3x5 microSD Card Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
dadhoc made these, and I found them, over two years ago!
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 420
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Remixed from: https://www.thingiverse.com/thing:221378
dadhoc made these, and I found them, over two years ago! Well, I finally decided that these just had to be made in a microSD size. I took measurements from his STL, and recreated a space for a microSD instead of the big size.
I recommend printing some of the larger ones too, so you have some storage for the adapters.
I managed to print these as oriented, with a 5mm rim and a 0.4mm nozzle at 0.2mm height. The overhand on the window always sucks, but it can be trimmed with a knife, and it's not too bad to begin with.
Print instructions
Category: Organization