Liczymy pasujące modele…
I wanted a way to hang up the bag for my ego mower when I wasn't using it. I didn't find anything online/would work with the pegboard I had, so I came up with this. The top is angled out because I don't have much space above where I…
I am using my grandpa's old DW733 planer which is lacking a dust collection chute, so dust just spews all over my garage. I made an attempt to design my own dust chute since there are screws for one on the back of the machine. I couldn't…
I really enjoyed https://www.thingiverse.com/thing:3310601 as a tree topper that was posted a couple years back. I had used it as my tree topper for a couple years, but always felt like something was missing. I realized what was missing…
A wall mount for a standard ego battery charger, but mounts the charger at an angle to allow for better space efficiency on your wall. Required Parts 2x M5 Heatset Inserts 2x M5 Thin Head Bolts:…
I really liked err404's take on this concept ( https://www.thingiverse.com/thing:1920453 ), but I wanted one that was split in two as I get hesitant when I have a print that takes 2 full print beds. Also, in the games I've played, we…
I wanted to hook up my sawstop CTS to my shopvac, but the host didn't quite fit. Not sure if this adapter will fit other shop vac hoses, but it works great for my shopvac (1-7/8 hose) I uploaded a version 2. Main change is I aligned the…
Many ssd cases I found either seemed over engineered for my uses, or probably suitable only suitable to leave on a shelf. I wanted something that I could ~toss~ place in my spare parts tub and not worry about damage to the SSD. This is…
Given space limitations for my printer, I set up a spool holder that mounts above my printer. This meant the stock bowden tube holder was always slightly awkward to route the bowden tube properly. So this turns it 90degrees so the bowden…
When building my new workbench, I wanted to incorporate my CTS Tablesaw, but didn't want to lose the ability to remove it from the bench. So I made some clips similar to those that come on the original stand from the factory. With these,…
Many drive cases I found either seemed over engineered for my uses, or probably suitable only suitable to leave on a shelf. I wanted something that I could ~toss~ place in my spare parts tub and not worry about damage to the drive…
Only tested with a small RC Pets collar If the collar is ~20mm wide and 5mm tall, this should work. I wanted to use a tile mate for home automation, but didn't find anything on printables for attaching it to a collar, so I designed this…
This cannot be printed on it's on. It must be used in combination with the remixed model I like the mkingery's battery dispenser, but I couldn't store enough batteries in it, so I made this extension. It doesn't require any changes the…
The Modi Plus can't be mounted the same way as the original Modi, so I based the hole placement for installing the screws based off the old mount I had (what this is a remix of). Then to actually secure the Modi, it acts as a cradle and…
This cannot be printed on it's on. It must be used in combination with the remixed model I like the mkingery's battery dispenser, but I couldn't store enough batteries in it, so I made this extension. It doesn't require any changes the…
Can hold 60 different bits and have room to label rows of different bits
I use this headset all the time, but the mic keeps falling down when I flip it up to mute. This can be frustrating when I know I'll be on mute for long periods of time. This print clips onto the headset and can swing with the earpiece so…
I had some extra sticks of ram lying around that I wanted to move to my spare parts tub, but I needed a case to store them in. So I came up with this, it holds 10 sticks of ram and I tried to make it tall enough to support some of the…
This is an updated design of my phillips norelco beard trimmer stand. It features: Folding design Integrated charger cable routing Prints without support material Updates since original design: The middle piece the bear trimmer rests on…
I wanted to be able to hook my tertial lamp to my ergotron monitor mount (specifically the Ergotron 45-241-026 LX) so that it saved desk space and was higher up (so that it could reach over my monitor).
This print consists of 3 prints: Main Body Front panel With a color swap for the text Bottom panel All are printed without supports, but there is some assembly required after printing: Use super glue to glue the front panel Use 4x 8mmX2mm…
I recently tried to use my shop vac for dust collection from my sander. While the hose almost fit on the sander, it didn't quite fit. So I designed this part to ensure a solid connection on both sides. Printed vertically in PLA, no…
See the updated model here: https://www.printables.com/model/419040-beard-trimmer-stand-2023-update Since I've bought this beard trimmer I've been frustrated that there was no stand for it (unlike other Norelco products), so I took it…
This adds a coffee grinder to the back of the OXO Brew Conical Burr Coffee Grinder to keep the cord out of the way. It's designed to use 20mm wide double stick on the back to attach it
I've printed a lot of Alexandre Chappel's organizers and wanted a way to integrate my nozzles into the same grid pattern. So this is a half height 1x1 organizer with room to organize: 0.25, 0.4, 0.6, and 0.8mm nozzles. I have 2 spare…
What are scissors besides two knifes connected by a rotation point? I used to have a knife block that had a spot for kitchen scissors, but upgraded to this knifeblock which had no such space. Wanted one so it was easy to find and use the…
We have a dog that loves to dig, so I designed this sign that can be printed with a single filament swap to go by the puppy's designated dig site. The holes are sized for a #6 / #8 screw
For my printer, I have a hyperpixel screen running OctoScreen and Octoprint (attached with this print https://www.prusaprinters.org/prints/47153-lcd-hyperpixel-4-touchscreen-cover) . That part is nice, but the USB connections both for…
We bought this dog brush and immediately sliced our fingers tying to remove fur from the tines/blades. We were worried about leaving the brush in a tub and cutting our hands when digging in the tub. So this is a sheath that covers the…
My apartment only allows me to put nail holes into the wall and I needed some shelves to get some more space. So I picked up the Fjallbo from Ikea and started to figure out how to mount it. So I designed this part so that I could still…
This is a bracket I designed to create hooks on my french cleat wall. I wanted to be able to print the cleat part of the bracket and then use off the shelf dowels to make some hooks. Ended up coming up with a design that is fully…
I designed this to hold my rabbeting bit with all of the bearings. In addition to just storing the bearings, I added: Labels to indicate how deep of a pass would be taken with that bit Wrench storage that helps lock in the smaller…
Holds a Lutron bridge in 1u. I think the screw holes will work with an m2, but I ended up just drilling it out to use an m3.
To wszystkie aktualnie dostępne wyniki.
![[ALCH] Nozzle Organizer](https://media.printables.com/media/prints/106281/images/1060058_eda5ea67-3749-4fcf-989f-5e701f20efa0/pxl_20211226_224056992.jpg)
