Liczymy pasujące modele…
This bed level test measures 185mm x 185mm x 0.4mm thick. Check and adjust you bed level before printing actual parts. Using this to set your bed will ensure maximum adhesion. The thickness is 0.4mm, which will translate to 2 layers at…
EDC pocket clip for you keys. Attach it to your keychain, use it as a money clip, or even use it as a chip bag clip. Material: PETG, PLA, Nylon, ABS Infill: 100% recommended, but not required Layer Height: 0.2mm
Let this simple, yet elegant business card holder keep your cards at the ready for your beloved customers.
Test just a small section of the bed, or set these in various places on the bed. These are used for calibrating the z height setting. I use a piece of paper to get close, then print one of these to get final calibration done.
EDC pocket clip for you keys. Attach it to your keychain, use it as a money clip, or even use it as a chip bag clip. Material: PETG, PLA, Nylon, ABS, other Infill: 100% recommended, but not required Layer Height: 0.2mm
Lost the lid from your beloved Yeti tumbler? Here's a printable replacement. The pocket is designed for a 3/8 x 1/8 magnet or a 10mm x 3mm magnet. The magnet will have to be glued in place, unless you modify the size to fit just right…
Some filament manufacturers have opted for cardboard spools, which are great in terms of reduction in plastic waste. One of the issues with cardboard is that it has a high level of friction on the sliding spool holder rods that are found…
Basic business card holder to keep your cards at the ready. Download the fusion 360 or step file and add your details as needed.
Missing the drawer pull for your Kennedy toolbox? Print some of these and replace your missing drawer pulls. Use an M3 screw with a nut to attach them. Material: PLA Layer height: 0.2mm
Protect your business cards in this flip open case. Fill it with cards and carry it with you. Flip the top to reveal your cards. Added V2: modified clearances and removed features.
Print this maracca and make some noise! The handle and bulb are printed separately so that the inside can be filled with a noise making medium. Print, Fill, Glue, Enjoy! No supports needed. Orient the opening of the bulb down and place…
This part goes on the inlet side where the hose connects to the power washer. Not many people will have a use for it, but hopefully someone will find it useful someday. material: PETG layer height: 1.6mm supports: none
To wszystkie aktualnie dostępne wyniki.
