Air Monitor with 3D printing in mind. Because I do use ABS and ASA monitoring, Formaldehyde seems a must. Some code is sensor-specific but easily changed With " reboot_timeout: 0s " ,( no "s ) in both the api: and wifi:…
If you use the deburring tool noted, you probably have the spare blades separated from the tool. I found that to be the best way to lose the spares. SO I designed a simple case to keep them together. It can hold 16 blades and the tool.…
My Kleg PocketHole Jig came packaged in a bubble card and needed a storage container. This was my easy solution. Easy printing, no supports needed. I include the Sketchup files if you want changes, go for it. The slide is beveled for easy…
To wszystkie aktualnie dostępne wyniki.
