Liczymy pasujące modele…
The "Slimterface" is a DIY facial interface for the Bigscreen Beyond VR headset, created by Sporky on the Bigscreen Beyond discord, later modified by Val to be more universal and give more FOV here is why you would want to make your own:…
quick support-less print to replace your Bigscreen Beyond's cable clip in case you broke it UPDATE 1: -original renamed to V1 -added V2, different clipping style to minimize wear on the cable UPdate 2: -added V2 vertical for better…
this is a low profile mount to affix a Vive tracker 3.0 to your Pico 4. to be used in conjunction with bdunderscore 's OpenVR-SpaceCalibrator that implement “continuous calibration” which make ues of a tracker mounted to the HMD to…
Bigscreeen Beyond Quest 2 strap adapter! what else to say? recommended print settings: -0.2mm layer height -0.4mm line width -3 perimeters -3 top/bottom layers -25~50% infill -"Outer before inner wall" is highly recommended for the best fit
/!\ THIS IS A PROTOTYPE, it may not fit your hands, feedback appreciated /!\ the shape, number of parts, part names and functionality might change with future improvements. Recomended print settings : TPU only! shore 95A recomended 0.2mm…
self explanatory I think! update 1: -renamed things appropriately -added variant with a 8mm round clip for bigger adapters
Pico 4 knuckle strap made from MAMUT grip3 Recomended print settings : PLA PET-G or ABS (NOT TPU!!=) 0.2mm layer height 0.4 line width 2 perimeters 3layer top/bottom 50% infill Assembly:
2 simple models to remix to your liking to make your own Bigscreen Beyond headstrap! recommended print settings: -0.2mm layer height -0.4mm line width -3 perimeters -3 top/bottom layers -25~50% infill -"Outer before inner wall" is highly…
Tundra Labs used to sell strap base plates, but it's been out of stock for forever with no restock in sight, so i took it upon myself to make my own strap base plates! PLA PET-G or ABS 0.2 to 0.25mm layer height 0.4 to 0.5mm line width 2…
print settings: PLA or PET-G 0.4mm line width 0.2 layer height 50%infill 2 top/bottom layer 2 perimeter no support the hinge just snap in place, engage the left side first and slide the right side from under up until it click in place,…
This part fit on the top strap of your Pico 4 and help alleviate potential pressure points on your scalp to be printed out of TPU, quick and easy to install and adjust, 15cm long, 5 cm wide and 8mm thick at most Recomended print settings…
simple tundra tracker cloths clip, so small and light you'll forget you're wearing your trackers! print upright with a brim preferably and minimum support, or even no support if you trust your printer. you can hot-glue a piece of craft…
uhm… that VR headset is a better microphone than my old T-bone so uh… here's a mic stand adapter for it easy print, here's my settings: 0.4mm nozzle 0.5mm line width 0.25mm layer height 2 perimeters (1mm wall thickness) 2 top & bottom…
this is a very simple blank slate base plate for tundra trackers, can accommodate the tundra expansion board and the tundra dev board feel free to modify for your needs, add holes for wires, add your own mounting solution, or whatever you…
Simple monolithic non adjustable mounts for Valve's Lighthouse 2.0 Base stations, (not for LH1.0, not tested with HTC Vive LH2.0) ideal for permanently mounting you Base stations, can be used as Wall or ceiling mounts, same hole pattern…
i don't even know how that would work, but i saw someone do it wrong so i had to do it right xD
made to go with this USB-C DAC or similar can't be bothered to right instructions at the moment, most of it you can figure out from the picture anyway, but here's some details about this setup: -The red part you see where the usb-c…
this is a qick mod to mount a pair of Sennheiser HD300 over-ear headphones to your Pico4. I'll start by saying that this is obviously a compromise, by maximising audio quality, sound isolation and comfort with over-ear headphones, the…
To wszystkie aktualnie dostępne wyniki.
