Liczymy pasujące modele…
Ender 3 S1 pro compact screenmount angled 15 degrees. The ender s1 pro is a bit to big for my creality tent I bought for my ender 3 pro. The original mount from “walklife” didn't cut it for the tent and I had to change the design. The new…
Description: The Compact Berry Cleaner is a simple yet effective tool for washing blueberries, raspberries, strawberries and many other small fruits. Just place it under the tap and let the built-in funnel system circulate clean water…
Simpel camera mount for cameras with clip mounts. PETG/PLA
Nice and soft feet for your Creality ender 3 pro or Creality ender 3 s1 pro. This is version 3 of 5. This is the best of the feet I made. I used: TPU98A medium soft infill 10%. TPU 85A soft 20% infill. Nozzle 0.4mm Layer height 0,2mm Do…
A gargoyle from batman. Fits on af FLSUN v400. PLA silke green/blue 200 degrees print 0,4 nozzle 400mm/s
Filament: All - PETG, ABS, PLA
Nice and soft feet for your Creality ender 3 pro or Creality ender 3 s1 pro. This is version 3 of 5. This is the best of the feet I made. I used: TPU98A medium soft infill 10%. TPU 85A soft 20% infill. Nozzle 0.4mm Layer height 0,2mm Do…
This feeder for garden fish ponds is made to stop fish food floating around in the pond. Fish food ruin the environment in the water if not eaten. The tool makes it easy to find and remove food the fish has not eaten.
Updated backplate Filament - PLA/PCTG/PETG (any) Color - Dual color black/gold (any contrast color will do) Layer shift - shift color at layer 11 (if you do not have a multicolor printer)
Printed on a FLSUNV400 and a BambuLab X1C Printed in PETG need 4 3-4mm screws for fastening the roof Bird house with screw fittings need support Bird house with screw fittings need support Bird house with plain - no support needed Roof no…
Printed in PETG 0.2 mm layer height 4mm nozzle 100 mm/s temp. 240/60
Updated with nutch for better fitting and a stop wall for the roller to stay in place. Made from used creality rollers (see link) Creality Hjul - PriGo.dk V2, Normal ball bearing (see measurement photos) 19mm outside, 7mm inside 2x…
The one is made i tranparent PETG 245/70 degrees 100 mm/s vase mode printing time 1.30 hrs.
Bambulab upgrade - Poop chute D. 120mm x H.184mm x W.166mm Hole for magnet W.8.5mm x H.6.5mm x D.3mm .gcode file are for X1 cabon with AMS multicolor
Retro 3.5" Floppy Disk – Single & Multi-Color Edition This model is a tribute to the iconic 3.5" floppy disk — the original “Save” icon and a true symbol of early personal computing. Designed with clean proportions and recognizable…
This is a ceiling cover for covering the hole in the ceiling and hiding cables for a lamp. 9mm or 8*11mm hole for cable or cable suspension.
A golf ball mount attached to a golf cart, allowing easy access to golf balls while on the course. Printed on a FLSUN V400 0.4mm nozzle PETG preferable PCTG 255 degrees Celcius nozzle 60 degrees Celcius bed
The roof is "caving" in and this is your solution. After some time the roof on a creality tent is begining to touch the filament roll. This roof holder is holding the roof in place. Print two “roof holders” and place a stick in the…
King Frederik the X and Queen Mary of Denmark - Monogram Color white and gold .gcode is in color “Bound, obliged, for the Kingdom of Denmark”
This feeder for garden fish ponds is made to stop fish food floating around in the pond. Fish food ruin the environment in the water if not eaten. The tool makes it easy to find and remove food the fish has not eaten. Print: Printer -…
Three different antennas for the Tintin rocket
Printing settings: Material - PETG/ABS Nozzle - 0.4 mm Layer height - 0.2 mm Top, bottom wall, side walls - 3 mm Infill - 15% Print speed - 100 mm/s Print Settings Rafts: Yes Supports: No
Guide - Magnet Cisco Icons: Accessories: Magnets are 3x3mm (3mm height x 3mm diameter). There are two versions of switches and routers, and all are provided in sets of 3. Each print has three holes on the back. If using neodymium magnets,…
No support wall mount for a Beo4 remote Glue the two pieces together - Gel glue is best for PLA and PETG
Print in PLA, PETG or anything you like.
Printet in PETG but PLA is fine too
This is for everyone how allways believe it is the DNS-server..... and it isn't
I printed the mount in PLA - and it hold it secure and firm on the wall. I guess the mount can be printet in PCTG, PETG, ASA or simular These two mounts are printet on a BambuLab X1C and a FLSUN V400. 4mm print head, 225 degrees celcius,…
For short rests and more comfort. Version 2 is here…. and give more comfort for the head :) Print: Printer: Creality ender 3 S1 PRO Filament: TPU A85 (215 degrees celsius Infill: 10-20% Support: Yes Print speed: 50 mm/s
Print in any filanmet Magnets 3x3mm or 3x2mm (Diameter x hight) For color change - Change color at layer 23 (Code: m601)
Print in any filament - magnet size 3x3 or 2x3mm Color change Layer 28
Use colour switching - Dark blue/White top or simular. Any filament - PLA/PETG/ASA… any
Print in any filament (PLA/PETG/ASA… any) For multicolor - layer shift layer 18
Videoovervågning skilt til postkassen
To wszystkie aktualnie dostępne wyniki.
