Liczymy pasujące modele…
This is a randomly generated business card tree, based on Thingiverse's Customizable Tree , which I modified in this remix to make it more random. I just added “leaves” to the tree with a notch for holding the cards. It can be customized…
Quick howto print planeur15_crochet.stl, preferably in PETG, in vase mode with 0.18 layer height, 30mm solid bottom at 20mm/s with cooling fan enabled at full speed. print lanceur.stl normally in PLA (0.15 layer height, 2 perimeters, 10%…
Here is my solution for a silicone caulking tool. I'm rather satisfied with the results in my kitchen, so feel free to try ! Several chamfer sizes are available (I used 6mm). I believe that this shape design makes it easier to succeed in…
Chain-like models have been proposed to approximate various contours using a sequence of connected straight segments, instead of the step-like approximation used in traditional contour gauges. The present model goes one step further by…
2025 Update: improved shape with more rounded corners. It's so much easier to carry a pair of skis when they are attached together… Plus, I prefer to avoid rubbing the edges against one another. Those small, lightweight ties achieve that.…
It's always frustrating to accumulate dull drill bits: they are completely useless, but it would be annoying to throw a bit which would potentially be as good as new with a small amount of grinding. However, properly sharpening a drill…
This marble maze is a 3d maze where the marble can travel along each axis in a cubic lattice. It is not especially a dexterity challenge as the marble can be easily moved step by step to discrete positions, on the other hand having a 3d…
This is a manual tool for finishing a 45° chamfer. It requires four m3 screws for tightening a sandpaper stripe, which should be just a bit larger than the chamfer (extra space is made in the design to this end). The triangle shaped sides…
Modèle de forme proche de l'original, compatible avec la partie mâle d'origine, avec quelques changements pour l'impression 3d. Ces petites choses ont une fâcheuse tendance à casser quand on marche dessus… Impression en position verticale…
I bought the wrong disks of my Proxxon micromot 230/E, so I made this adaptor. Print the nut twice (with 0.1mm layer height as the spindle thread pitch is 0.75mm) and use two 12mm wrenches (one flat) to tight them. The nuts have a…
One thing that can be difficult to achieve with a disabled hand, is clipping the other hand's nails. Some commercial helpers exist, but I thought that there was room for improvement, in particular for people with weaker arms (and hard…
Just added an m4 mounting hole to one of the most famous 3d models to use it as a cabinet knob ! Thanks to iqless for providing an OpenSCAD friendly version of Creative-Tools' 3DBenchy model.
An update to my previous Big Flaky Rocket model . I have reworked the snap-fit system to make it better, and more tolerant to multiple assembly / disassembly cycles, making it more usable as a toy. I also further decomposed the bottom…
One of the four locks of this lunch box was broken… so I cleaned up the remains of the broken live hinge, and made this simple clamp to retain this side. Contrary to the original lock, this one should be inserted in the bottom of the box…
I am very impressed by the Gyroman concept, and wanted to build one. But I was too lazy to assemble the two legs, four horizontal bars, and link part with 16 screws, so I made this version which replaces all that with a single printed…
Version 2 The first prototype had a few issues, so I modified the design and printed a new one. The new model has an identical outside shape, but has a lot more void inside to allow some air flow to cool the bulbs (the original version…
Many toys are made to amuse kids, but not the engineers who build them. This one is dedicated to entertaining engineers ! Here is a short presentation video I have long been fascinated by the idea of compressed air energy storage under…
Something always worries me when looking at electronic circuits. Of the three kinds of passive components: resistor, capacitor, and inductor, the last one is always far less represented than the first two. Why ? After some thinking, I…
I just wanted to share this very simple technique : cut common empty spools into halves and glue them on the sides of Esun refills, to spare some plastic. The majority of my 1kg spools have a 90mm small diameter that fits perfectly inside…
Warning ! Build / use at your own risks, fire hazard ! do not leave unattended ! Intro I wanted a cheap, practical solution for drying my filament. This design brings the following: can be used while printing easy setup: no need to remove…
Z homing precision issue After some time using the Ender 3 printer, I have encountered a quite annoying occasional issue: the z homing sometimes vary by a small offset, maybe 0.1 or 0.2mm, causing a bad first layer when starting a print.…
Yes, it meshes ! (kind of)
This enclosure provides effective isolation for heat, noise, nasty fumes, and dust, while preserving the minimalist look of the printer, and the 360° view on the printing process. Prerequisites A number of changes are required to allow…
I just bought this removable mudguard set from SKS, and I found it difficult to adjust the placement properly. The first tool (use as a pair) helps by keeping the mudguard in the right position, perfectly aligned with the tire, while you…
Many thanks to HyperX for letting us customize their product to our taste ! I designed this for the fun, so although I tried to match the chassis dimensions and anchors so that it could potentially work (with a bit of luck), there is room…
Warning! This model has a cooling issue, use the new version instead After some time using this, I had to replace several leds that failed, most likely because of insufficient cooling, so I cannot recommend it, unless reducing the current…
Quick start For a single m x n drawer box, the required parts are: one back part of dimensions m x n , with all four sides female ("ffff") m+1 side parts of size n , with both sides female ("ff") n+1 shelf parts of size m , with both…
My first attempt to light my FLsun SR's build plate had insufficient cooling, the leds eventually failed. So I'm doing it slightly differently with the same leds : I discarded the heat sinks which appeared to be too small (at least for…
To wszystkie aktualnie dostępne wyniki.
