Liczymy pasujące modele…
Bonsai pot 24 rectangular ornaments 213x143x50mm, no support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is…
HalfManBear's shroud design but with multiple optimizations delivered in one package Thanks to Layer.Shifted for pointing out the airflow problems! Special thanks to @mcbabo for making the assembly illustration! 🤩 Do you like the design?…
If you like what i do, please consider throwing a few breadcrumbs my way :) https://ko-fi.com/duckers
A simple remodel, I did not take my time, but I spaced it out a bit to support 5 3.5" drives instead of 4 like the original model. I have computers that use the IcyDock FatCage, which supports 5 3.5" drives. I found this model when…
These are the latest version (v 2.2) of my lidded Gridfiniy bins, with several improvements over the 1st version. These include the following improvements and new elements: Fully redesigned bins with a more efficient use of material…
Redesign of a Wago mount (from Voron) with embossed labels for my RatRig V-Core-3. It has two countersunk holes 55mm apart for fixing it to Voron's really cool printable DIN clips. I have included the STEP and F3D files so you can modify…
Since I needed a liftarm with holes instead of crosses and in regular as well as half thickness, I constructed a 3x5 and 3x5x0.5 liftarm similar to the Lego - parts 99773, 65193, 2905. Print the liftarms in STL orientation with support on…
You are going to need to go slow and keep the breeze off the print or it will warp
Gridfinity holder and organizer for Kobalt 3/8" drive metric sockets. Slots for 19-9mm, both regular and deep sockets as well as extension. Organizer fits in a 3x5 gridfinity footprint and is 3U tall. Lettering is embossed 1mm onto the…
This is a bobbin holder inspired by @Tdub5PrintNPl_470602 stackable bobbin holder (https://www.printables.com/model/367842-stackable-bobbin-holder) but built from scratch for gridfinity. It takes up 3x5x4 and fits 60 bobbins
2x3x5 Gridfinity container for X1C and P1S nozzles. By default it contains a section for each nozzle (0.2, 0.4, 0.6, 0.8) and a slot for a suitible hex key (the one included with the printer does not fit without making it 2x4) There are…
This shelf mounts on top of the Ikea Skadis board and adds 209,5x12mm of storage space without loosing the use of the upper holes. This very strong shelf extends the use of your skadis board to a new level. Combine Ikea Skadis with the…
3x5x5 Gridfinity insert that holds twenty eight 10ml vials, or anything else cylindrical that is smaller than 25mm This is used in a 3x5x9 Gridfinity box to hold 28 10mml vials. It has holes for magnets on the bottom. You can use it in a…
I Remixed this recipe box and added a little better tolerances for lid. holds 3X5 recipe cards, built in hinge so no screws or wires required. Print in PLA or PETG 3 Wall Layers 3 Top and Bottom Layers 15% infill
Printed with supports, 15% or so infill, 0.2mm height, in PLA
Designed to maximize the amount of bottles in the space and save time and material. Rows are tiered for visibility.
Whether you are learning vocabulary, formulae or other kinds of information these travel-size cases let you bring along your most important index cards. Depending on the card stock you can fit around 100 to 180 cards inside each case.…
More details here: https://github.com/oleksandr/cyberpunk_dactyl_skeleton This is a full rebuild of original Skeletom Edition ( https://github.com/atsuyuki/dactyl-manuform-skeleton-edition-4x5 ) modelled in Fusion 360 that includes the…
I didnt find a good model of these inserts that I can use for reference when modeling, so I made my own. Since I am a VFX artist, I also included a .blend file with procedual shaders, in case you need it for photorealistic renderings.…
A Gridfinity holder for the Dymo LabelManager 160 . Takes up a 3x5 grid
I wanted to have a compact box to organize my uSD cards. They needed to be easily accessible and organizable and I wanted the box to be held tightly shut by hidden magnets embedded into the design. The hinges I also wanted to be printed…
It's just a Gridfinity holder for a cheap (but great) plastic razor scraper. Angled scrapper recess to hide blade and expose handle, storage for as many blades as possible, and a lip to allow stacking when not in use.
Print 12 dividers if you want to cover yours bases. Any unused dividers can be stored in the box in the center. Fits up to 14 slim cartridges or 10 medium or 8 wide ones. Or any combination of cartridges.
A 3x5 Gridfinity bin for your Fluke 117 and 113! Theres a V1 on Thangs but V2 has a much better Fit This was designed specifically for the 117, but can also fit the 113
If you find you use notecards a lot, then give this notecard/index-card holder a try. I designed it hold standard 3x5 (7.6cm x 12.7cm) cards (about 50 cards) and holds a pen or mechanical pencil. I usually use this as my daily notetaking…
2025.06.10 Update: I re-modeled this as I've learned quite a bit since I first made this. There is now a version without cutouts, because some IKEA KUGGIS boxes don't have them for some reason. --- I needed a Gridfinity insert for the…
Simple and easy design to hang up to 15 belts in a 3x5 arrangement in your shelf or cloth hanger - select the model according your needs!
