Liczymy pasujące modele…
Designed for TFK Joggster Adventure. The holder prevents the cup from tilting in all directions and also uses printed “springs” to compensate for movements in the vertical direction. Dimensions Inner diameter of the holder is 75 mm. The…
Dimensions: 20 mm (height) x 16 mm (width) x 2 mm (thickness) At the top is a hole for hanging any hook of your choice. Print instructions Recommended to print with PLA; layer height 0.1 mm. You have to change the filament in the correct…
Dimensions: 20 mm (height) x 19 mm (width) x 2 mm (thickness) At the top is a hole for hanging any hook of your choice. Print instructions Recommended to print with PLA; layer height 0.1 or 0.15 mm. You have to change the filament in the…
Update 2024-01: I finally realized why some users were complaining about the bad dimensions. It was meant for folding with the grooves out and the smooth side in. If you do it the other way around, it bends less and doesn't fit into the…
Dimensions: 20 mm (height) x 16 mm (width) x 2 mm (thickness) At the top is a hole for hanging any hook of your choice. Print instructions Recommended to print with PLA; layer height 0.1 or 0.15 mm. You have to change the filament in the…
Sure, you can buy a paper version at your local stationery store and it will cost you next to nothing, but printing this model will give you number of benefits: Both hands are moving independently Hands stay in position and do not fall No…
Bridge support compatible with Ikea and Brio wooden train track. Minimalistic design that allows great variability of use. Main features: Tracks connector for better stability Stackable to create higher bridges Easily printable without…
Collection of earrings inspired by the beauty of autumn leaves. To get a more natural look, you should bend the printed earring to whatever shape you like. It can be easily done after warming it up a bit - I have used the hairdryer. Print…
Very simple Brio/Ikea compatible train station. Print instructions I recommend glueing the station into the prepared holes in the track to prevent the legs from breaking.
Practical organizer for earrings and jewelry. The hanger is very universal: the holes can hold hanging as well as stud earrings; the pegs can be used for necklaces, bracelets, rings, elastic bands and more. special part is designed for…
A simple and easy-to-print piece to cover table corners and protect children from injury.
A bus toy that you don't have to be afraid to give your kids. Children will also appreciate being able to open doors. Easy print and no post-processing. You can achieve the multi-colored effect by changing the filament twice during the…
Very handy keychain that can store your pills and few banknotes, so that you will have them around every time you need them. There are two threaded ends, each opening different chamber. Feel free to customize the dimensions to fit your…
This kitchen hanger is designed to add a wooden rod to hang whatever is needed. The model is available in two variants : 1) " Permanent " is ready for use when the rod does not need to be removed frequently , for example as a drying rack…
The dimensions of the holes fit the TePe brushes, but with the Onshape Confugurator you can easily adjust the parameters to suit your needs . You don't need to install anything, you don't even need to create an account. Everything can be…
This set for making concrete clock contains: Mold for the base part Part to shape the space for the clock mechanism in the back side All three clock hands In addition you will need: Quartz Sangtai 6168s clock mechanism (…
Dimensions: 18 mm (height) x 20 mm (width) x 2 mm (thickness) At the top is a hole for hanging any hook of your choice. Print instructions Recommended to print with PLA; layer height 0.1 or 0.15 mm. You have to change the filament in the…
Elegant and practical upside-down stand for roll-on deodorant. Useful for getting even the last drop out of the bottle. Designed to be robust enough to achieve great stability, so that it can be used without any gluing.
Elegant mini box with hidden hinge thanks to the use of magnets. Can be used for example as a giftbox for a piece of jewelry or to protect small and fragile things, such as SD cards. Since you have to interrupt the print twice to insert…
Original and interesting decoration especially for people from the Czech Republic. Do not hesitate to use it as inspiration and make your country's map! ;-) This map fits beautifully with The Czech Republic 3D terrain model by Ondřej…
Looks ordinary, but in reality this mug is specially designed to be really handy for picking blueberries or similar fruits. Main advantages of the design: Overall low weight thanks to minimize amount of material Funnel at the top to make…
Small earrings inspired by the visualisations of coronavirus. Dimensions: 12 mm (diameter) x 2.5 mm (height) From the back side there is a hole prepared for gluing the post with 5 mm diameter. Print instructions Recommended to print with…
Printed with 0.25 mm nozzle, 0.1 mm layer height. Change the filament in correct layers to achieve the multi-color effect.
Print-in-place advent calendar with opening windows, that hide a new QR code for each day with a link to content on the internet. Before opening, the windows are sealed with thin one-layer strip, that can be broken easily. Of course, you…
One of the most effective ways to learn vocabulary or memorize other important information is the flashcards method. This box will help you keep your cards organized and you can then take them with you wherever you go. Two slits are the…
Corner cover protecting especially children from injury. In shape of robotic head, inspired by Machinarium hero, robot Josef ( https://amanita-design.net/games/machinarium.html ). See also his friend, robot-girl Berta:…
It should be printed with 0.25 mm nozzle. Change the filament in the correct layer to achieve the multi-color effect.
This phone stand takes advantage of the beauty of organic supports, which are now available in PrusaSlicer since version 2.6. Of course you can print my design, but I reccomend to make your own! Everything can be done directly in…
This phone stand takes advantage of the beauty of organic supports, which are now available in PrusaSlicer since version 2.6. Please see the original model for detailed instructions on how to make a similar phone stand with your own design.
Very simple design, but it will surely please every six-year-old girl. Print instructions Printed with 0.25 mm nozzle, 0.1 mm layer height. You have to change the filament twice in correct layers.
When I was looking for a bedside lamp, I came across Immax Atmosphere Lamp ( https://www.immax.eu/immax-neo-lite-smart-atmosphere-lamp-3w-rgb-cct-color-and-white-dimmable-wifi-p13862 ). It suited me with all the parameters: control via…
The holder can be printed without supports if you have a good setup for printing bridges. The microphone holds very well thanks to the flexible paws and can be easily removed and retracted. I recommend printing with PETG to ensure…
To wszystkie aktualnie dostępne wyniki.
