Liczymy pasujące modele…
All parts were printed with PETG with a resolution of 0.28mm and with supports. In addition to the printed parts, you will need 4 screws identical to those in the photo plus 3 BX2091C terminals…
I made this model so I can use Railblaza Rod Holders as well as aftermarket rod holders and accessories. You only need to change the teeth part to fill your needs. Print with 4 parameters and 45% infill. I used PETG because the layers…
This is a setup for using Railblaza accessories. Print with 4 parameters and 45% infill. I used PETG because the layers bond better than PLA and it has some flexibility that PLA doesn't have. The gasket must be printed on flexible…
All parts were printed with PETG with a resolution of 0.28mm and with supports. In addition to the printed parts, you will need 4 screws identical to those in the photo plus 3 BX2091C terminals…
Update 2024: Since it is impossible for me to control the printers, filaments and slicer settings of those who print my models and having been told that my model is not sturdy enough to withstand drops (it was not designed for that…
This is a Router Insert Plate I made for my Dexter Router with a simple lift and lock mechanism. I printed the board in carbon PLA because I needed it to be quite rigid and not flex. I created two slots to insert two steel profiles 20mm…
I printed the stand and the clamp height in PETG and the cap in TPU. The clamp I used was this one: https://www.aliexpress.com/item/1005004273070234.html?spm=a2g0o.order_list.0.0.7055180233096a
I made this so I can use my Railblaza accessories. Print with 4 parameters and 45% infill. I used PETG because the layers bond better than PLA and it has some flexibility that PLA doesn't have. The gasket must be printed with a flexible…
I made this so I can use my Railblaza Starport design on the rail of my boat. I print this with 4 parameter and 45% infill . I used PETG because the layers bond better than PLA and it has some flexibility that PLA doesn't have. Supports…
I printed this part in PETG with a resolution of 0.2mm and supports just touching the buildplate. The piece must be printed lying down to have more resistance. I have attached some pictures of the slicer so you can see how it was printed.
I made this so I can use my Railblaza accessories. Print with 4 parameters and 45% infill. I used PETG because the layers bond better than PLA and it has some flexibility that PLA doesn't have. The clip must be printed with 100% infill on…
This is a cap to protect and beautify the shock absorber bolts of my Mercedes W203. I printed on PETG to withstand the heat coming from the engine. Print with 25% infill. No supports needed.
Print on PETG with 25% infill. No supports needed.
This a navigation light with the 3 colors (red, green and white) with a 112,5º arc for the green and red and 135º arc for the white light. I printed this on PETG and it has held up well. But you can print on ABS or ASA if you want. The…
Printed in PETG with 100% infill without supports. I also used two M3x6mm screws and two M3 Nut Inserts (OD4.2mm - Lenght 4mm) like these:…
I've been in the market for a rotary polisher, but the asking prices for a machine that just spins are absurd. So I bought a fake makita angle grinder and adapted it to a polisher. The handle was printed in PETG with a resolution of…
Exterior transom protection for outboard motor. It measures about 27cm in the widest part and about 19cm in the narrowest part. The height is 17.5cm. 1cm thickness. Category: Sport & Outdoors
This was done to have a very tight fit with my saw. So if you decide to print this remember that not all printers have the same tolerances nor all saws are made the same, so some sanding may be required. My saw have a clockwise rotation.…
This is a microSD to SD Card adapter for Alfawise U30. I made this because I do not like microSD cards and because I do not find it practical the card reader to be on the back of the printer. I used this card extension:…
This a remix of my own Navigation Lights for a Radar Refletor but this ones are for a 22mm stainless steel pipe. Print Settings Printer: CR-10S Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: RepRap PETG Black & Transparent…
My Yamaha Outboard F60 had the locking trim mechanism bush heavily worn so I made this ones. They fit perfectly. Category: Sport & Outdoors
Since I bought my boat I plan on installing navigation lights to navigate at night. But the price of the navigation lights and the structure of my boat I still had not found a solution that pleases me. As I already had a radar reflector…
To wszystkie aktualnie dostępne wyniki.