I still use some 4U rackmount ATX cases that are a bit over 20 years old. Due to their age, they only have 2 80mm fan mounts so the airflow is insufficient for most modern processors. The good news is that they have 3 5.25" drive bays.…
This is a compact but sturdy case for the Pinecil soldering iron from PINE64 . This model uses 3x5mm neodymium magnets for the closure. This is a simple remix of ssombra 's pinecil case (which is itself a remix of Olvin 's TS100 case)…
Needed to 8 x 2.5" ssd to a lab server There is a small tolerance so you might need to push in the disk a litle bit. There is room for a 120mm fan enjoy
I've been trying to organize my desk and previously made a pen cup that hangs off the back of my monitor, you can see two of them in the picture. It is available here: https://www.thingiverse.com/thing:4194714 I use a 3x5 card each day to…
Use original printing instructions 14-03-2024: fixed hole spacing, was 23mm, changed to correct 23.5mm
A simple organizer for insulin to be stored in your refrigerator. Created in FreeCAD
Hex Bin Gridfinity 2x3x5 Divided x2
Kann ohne Unterstützung gedruckt werden. // Can be printed without support. Verwende mindestens PETG um es im Geschirrspüler zu reinigen. // Use at least PETG to clean it in the dishwasher.
Show off and store your index cards
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
Box for the Ifixit Pro Tech Toolkit, low edged and non-stackable.
This is a box to hold 3x5 index cards. It has enough height to hold dividers. I have "Psalm 119:11" set into the bottom which is “I have hidden your word in my heart that I might not sin against you”. There is enough height for dividers…
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
A trimmed down version IKEA Kuggis Gridfinity 3x5.
This Hex Tray w/Divider offers thicker walls for a more rugged tray. 2x4 Gridfinity base plate. Flat bottom of this size/style is also coming soon.
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
This is just one box of a bigger system with more than 160 variants in size and partition. Find the whole overview here. compatible with Sortimo/Bosch/Auer/Allit EuroPlus Insert 63/others in size many variants available, see the link…
adapted the size to fit a 43x50mm powerstrip
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
This is a Gridfinity-compliant and stackable nozzle case holder. It holds four Prusa Mk4 nozzle holders as they come from Prusa. In this 3mf file, I have put the text next to each nozzle slot for the size and material of the nozzles, but…
Extra space for holding solder, wick etc. I have changed the design a bit from the one in the picture. added a notch for easier removal of the soldering iron, made the tips holder a bit tighter as some of mine were lose. Also removed the…
EBB36/NH36 mount with strain relief
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
60mm fan mount for Voron Switchwire with M3x5x4 Heatset inserts
This is a remix to fit SF 3x5015 Neptune 4 fan mod shroud. Should be printed with PETG, ABS, ASA for durability and heat resistance.
Welcome, and thank you for choosing my model. I will provide some context for this model. This practical 3D-printed flashcard holder is ideal for neatly organizing your study cards and presenting them in a clear overview. The design is…
Simple, vertical box for 3x5 notecards or recipe cards. Extended lid for using tabs on the notecards.
Keeps stuff organized in your pocket.
Updated to use the Vorn spec 3/5/4 heatserts. 2.9mm plastic below to allow nyloc like anti vibration movement. Does have the 3d printed stepping for screw overhang as well. Added second model with holes to push the magnets, should you…
Works best if you print the inside and outside seperately. Requires no support. 0.22 layer height is reccomended on a 0.4mm nozzle. PLA Pro works best. Orient the inside on the large base, Orient the outside on the end so the open end is…
This is just one box of a bigger system with more than 160 variants in size and partition. Find the whole overview here. compatible with Sortimo/Bosch/Auer/Allit EuroPlus Insert 63/others in size many variants available, see the link…
3x5 index card tray - slots allow for some to stand up vertically.
Super simple storage for your Revell AC colors. Tight fit but easy to take out.
Small parametric bracket for holding an endoscope camera The base model was made for a cheap aliexpress one with a diameter of 7.2mm, but you can change that slightly in the model with a maxium of 8mm same goes for the offset from the fan…
merging together a bunch of print heads to get all the features I wanted here is a list of what I want from this print head kubsa mount 3x 5015 fans beacon mount threaded inserts Update Aug 7, FINALLY actually printed this. I used: 6x m3…
Default model (stock probe) -- the probe position remains the same as in stock ; no offset correction is required. BOM : Default model (stock probe): heatbreak fan: 1xM2 16mm bolt + printed heatbreak fan-16mm-bolt-mount model fans: 2xM3…
A thing to hold the Starrett Drive Pin Punch Set, Standard Length (S565PC). Bin size is 3x5x3.
You can also check this model for Volcano hotend (3x5015): https://www.printables.com/model/1294309-neptune-4-35015-printhead-volkano
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
9 piece SAE Snapon Wrench holder for 7/8, 13/16, 3/4, 11/16, 5/8, 9/16, 1/2, 7/16, 3/8 10 piece Metric Husky Wrench Holder for 19, 17, 16, 15, 14, 13, 12, 11, 10, 8 Both or at least one will fit a large variety of sizes with the taper.…
My remix of OrzOrzOrz V6 prototype. Since my LEDs on the extruder died, I made some modifications so I could use an LED strip.
