Liczymy pasujące modele…
Create you Star Wars Ep. IV - A New Hope - Trench Run framed WallArt. You'll need a picture Frame from IKEA (RÖDALM, 54x27 cm), and double sided adhesive tape (or glue). Print 40 Tiles (in any combination to your liking) of the 12…
Saw simple version of a dicetray on reddit, and was inspired to design version with a magic/alchemy theme. Made in blender, printed in eryone sparkly purple (octarine?) PLA. Holds up to 14 dices (25mm). The slots have symbols of alchemic…
A tiny but stable stand to display beautiful Alice's beautiful Vorpal Blade Instructions I printed it laying flat with support. Then just add a vorpal blade. Category: Props
The uhura earpices I found so far just didnt hit the right spot, so I made one that fitted my tastes better. It derives a bit from the original design from TOS, but actually I like it better this way. It prints in one piece without…
The original build would have taken too long to print for a next day present, so I rummaged the garage and found an unused standard pvc water pipe. 50cm long , 11cm diameter. With this as a base for a lighthouse I only had to print the…
In https://www.thingiverse.com/make:839579 the braid piece was missing. So I modelled it from pictures.
For ease of access to the filament while loaded in the PTFE tubes I really liked the 'Prusa MMU2 PTFE Holder M10 Passthrough Adapter' ( https://www.thingiverse.com/thing:3233579 ), but in my own setup I just cannot reach the back of the…
The initial model had a little claw outside to hold the cables, and that kinda works, if there is no stress on the cable. It didnt fit to my cables (3.5mm / BOBOVR) though, and I wanted something that stood out less, and provides better…
I was inspired by LWCs splitter adapter approach, but had I few ideas of how to make a version that is easier and faster to print in different materials and is (marginally) lighter. Also I prefer long clamps on the thin part of the…
The tiny version. So tiny a dwarf could get it into his shoe. Print FULLsize for a very tiny SpinalTap-Henge for your desk, or scale it down to 50% to wear it as a charm for a necklace.
Recently I dug out the old boardgame ‚Shogun‘ (1976 by Teruo Matsumoto) from the attic. And while the game concept itself is ageless, the look oft he game sure is not. Also the magnet based mechanic feels a bit gimmicky and it actually…
The tiny version. So tiny a dwarf could get it into his shoe. Print FULLsize for a very tiny SpinalTap-Henge for your desk, or scale it down to 50% to wear it as a charm for a necklace. Category: Props
Separating your ptfe tubes not only looks neat and clean, but also helps to avoid entanglements and allows for a better filament flow. There are already numerous versions of ptfe tube separators, but they are all somewhat locked when…
I like my phasers phisplayed phorizontally, so I made a phaserstand phith a 20 phegree phangle. Works with: https://www.thingiverse.com/thing:3322199
For ease of access to the filament while loaded in the PTFE tubes I really liked the 'Prusa MMU2 PTFE Holder M10 Passthrough Adapter' ( https://www.thingiverse.com/thing:3233579 ), but in my own setup I just cannot reach the back of the…
A stand for your favourite lightsabre. Fits for all lightsabres in original scale. Stand with logo of the order of the jedi cut out. Nametags are optional and can be changed. Printed in PET because of the beautiful sci-fi look of the…
All Hail and Glory to Arstotzka! 'Papers please' is an awesome litle Indie-Game on Steam. You might want to check it out. UPDATE: Added a foot for the emblem, so you can display it prodly on your desk. Category: Games
The FIFA soccer world cup goes into the finals, and it's time to step into the action. Grab some pencils and some colleagues, friends or kids, and keep up the game in the half time break. A you have the pencils ready you can just draw a…
Made for simple stunt lightsabers with a hilt diameter of 33mm-35mm. Printed with 3 perimeters ans 20% gyroid infill. PLA will do PETG might be more robust. No supports needed. You will need an M5x20 screw and fitting nut. I added a thin…
When I had my pocket operator in my ... pocket, I was worried about the delicate potentiometers and the crumbles and keys in my pockets in general. So I made a travel guard that slides onto crashdebugs case. Print the tolerance test bit…
I like my phasers phisplayed phorizontally, so I made a phaserstand phith a 20 phegree phangle. Category: Props
EDIT I pulled the actual .stl files, because there seems to be a copyright from a design studio that commercializes that design already. That feels a bit counter productive for such an important message that needs to be in public focus by…
For all your bowlingpinny needs. The curves and dimensions are reworked and it is scaled down to fit in a humans ... hand. But this is pure conincidence. Instructions I printed it in in vase mode / hollow, with 4 perimeters for stability,…
Depending on your lightsabers design you might have an open barrel plug for charging. it might fit into the overall design. But if it does not, just print a plug to cover it or makes it look like an additional button. In addition it keeps…
Please note: the sign pictured in the photos is NOT the one in the printfile due to copyright reasons. The printfile shows an alternative version. Print it with a colorchange for better visibility.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/0ryOeTNyzKU Category: 3D Printing
A rather simple doorknob to replace the old ones on my printer enclosure wall cupboard. You will need M4 nut and screw. Just slide the nut into the slot, and you can fit it to the door with the screw.
