Liczymy pasujące modele…
Thanks to blueOcean for making this tool mount. I traced it in OnShape and removed the french cleats and added some screws. The charger fits perfectly. Don't mind the multiple colors, I ran out of filament in the middle of the print.…
I bashed my finger in a car door. I kept reharming it by using the finger. This thing goes over the end of the finger and reminds me not to use it, and also adds a little protection if I do. The ID is 17.7mm, and the inside length is…
Not terribly decorative, but it does the trick of holding a stocking over the mantle without damaging the wood. It's not critical that it "pinches" the wood, it really works just by making sure the loop of the stocking is held underneath…
Skates can be sharpened to different radii based on the skater's ability, weight, ice type, etc. This is called the “hollow”. I wanted to be able to measure the hollow on my skates because: I don't get them sharpened enough, and I forget…
I needed an adapter to clean my fish tank (I have one of those python attachments). But we just got a new moen bathroom faucet and it didn't fit. The threads on the moen seemed to be about 21mm wide and 1.5mm pitch. The hose part is about…
This remix has a good fit for my bits, has room for 48 (If you need more, print two, it will still be less plastic than a bigger one). It should be printed on it's “back” to make the screw holes stronger. It can be mounted using #6…
Thumbstick for the sparkfun 5 way tactile SMD switch: https://www.sparkfun.com/products/10063 It's very small... I made my PCB with the wrong orientation (It's supposed to be at 45 degrees from square), so I also made the…
Vase Mode These are solid models. They are designed to use vase mode. Enable vase mode in your slicer (in prusa slicer, it is print settings → layers and perimeters → spiral vase, then ok). This will make them print a single bottom layer,…
Update: This is still very sturdy and works great. 3 years later. This stand is to help my 2 year old climb up to wash his hands, help cook, or snack at the counter while watching me cook. We actually have it in the bathroom now, for him…
Wrist rest for my Iris mechanical keyboard from keeb.io. This is the PCB case, and these fit right up next to it. They raise your wrists a little, but don't provide any tenting. They are also not terribly heavy, but mine stay put. This…
I knocked my little collection of component boxes over once. That was a pain. Besides, I want them off of my desk. These are new boxes, with a thickened rear wall, and a slot cut in them. The slot allows for a small woodscrew to hold…
OLKB Terminal The most up to date info, models, and info will be kept in github here: https://github.com/jeffeb3/olkb-terminal The keyboard is the https://github.com/victorlucachi/void30 . Not part of these STLs. (v61 on the files I have,…
I didn't like that the Pandemic box has the Character cards and the action cards just floating around, so I printed these to organize those as well. It fits like a glove, and I'm pretty happy. There is plenty of space in the middle for…
Holding the belts with zip ties is giving me trouble. The zip ties seem to loosen up just enough to let the belt go one notch each time there is trouble. This piece of plastic goes between the belts, underneath the zip ties, and make the…
Sharing this last minute. Hopefully someone enjoys it. We printed these details after the fact. The prusa 2.3 ironing feature really helped smooth out the surface in preparation for paint.
Remixed from: https://www.thingiverse.com/thing:221378 dadhoc made these, and I found them, over two years ago! Well, I finally decided that these just had to be made in a microSD size. I took measurements from his STL, and recreated a…
I love the idea of the Wall Mounted Plug Storage by jgelwix. I just wanted it a bit more flexible and less bulky. I went back to the NEMA 15-5 standard, instead of tracing their model, so this is only sort of a remix. Either way, please…
I bought this inexpensive scope for inspecting and soldering surface mount electronics. https://www.amazon.com/dp/B00XNYXQHE This mount lets me keep it on the wall and holds it above my PCB to do magnified soldering, or just inspect the…
Inspired by the EMT Conduit Case by Steep, and remixing parts from Allted's Conduit clamps and his End Stop Mounts, I created a place to bolt on my raspberry pi, and a 7in touchscreen monitor. I am still working on my software, but the…
I like the pivot mount from here (by danekshea) and I wanted it for my Full Graphics Smart Controller: https://pinshape.com/items/24766-3d-printed-pivot-lcd-case-for-smart-controller-lcd-screen I remixed in the Case by vadda and I added…
Prints in two parts. They are joined by 2 M2 8mm socket cap screws. The holes printed tight on my printer, so I just threaded them into the plastic. If they are loose, you might need longer screws and some nuts. The ears are critical to…
I added a little handle to the middle of @Fabmaszter's insert. I thought it would also be good to keep the little cards in separate piles. After printing it, I'm not sure it's any better. I also incorporated the 12mm overall size,…
metalnow made a great attachment for the 9xR transmitter mount. I needed it to fit my slightly differently shaped SkyZone SKY-700D. The screw holes on the back don't do anything, but the screw hole on the bottom holds a 1/4" bolt and it's…
This mounts a clone bmg dual extruder and a E3D v6 hot end, along with a BL touch. This fits on the GridBot v2 , but there may be other printers using these linear rails. Parts you need: Dual gear extruder (not a bondtech, but the clone…
Hi, these are the parts I used to make this printer my own. Some non-standard things I've added: E3D v6 extruder. Cuts down on total Z travel, but I wanted the 3:1 reduction and didn't want to spend the money on the titan aero. BLTouch. I…
I've had these speakers for maybe 15 years, so don't blame me if it doesn't fit yours. Sorry. The cables can be routed through the hole in the base. The chromecast is mounted below with [this great…
Each person's tray can lift out and they have their own little bank of ore and gems. The cards and dice can be lifted out after that. The word “lucky” is written on one of the dice slots. We are convinced one of our dice is much better…
I converted my LR1 to a Low Rider v3 and I had this overhang area under the table. So I built this box to fit some connectors, an amp/volt meter, 5V power supply, and a 24V switch with an LED. It screws into my table, and gives me plenty…
I use a pegboard (1 inch on center, ¼" holes) to hold my hockey gear in the garage while it airs out. The hooks and the peg board are regular ones you would find at home depot or any other north american hardware store. It would probably…
I was tired of trying to decide what to do with these spare small allen wrenches. So I printed a small box and mounted them to my wall. Sorry for the wonky picture. It really is not straight IRL either. I will have to fix that.
My kid needs some more time on a bike without pedals. I didn't want the crank threads to get dirty. So I made these caps to fit in the cranks and keep the dust out until we are ready to reinstall the pedals. The left has a left handed…
To wszystkie aktualnie dostępne wyniki.
