Liczymy pasujące modele…
Flower Remix for MagnumDaner's Lego Wreath - https://www.thingiverse.com/thing:4676031 Print flat side down. Personally printed at 51% scale to match my reduced scale wreath, 100% scale should work for the wreath model, but is not tested.…
Interlocking hexagonal display shelves with hidden interlock pieces and customizable back-plates designed to fit Nintendo amiibo. Installation Notes Shelves are designed for use with #18 x ¾" wire nails. “Nail guide” is used for locating…
Print body with 0 bottom layers and no infill. 3-4 perimeters (walls). Print face pieces in same orientation as body. Print face pieces with brim, no support required. Recommend printing face pieces at slower speed. Face pieces should be…
Single piece haunted mansion gargoyle. Note that the model is front heavy and needs to be secured by glue or other means to attached surface. Also included single piece base with drywall screw keyhole and single piece base with no…
Added a pass-through hole for adding a hidden string/rope for mounting Thingiverse user ShinyObjects Haunted Mansion Wreath Skull to a wreath
Wall mount compatible with LEGO set Thanos: Ultimate Battle - 76107 Printed at 0.2mm layer height with 0.6mm nozzle, 15% infill no supports required Design is in no way affiliated with or endorsed by LEGO.
Cute ghost drinking coffee
Printed with 0.4mm nozzle with a brim at 0.12mm layer height, 99% infill
Edited files as well as original files which have been re-uploaded here are needed for complete build.
Print pumpkin nose with 0% infill, and at least 3 walls. Print ears with brim and organic supports. Mirror “Ear_275_percent” to print 2nd ear. It's not the greatest fit in the head but is what came from the original model. Body can be…
printed with 0.6mm nozzle at 0.2mm layer height, manual filament color changes at layer heights used to change colors. Design is in no way affiliated with or endorsed by Paw Patrol, Nickelodeon, or Build a Bear.
Printed with 0.6mm nozzle at 0.2mm layer height. Glue parts together, fit is loose but fills gaps. Personal print of half-cup failed and was printed in (2) pieces and glued together. Design is currently wobbly, and bottom needs added…
Loki Crown sized to fit @JuliaEbert's Mega Skeleton provided (2) options for printing, either print each half with the flat side facing down and glue together, or print single complete crown. Printed single piece model on a Bambulabs P1P…
Wearable badges that resemble the Paw Patrol Pup tags. Can be warn on most cotton clothing. Spacing designed to fit typical cotton shirt. Place backing behind clothing, and press badge into backing. To remove simply pull back the backing.…
quick santa bootprint stencils that I put together before christmas morning.
remix of single piece goddess statue to remove interior walls to reduce print time
Designed to fit Dyoramic's LEGO Style Lightsaber scaled to 187.87% to be compatible with Julia Ebert's Mega Lego-like Skeleton (10:1 scale) I modified the Dyoramic's lightsaber blade to be made of multiple pieces to allow easy scaling and…
Replacement parts compatible with Little Tikes water table https://www.amazon.com/Little-Tikes-Spiralin-Waterpark-Table/dp/B004INDQWY The pins for the water wheel need a bit of work/redesign but are functional. To get them to work…
Mini solder-able breadboard case bottom half compatible with https://www.amazon.com/EPLZON-Solder-able-Breadboard-Electronics-Compatible/dp/B09WZY8C
Remix of Chri81's brio female-female cheat tile to be 54mm long to match what I already had in the set.
glue bolt with matching threads to curtain rod into “finial screw insert” glue assembled components into finial, screw finial onto curtain rod.
Print with “open” side facing up
This model requires 2 parts pressed together to create a peppermint. Photo shows model printed at 60%. 60% model required light wacks to secure together.
prints support free 0.2mm layer height max All models are designed for the standard LEGO wreath. I've create various scaled skulls with the same sized hole. I've printed at the the 100 percent model at 50% scale
LED tea light holder insert for Veer stroller wagon. Requires (4)M3 screws. Models may need to be rotated for printing. Designed for use with these tea lights from Amazon.…
Nozzle Size label compatible with Ender 3v2 and other 8020 channel extrusion build frames
prints in (2) pieces, glue together
LED tea light holder insert for UPPAbaby Cruz stroller. Requires (3)M3 screws. Models may need to be rotated for printing. Designed for use with these tea lights from Amazon.…
Decorative shell for use as a couch riser with taped square legs. Top of shell measures 75.5mm, model tapers inwards at 11°, bottom, or small side of shell measures 67.7mm, and the shell measures 15mm high. Printed at 0.32mm layer height…
Print with supports printed with a 0.4mm nozzle at 0.32mm layer height
Design is in no way affiliated with or endorsed by Lutron.
I printed in PLA with (4) walls and 10% infill with a 0.6mm nozzle and 0.32mm layer height and the fit is a little tight. Recommend printing with fewer walls to allow some flexibility, additionally print may be improved with ironing.
edit the initials variable in the openscad file to customize recommend printing with supports
Description and instructions in progress Owl themed Phoniebox case built for raspberry pi phoniebox project and part I that I got from Amazon. Parts RFID TAGS - https://www.amazon.com/dp/B0CNSPLZLM RFID Reader -…
Print with 0 top and bottom layers and 15%+ infill. Designed for use with Crave Samsung Galaxy A54 Case from Amazon https://www.amazon.com/Crave-Samsung-Galaxy-Shockproof-Protection/dp/B0BRKDTZSM Design is in no way affiliated with or…
multi-part case for Pebblebee clip universal bluetooth tracker. Optional (2)M3 screws to better secure case onto tracker. Print core black pieces flat side down print white/red pieces so that they are standing up, supports may be needed…
Quick kite string wrap based on an image found online
remix of moon model so that I can mount an astronaut star projector figure
Diving board for kids water table
Set of inserts designed to be used on Legoland Pop badges to use them on a bulletin board without permanent modifications. 24mm model fit most of my pop badges, but I've created a couple variations as required to fit the badges I have.…
Designed to be printed in TPU Made for family member with a Ford Transit van. I have not used design myself, but the family member has reported that it works well.
To wszystkie aktualnie dostępne wyniki.
