Liczymy pasujące modele…
If you have the Matcha expansion, you might be interested in my insert that adds support for Matcha . UPDATE 12/23/2023 Based on feedback I've received and my own continued use of these models, I have updated two of the boxes.…
UPDATE 2025-05-10 I have added a “finger cutout” to one end of the original oasis_box.stl for those who would prefer to give up a little bit of storage space in exchange to make it easier to remove this part from the game box. Print…
This is an insert designed to hold everything you need to play The White Castle with the Matcha Expansion . It supports premium sleeves (up to 46.2mm x 71.2mm), and has a few design elements intended to make setup slightly easier. It…
This is an insert designed to fit the game Dune Imperium Uprising plus the expansions Rise of Ix , Immortality , and Bloodlines . This is an updated version of my original insert which supported only the two earlier expansions…
UPDATE 11/6/2024 - Added island board overlays These are overlays designed to fit the player boards and three island boards (Emerald, Gold, and Pearl) for the game Pirates of Maracaibo . These are designed to fit snugly over the boards to…
UPDATE 2025-01-23 I have updated this insert to add support for the Bloodlines expansion. You can find that here. Original posting: This is an insert designed to fit the game Dune Imperium Uprising plus the expansions Rise of Ix and…
This is an insert designed to fit the retail version of Earth from Inside-Up Games. It supports premium card sleeves—I use Arcane Tinmen AT-10423. I have also added some card tableau grids (printed in two pieces per player), all of which…
UPDATE 2025-01-27 As requested, I have added variants of these boards that have raised (rather than embedded/flush) icons and numbers for those who don't have MMU capability and do not mind the extra height these add to the boards. These…
2025-04-10 Update - Version 1.2 In response to several folks whose games have much thicker tokens than my game has, I have redesigned some parts of this insert to better accommodate these "thick tokens," as well as made some minor…
This is an insert designed to fit the retail edition of the game Pirates of Maracaibo and supports premium sleeves. It also supports the player board and island overlays I have designed and posted here . The boxes with lids print best at…
NOTE: You will need a printer that can print at least 221mm in the X or Y direction to successfully make this insert. 2025-04-24 Update Another minor tweak, this time to player_box_x4.3mf / .stl , to make the pawn and meeple slots…
I found that saving the game was an ugly affair with plastic bags that wouldn't fit in the “crew status” piece from EddieCoast's excellent “Sleeving Gods” insert . So I designed—from scratch, but heavily inspired by EdditCoast's model—a…
UPDATE 2025-01-31 I have update "events_box.stl" and "river_tiles_box.stl" to add a bit of additional space for the tiles as some folks had issues with them fitting too tightly. At the same time, I have added "points_box_v1.1.stl" and…
2025-04-20 Update In response to a couple of makers who discovered their meeples were just slightly larger than mine, I have increased the width of the meeple slots in the Enologists, Farmers, and Tourists boxes. These same people also…
UPDATE Feb 10, 2025 I have added an overlay for the cracked insight dial. Both insight dials (normal and cracked) plus their corresponding overlays still fit in my remix of js500's player trays. (Barely!) I printed these using BambuLab…
WARNING! Please, do NOT print this with PLA, PETG, or even ABS! Use at your own risk. I am not responsible for any damage, direct or indirect, due to your use or misuse of this model. You MUST print this model with a material that has a…
This is a slight update on the coffee cups model by yves wouters. It primarily adds a tapered base so the model can be printed w/o supports, but it also is scaled so it should be ready for printing w/o needing to scale it in your slicer.…
This is a simple, interlocking card grid designed to neatly organize the "shipyard" and "colony" cards for the game Space Base. Unlike nearly all of my other game models, this one does NOT support sleeved cards. These can be used by…
This is an insert designed for the game Rivals for Catan (non-deluxe version). Highlights include: - Quick setup with card trays that can go straight from box to table. - Keeps card supply organized on the table. - No lid lift. The tray…
This is a remix of Nevzat778's nifty player box for The Search for Planet X . I adapted the model to have a lid to help keep everything in place better, and I made the area for the pencil wider so it can accommodate a dry-erase marker. (I…
NOTE: You will need a printer that can print at least 248mm x 216mm in the X/Y directions to successfully make this insert. Version 1.1 (2025-09-26) Based on feedback, I have redesigned the insert to move the game board from the bottom of…
This is an insert for the game Fort and it's Cats & Dogs expansion. It supports premium (at least 80 micron) sleeves and has been designed to help speed initial game setup. Highlights include: Two boxes (with lids) for toys/pizzas, on for…
UPDATE 12/12/2023 I have published a "Version 3" of this insert which holds the assembled bridges and meeple boxes with grid lids to place on the player boards. As with "Version 2", there is a very slight "lid lift." Version 3 is…
This is an insert designed to fit the game Paris: La Cité de la Lumière . Highlights include: - Quick setup with buildings stored in a single tray that can go straight from box to table. - Organizes player pieces in separate boxes which…
This is a remix of the player box from js500's brilliant Unconscious Mind insert to fit my insights boards overlays and client/dream card organizers . (Be sure to print the “_thin” variants of my models to be compatible with this remix.)
UPDATE 12/12/2023 I have published a "Version 3" of this insert which holds the assembled bridges and meeple boxes with grid lids to place on the player boards. As with "Version 2", there is a very slight "lid lift." Version 3 is…
This is an insert designed to fit the "big box" Kickstarter version of Ares Expedition plus all three expansions (Crisis, Discovery, and Foundations) from Fryx Games. It supports the custom TMAE card sleeves offered during the Kickstarter…
This is a simple heart-shaped box that holds the primary game tokens (paint, lamp, wall hanging, and curio) for the game Décorum . This fits the version of the game that has a vaccuum molded insert with two heart-shaped storage areas.…
This is an insert designed to fit the game Unconscious Mind plus all the add-ons provided by in the Kickstarter "Id" pledge, including the Nightmares expansion, playmats, and premium sleeves. It should have little to no lid lift even with…
My copy of Kanban EV came with one extra copy of each wooden part, including the cars. I store these in the “player-aids-and-misc-storage” part, but two of the cars (blue and silver) are too tall to fit in the bowl under the player aids.…
This is an insert for the board game Fantastic Factories plus its Manufactions & Subterfuge expansions. It supports premium-sleeved cards. The boxes with lids print best at 0.16 layer height (0.4 nozzle) but 0.20 or thicker is fine for…
This is a very basic tray to organize and hold the extra city, greenery, and ocean tiles (cardboard or 3D) used for playing with the Amazonis Planitia fan-made map. It is designed to fit in the large opening in the added "Big Box" tray…
This is an insert designed to fit the Kickstarter* version of The Lost Code from Mojito Studios. It includes storage for my replacement log stone token holder model (…
This is a box insert for the game Psychic Pizza Deliverers go to the Ghost Town . It's a one-piece insert because you have to remove everything from the box to play the game. (The box is part of the game.) Also, the insert does not…
This is an insert for the Allplay game A Message from the Stars plus its Kickstarter updgrades. It consists of just three pieces: a box for pens and the non-upgraded die, a "Scientists" box which holds all the cards used by the scientists…
This is a storage tray to use with js500's excellent Unconscious Mind insert to hold the two "Locations Rails" without a playmat. If you don't have (or, like me, ever use) the Meeting Table playmat, you might find this helpful.…
To wszystkie aktualnie dostępne wyniki.