A seedling tray designed to be used with the Jiffy-style peat pellets. Suitable for 15 pallets with a lid to keep it warm inside to speed up germination. Printed with Prusament PETG Urban Grey and Prusament PETG Clear.
GRIDFINITY MITUTOYO MICROMETER TRAY 25-50MM PT 293-612 3x5 INC CAD MODEL
A hot glue gun holder that fits into gridfinity. Used this website to make the base, then simply modeled in some extra walls.
Remixed from: https://www.thingiverse.com/thing:221378 dadhoc made these, and I found them, over two years ago! Well, I finally decided that these just had to be made in a microSD size. I took measurements from his STL, and recreated a…
I'm sure you could design something better, but anyway it works. Bottom Bowden fitting may not be necessary.
Customized version of https://www.thingiverse.com/thing:2634818 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2634818 Instructions Using the following options: numX = 3 numY = 5 bottom_thickness = 1…
I needed something a little bigger than 1-2-3 blocks and with wider holes. If you use this file, please share what you end up using it for, if it's for work holding, clamping or whatever! :)
Standalone palette for 15 headspace vials (20 mm diameter) with a hole at the bottom for washing or spill release.
This is a card case, for which similar designs exist, that is intended to hold 3x5 flash cards. I made this when the bugs and drugs section of med school got a little out of hand and I decided regular flash cards would be better than…
voron 0.2 MiniSB_Motor_Plate with M3 Brass heatstake inserts - short M3x5x4
3x1 through 3x6 base grids. The most important thing is to make sure your magnets have the same orientation throughout the whole system. More about the FreeGrid system and FreeCAD tools to build your own modules is available on our…
What is this I have used Chris_Hill s modified tension pulley for months now, there is nothing wrong with them but spotted a tiny potential for improvement. With a few small changes it could print better in another print orientation that…
Index Card Holder fits American standard 3in by 5in index cards.
Holds a 3x5" notepad and pen comfortably. I used 4 multipoints so it doesn't wiggle around.
Need to store your Hoto Handheld Car Vacuum Cleaner Cordless you got on prime day to remove the microplastics out of your printer? A gridfinity bin beats the pants off of a cheesy nylon bag.
I use a 3x5 size stacking plate for gridinfity redefined and i created these pocket hole bin holder to replace the bin I had been refilling. it can be screwed to a stacking plate or kept separate. the label shelf is for ½" tall label for…
Typeractive Corne 3x5: Big Battery Edition This is a custom case for the Typeractive Corne 3x5, designed to address my biggest compliant about the corne: the tiny battery everyone uses. This case features a cutout for a 3.7v 750mAh 403450…
Credits: All credit goes to SilencedFrost , who has provided incredible add-ons for Neptune 4 printers. I just took this incredibel work and adapted it to my preferences. This custom mount integrates the optical filament runout sensor by…
Simple 3x5 Index Card Holder This design holds a stack of ~100 index cards (packs of 100 made by Oxford works perfectly) and there's a slot to display a card at an angle. finger access slots are added on all 3 sides of the stack holder so…
This is a custom Gridfinity module designed to hold the iFixit Pro Tech Toolkit in its original case! Built at a 3x5 footprint and twice the height of a standard Gridfinity module (10 units tall), this design provides a perfect snug fit…
Haunted Hairstorm – 15 Tile Wall Art (HugeForge) A haunting black-and-white fantasy artwork generated with HugeForge and split into 15 interlocking tiles (3×5 layout) for large-format printing. The artwork features a mysterious woman…
Wireless CRKBD skirt for a 3x5 wireless version. V1 was too wide, shrunk the width and height by 2mm so it's snug. Width was 1mm too short and snug. Expanded across to fit
To put on your Dishwasher to show when the dishes are clean or dirty in it. Red is for Clean and Green is for Dirty I use the Traffic Light idea for the colors I used. Print instructions Red is for Clean and Green is for Dirty 5% in fill…
A 3x5 Gridfiniy block to hold the original Bose Soundlink Mini. There is a space for the speaker, the charging base, the charging adapter, and the included charging cable. This was printed using Polymaker Panchroma Matte PLA Filament in…
I started with the filled_block_2x1x3x5.stl from the OpenSCAD and modified it to fit the accessories that came with my rechargeable air duster. My specific one is from Zarimi on Amazon.
I made this stencil/template for a task at my work. I work a shop that makes stone countertops and I'm in charge of finishing the templates and sending the files and stickers out to the shop. I needed a way to easily divide a 3x5 adhesive…
A 3x5 macropad on a Pro Micro board with the QMK system. The board is attached with hot glue. The keys are connected via a 1N 4148 diode. A microswitch is located on the board for easy software modification. The housing is assembled with…
Designed for Notsu rounded cards, but has wiggle room that should allow for any 3x5 notecards Has an 80 degree angled slot that holds active cards at a nice readable angle Front finger slot designed to make it easy to grab cards at any…
