Liczymy pasujące modele…
I remixed this model at a request to have the honeycomb design from another model. UPDATE: 11-24-2023 I updated the files and added more clearance for the USB and ethernet ports based on makes that have been submitted. The new files all…
I remixed RedSoda's filament guide to fit better on the Ender 3 V2. My remix is labeled Ender 3 V2 filament guide V2, I also uploaded the original files for convenience. If you print the normal one and it is about 3.5mm too far from the…
I remixed the original since when it was downloaded, the sensor block, bracket, wheel, and spacers were one solid piece. I painstakingly separated each piece and compiled them for use. This will fit on the Creality Ender3 V2 filament…
This model more closely resembles the wire decking on the racks in our warehouse. This is made to go with this model: https://www.printables.com/model/561782-mini-warehouse Don't forget to post your makes and get your prusameters! I love…
A Nozzle Holder that that fits inside a 40x40 Aluminum V Slot extrusion. Common on many Printers ( Ender 3 + Clones ). I remixed this because I wanted a handle to be able to open the drawer easier, of course it HAD to be in the shape of…
This model fits between 3 honeycombs instead of four and is 75mm deep. This will push into the inserts on the original HSW shelf. Don't forget to post your makes and get your Prusameters!
I remixed this from https://www.thingiverse.com/thing:4777997, I wanted a model with a solid center so I could add more color to it. It worked really well with a filament color change. Don't forget to post your make and get your…
I wanted a hook to hang goggles on when we stop, I couldn't find any models that were for a 1.75" roll cage so I designed my own. We used some rubber pieces we had laying round to go between the clamp and the roll cage so it doesn't…
I remixed this for a Polaris 2017 Polaris RZR 1000 S, but I would imagine it would fit most Polaris models. It might fit others also, if you have any questions about fit, please feel free to send me a message. I recommend printing the…
Have you always wanted a fabulous handlebar moustache but never had one ? For only a few grams of filament you now can have one! Don't forget to post your makes and get your Prusameters!
I remixed this model so it could be used for desktop purposes. Don't forget to post your make and get your Prusameters! I love to see people's makes
I needed 6 sets of shoe buckles for an upcoming theatre production of Sleepy Hollow. We didn't have a large budget then I realized that I could just 3d print them so here it is. It's 100% print in place, all you will need is 1" wide…
This model is designed specifically fit the size and weight of the millenium puzzle I printed in an elegant way. The base will need to be glued to the hanger part. The Millenium Puzzle is https://www.thingiverse.com/thing:5723661 Don't…
This is a 2 piece cover for the rail on the Byrna SD. My friend uses a belly band and found when drawing that the rail would catch on the fabric and not draw well. To correct this I remixed this model, the main piece slides on first them…
This is a remix of a Thingiverse model of the Winkie Spearheads from the Wizard of OZ. I remixed this so fit on a smaller build plate (220mmx220mm) and added threads so that it could be easily added to the dollar store broom handles…
This model fits between 4 honeycombs and is 75mm deep. It also happens to be the perfect size for 2 prusa badges side by side! This will push into the inserts on the original HSW shelf. Don't forget to post your makes and get your…
This is a Christmas light hanger meant to lock into aluminum fascia and hold strong but also be easily removable if needed. There are no screws or nails needed! I slipped mine between the channels in the soffit about one every 16 inches.…
I recommend 100% infill, this is not a large model, just over 5" long. This will help with stability. Supports are a must. Don't forget to post your make and get your Prusameters! I love to see people's makes.
I remixed the original to remove the salt and pepper grinder holders. Big props to the original creator! Don't forget to post your make and get your Prusameters! I love to see people's makes.
I remixed a Thingiverse model to be taller and accommodate the “oh crap handle” on a 2017 Wildcat XC Sport. The rod in the UTV is 22.9mm wide so the handle hole diameter is 23.4mm to allow for a good fit without being loose. All you need…
I made this to go with the mini warehouse model to put on my supervisor's desk on April fools day. This is made to look like a bin of parts we have at the factory i work at. I made 120 “blank parts” to fill it partially (used maybe 13…
I made this model for a joke video but some people wanted it so I decided to upload it. Print the pearl slowly and with a brim, I tested this on my K1 MAX as half speed and it worked well. If you still have issues, print the half without…
I made this to go with the mini warehouse model to put on my supervisor's desk on April fools day. These are models of rolls of sheet metal in coil form as they use in the factory I work at. Update: 3-19-2024: I added a file called…
My supervisor asked if I can make a scrap hopper for forklift training visual aid, this is what I came up with. It is not functional, it's just decorative, but a company name is easily added on the back. No supports are needed, just some…
I didn't like the covers I found for the Minimus Fan Shroud so I decided I wanted a Darth Vader one. I made this to fit the stock fan for the Ender 3 V2, but it should fit any 4010 fans. This model is made to go with the Minimus Fan…
I made this model because I wanted to set my rock golem (STL on etsy) to sit on top of my printer. If I printed tall things the cords would hit the legs. This way he is up there and nothing will knock him off. It's also my first attempt…
This model will fit in the honeycomb insert pieces for easier movability.
I made this tombstone to remind someone how their first character died, I thought I should share it in case anyone else had similar results. No supports are required, it's fully print in place. If you want me to make a specific one, ask…
I made a replacement knob for a 3M noise canceling radio headset to replace a missing one. It is a tight fit but I wanted it to be so it stays on as the original knob usually falls off. Don't forget to post your make and get your…
I needed a model of a prune for a play so in case anyone else does I thought I would share it. I made this model using the free AI website 3D.CSM.AI.
I made this model as a replacement foot for a RV stool that my parents noticed was missing. The stool they have is from Stromberg Carlson Products Inc. There's a spot for an optional ¼-20 set screw but it fits tight enough this is only…
I made this model to I could attach T-slot items to my Honeycomb Storage Wall. This will fit in the inserts of the original HSW model. Don't forget to post your makes and get your prusameters!
I made this to go with the mini warehouse model to put on my supervisor's desk on April fools day. These are models of sheet metal in flatstock form as they use in the factory I work at. Update 3-19-2024: I added a file called “Banding”…
This is a replacement foot for the backyard creations swing from Menards. We were given an old one that was missing a canopy and a foot so I modeled a replacement.
I wanted a label for organizing my key chain filament samples by brand. I added a few brands that I have and some popular ones. If one you want is not here, let me know and I will add it for you. Don't forget to post your makes and get…
Our camper awning plug had deteriorated due to sun damage, so I modeled a new one.. It is a tight fit, this is how it's supposed to be so it holds tight while traveling. This HAS to be printed in TPU. If you need any modifications, please…
To wszystkie aktualnie dostępne wyniki.
