Liczymy pasujące modele…
Enjoy this peaceful Zen Garden! It's been a great project creating this and I'm curious what you all think :) All pieces print support-free in the orientation you download them in. The plant component and rock moat were inspired by Jacob…
Print in the orientation as downloaded, no supports. I used Wood PLA from Novamaker and then stained it after, but any plastic works. I made this as a way to save a cigar label. I was going to print a whole box but haven't gotten around…
There are 4 pieces, print each in the orientation as downloaded, no supports. Each piece has a screw hole, so you don't need to glue them all together before hanging on the wall. But I suppose it wouldn't hurt.
There are 2 files, the spoon rest and the optional footpad that I recommend printing with TPU. Print both in the orientation downloaded in, no supports. I printed it in PETG so that I can stick it in the dishwasher if I want to.
Print as downloaded with the front face down. The size of the plate itself 140mm x 140mm. The size of the rectangle hole for each switch is about 33.5mm x 66.5mm. I used Protopasta Gold Dust PLA . Let me know what colors you use!
Print both the letter sorter and the optional TPU foot pads in the orientation downloaded in. The pads are technically different so you'll need 2 of each, but 4 of the same would still functionally work.
There are 4 total pieces, the full coffin is split into quadrants. Each piece should be printed in the orientation you download them in, no supports. Assemble them however you see fit, I superglued the top 2 together, then one of the…
The roses come from https://www.printables.com/model/250432-rose-with-cashbox or https://www.thingiverse.com/thing:3423963 but the vase can be used for anything not just those roses. Please post a make if you find this to be a nice vase! :)
I remodeled this mainly to add a larger gap between the locking mechanism and the main part of the case. I use a 0.6mm nozzle which seemed to be a bit too thick of a layer width for the original design. This one prints easily for anyone…
This has been a convenience for me and it matches my other kitchen sink accessory the Hand Soap Holder . Fits any standard sponge, there is drainage too but you can't see it from the pictures. I recommend printing in the orientation like…
I scaled the original woven planter file up to 120% (100mm tall) , but even if you don't this should still work. The cactus will just be larger in proportion and not sit as deep in the planter. The base piece can be printed in the…
Print support-free in the orientation as downloaded. I used wood filament and stained it, but any plastic will do. The pad is optional, but adds a nice flair of color. If you print the pad, I recommend super glue to adhere it.
There are 5 pieces total - Casing - this is the main white piece in my post, it should be printed standing up with the opening at the top, rather than laying flat on one of the sides. Labels - There are 2 labels and they are each unique…
There are two pieces, print them both in the orientation as downloaded. I used a little bit of support for the inside area of the outside box piece. If it was just a normal bridge area it wouldn't be necessary. But there is a bore for the…
Print in the orientation as downloaded, support-free. It just slips on top of a tissue box for an elegant decoration and to keep the box in place when pulling a tissue. It should fit any square tissue box that is within the dimensions of…
Print in the orientation as downloaded. I used tacky to stick the TIE onto the base. Works pretty well.
There are two parts, the wall mount bracket and the cubby for the AirPods. Print both in the orientation they're downloaded in, no supports required. The wall mount bracket can be adhered to the wall with double-sided tape, or you can use…
This rack is used to simply hang and exchange your apple watch bands. I recommend printing in the orientation as downloaded, no support needed. The connectors can be used to connect each rack segment, or you can glue them, or just adhere…
This base is meant to add some sturdiness to the can press as a safety measure. The original model works great, but I was afraid of gifting this to someone with the risk of them hurting an ankle if it topples over. The TPU ring on the…
Print both the lid and jar in the orientation downloaded in, no supports. Holds a good amount of toothpicks. The lid is not meant to fit tightly on the jar, it should be loose and easily removable.
Print the shelf bracket support-free in the orientation it's downloaded in. I used 2 brackets for each shelf, 1 on each end. But you could use more if you'd like. After the shelves are hung there will be a small gap, about 12mm, between…
Print the shelf in the orientation downloaded in, no supports. It screws into the wall with two screws, or you can use double-sided tape.
Enjoy this fun project of creating a convenient shower caddy! All parts print support-free in the orientation you download them in. --------------------------------------------------------------------------------- Material This can be…
I had made a few of the tea dispenser's by Val and they worked great, but I didn't have a good place to hang them so they just sat on top of my microwave. I also started drinking the True Orange packs, which are phenomenal but I needed a…
I loved the design of this Magic Magnet Tool by tjdesign , but with my 0.6mm nozzle I had trouble with the pin and threading. So I redesigned it to be a bit simpler. The tool is printed in 2 pieces, cap and shaft. Print support-free in…
No supports required, print in the orientation as downloaded. I used a screw in the middle of the holder to mount it to the wall, but mounting tape works too.
There are two pieces, the stick and the base. Print them each in the orientation as downloaded, no supports. I just superglued the stick into the base after. It holds 14 clips. The crocodile clip file I uploaded is the same as from…
This is a wall-mounted magnetic knife block that uses rectangular bar shaped magnets. The magnets get inserted into the hollow tunnels after printing is complete. Print two halves of the attached file, support free in the orientation as…
Print in the orientation as downloaded, no supports. There is a small indentation on the wall-facing side if you want to put tacky there, but the 2 screws at the top should be sufficient if not. The grinders are from Walmart ( link here…
This is a simple print without supports (print in orientation as downloaded) that you can screw into the underside of a desk or table. It should fit most tape measures out there, I use a Stanley tape measure and it fits great. I used…
I call it a Game Day Hub because we mainly use it for Sundays during NFL season when watching games all day and eating snacks, but it's essentially a remote control holder with a few added features. You can theme it however you want, but…
There is a top and bottom piece, print both of these with the flat side on the build plate. The heart pad can also be printed flat and glued on top for a two-toned box if desired. I used 2x 8mm diameter, 3mm thick standard neodymium…
Print in the orientation as downloaded, no supports. The fingers should hold any ring size and there is a tray in the middle for other jewelry or other miscellaneous items.
FYI - I printed the Yoda model at 200% scale. Print the stand in the orientation as downloaded, no supports. I used clear PETG with no infill. Let me know what you think!
Description I made this to avoid lifting my wet hands out of the sink in order to get soap. It clears up counter space, keeps the soap out of sight unless you're at the sink, and keeps the counter clean/dry. Should fit in a standard sink…
All pieces print support free, in the orientation you download them in. The base piece is the same regardless of what the flag is, so print one of those. There are two options for the border/frame. Either print 2 of the border_half files…
To wszystkie aktualnie dostępne wyniki.
