Cisco Icons - ready for magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Guide for magnetic Cisco icons: Color changes, layer info, and PLA prints. G-code made for Prusa MK3S in ORCA Slicer.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 31
- Wydruki
- 1
- Wyświetlenia
- 190
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Share Alike
Guide - Magnet Cisco Icons:
Accessories: Magnets are 3x3mm (3mm height x 3mm diameter).
There are two versions of switches and routers, and all are provided in sets of 3. Each print has three holes on the back. If using neodymium magnets, it is only necessary to use two of the holes.
Printer code to pause the print for color changes is M600 or M601 (use M600 in the G-code file).
Instructions for each type:
Routers - With "handles" (R1, R2, R3):
- Color change at layer 13.
Switches - With "handles" (SW1, SW2, SW3):
- Color change at layer 13.
Routers - Without "handles" (R1, R2, R3):
- Color change at layer 12.
Switches - Without "handles" (SW1, SW2, SW3):
- Color change at layer 13.
Clouds/Sky - With "handles" (WAN - Cloud/Sky):
- Color change at layer 16.
Clouds/Sky - With "handles" (Internet - Cloud/Sky):
- Color change at layer 16.
Notes:
- The G-code files are made for a Prusa MK3S printer.
- Prints are made using PLA, but other materials can be used as well.
- Slice using ORCA Slicer.