Various entries online confirm that the plunger for the kitchenaids grater attachment tends to break occasionally. The replacement is pretty expensive and it takes weeks to get them to send one, enspecially to europe. If only we had the…
The landing gear absorbs the shock of rougher landings and spreads the forces onto a point nearer to the middle of the cross. It is spring loaded with common household rubberbands, and cam be clipped on the drone without glue. It can be…
For our upcoming 3d printer faire (see last image), I wanted to make a little display to protect my favourite prints against too curious fingers. I had some plexiglas laying around, so I came up with a cylindrical display that prints…
made for a whiteboard with t-slots in the frame. width of the slot is 5mm, width of the pens is 18mm. Instructions print in two parts, push together, insert into t-slot. Category: Office
3D printing is not food safe not matter what materials you use. Please coat your print in a food safe and washable material like silicone before using it.
A rather simple doorknob to replace the old ones on my printer enclosure wall cupboard. You will need M4 nut and screw. Just slide the nut into the slot, and you can fit it to the door with the screw. See…
I use some mobile apps instead of paper to play written music, so I wanted to replace the foladbale paper holder thing from my music stand with a phone holder. I already had printed this phone mount system:…
Derived from the original (thing:68139) I kept the base and changed the hanger itself. It does not come in the way of the tealights heat any longer. Backlight-effect is still the same and still beautyful. Instructions Just print the…
I use some mobile apps instead of paper to play written music, so I wanted to replace the foldable paper holder thing from my music stand with a phone holder. I already had printed this phone mount system:…
Simple wall mount for the AIM controller. UPDATE Some said that it is pretty tricky to attach this to a wall. I managed to do it with a screw anchor, and an angled screwdriver, but yes it was fiddly. But now I added a second part, to make…
strapholders to attach elastic or velcro straps to the sub-zero mask ( http://www.thingiverse.com/thing:417725 ) Instructions print both and glue them to the sub zero mask. Then attach a strap. Category: Accessories
The romans are here! They come to your land, build palisade forts and rise their standarts before your very eyes. Now its time to tear their forts down, to burn their flags and to kick them back to where they came from. ROMANES EUNT DOMUS…
What would fit better to the door for the cabinet that houses my prusas than an open hardware doorknob? Super sturdy, easy to grab, and pleasing to the eye (more or less, form follows function) You will need M4 nut and screw (maybe a…
A simple snap-on latch for my printer enclosrue wall cupboard doors. (See the fitting doorknobs here: https://www.thingiverse.com/thing:3586949 ). Slides over the base of one doorknob and clicks firmly over the other one, given that the…
The Pr!ngspenser ============== Many projects are driven solely by lots of coffee and potato chips. Pr!ngles are great and they come in a packaging that screams for upcycling and reuse. Coffee capsules on the other hand tend to stack up…
I use the popular combination of wlan extender tplink TL-WA830RE and powerbank XT-Power MP-10000 to extend the range of my perrot ar drone 2. This case attaches the powerbank to the extender and provides a mount for a tripodm so you can…
The original design works fine, but it had too much side wobble, on my head at least. But since I really like the simplicity of this design over some other more complex and heavier structures I found, I had a similar simple approach to…
Ther Lairvik Bed comes with a nice vinesque top part. As gorgeous as it is sometime you might get tired of it, especially since the bed itself is nearly undestructable and tend to stick around for quite some time. To make the design a…
To wszystkie aktualnie dostępne wyniki.
