Liczymy pasujące modele…
Test the maximum printing speed of your extrusion system! The model can be scaled in X and Y to fit your buildplate. There is a small notch every 2 mm to indicate a speed change. GUIDE Load, orient and scale the part to your liking Enable…
Wydruk około 0,93 €–1,14 € nettoWstępna wycena jednego wariantu
Conically sliced (16°) Bent Pipe for the Prusa Mini. Download the attached GCode file and directly print it. The procedure used is described here: https://www.cnckitchen.com/blog/guide-how-to-use-conical-slicing Might also work on…
Wydruk około 1,66 €–2,03 € nettoWstępna wycena jednego wariantu
Conically sliced (16°) Christmas tree for the Prusa Mini. Download the attached GCode file and directly print it. The procedure used is described here: https://www.cnckitchen.com/blog/guide-how-to-use-conical-slicing Might also work on…
Wydruk około 0,72 €–0,89 € nettoWstępna wycena jednego wariantu
Fits 20x5x2 mm or 20x6x2 mm magnets: https://geni.us/sWgcaKw (affiliate)
Wydruk około 0,45 €–0,54 € nettoWstępna wycena jednego wariantu
This is a method to improve the layer adhesion of 3D prints. Made with Simplify3D version 5.
Wydruk około 3,27 €–4,00 € nettoWstępna wycena jednego wariantu
Conically sliced (16°) Overhang Tower for the Prusa Mini. Download the attached GCode file and directly print it. The procedure used is described here: https://www.cnckitchen.com/blog/guide-how-to-use-conical-slicing Might also work on…
Wydruk około 1,38 €–1,69 € nettoWstępna wycena jednego wariantu
Corner bumper prints without any supports. Use a hard TPU if possible but even some regular PLA is better than nothing. If you have adhesion problems use a brim. Use some double-sided tape to attach.
Print your own transparent PETG or PCTG parts and dial in your parameter using this small model. Print time ~1h. My baseline settings 0.4 mm nozzle 230 °C nozzle 80 °C bed 0.12 mm layers 1 perimeter 0 top/bottom layers 100% aligned…
Print your own case for the CNC Kitchen Threaded Inserts Soldering Tips (M900 Style)! UPDATE: All NEW cases available here: https://www.printables.com/@CNCKitchen/collections/2867288 Update 2023-08-13 Added case for V2 tip with easy-grip…
Some sample G-Codes to benchmark the extrusion system of selected printers. Find the full tool and a sample evaluation here: https://github.com/CNCKitchen/ExtrusionSystemBenchmark
This is a simple extrusion test I mostly use to dial in my extrusion multiplier. Instructions: Print WITH supports! (WHY? So that first layer inconsistencies don't ruin the results) 100% rectilinear infill 1 perimeter I usually print them…
Get the CAD and STL models of our inserts, to use them in your designs! Purchase original CNC Kitchen Inserts in our store CNCKitchen.STORE , at Prusa, or at a ton of resellers ! Get suitable soldering iron tips at CNCKitchen.STORE , at…
These are some demo files to try out Arc Overhangs on your machine. USE AT YOUR OWN DISCRETION! This is EXPERIMENTAL! The start G-Code is very generic and should work on many machines, yet adjust if necessary. Play around with print speed…
This is the test hook I've been using in many videos to test the strength of various 3D printed materials. My usual print settings can be found here: https://www.patreon.com/posts/filament-test-16238656
Test part for ringing/ghosting test. Category: 3D Printing Tests
3D printed holes often turn out too small, which can make installing heat-set inserts a bit tricky if the pilot end doesn't fit the hole. These blocks are designed so you can determine the right diameter to use in CAD, ensuring that your…
Try out BumpMesh.com ! BumpMesh is a free, open-source, browser-based tool for applying custom displacement textures to your 3D models - no account, no software install, and no expensive licenses required. Simply load your STL, OBJ, or…
This is a refillable Activated Charcoal Filter Box for the BambuLab X1. The filter medium should be replaced every 50-100h or as soon as you start smelling your ABS prints again. It saves you money and reduces waste! Best used with…
This is the fully revised Version 2.1! Watch how to make and use one: https://youtu.be/IM2il-zT2fA Bill of material: Suitable sharpening stones set(aff): https://s.click.aliexpress.com/e/_onjGrqw OR Individual sharpening stones (aff):…
WARNING: You can damage the planetary gearbox if you're not careful and might even void your warranty. Use the alignment tool, referenced in the Nextrunder manual to be safe. Print in Clear PETG 0.1 mm layer height 10 mm/s 100% aligned…
A simple screw-mounted air filter for the CORE One. It will require higher fan speeds during PLA printing due to added resistance. I manually increase the speed to 65%, which results in ~32°C in the chamber. I strongly advise always…
A variation of my other corner protector, optimized to be printed in TPU. Use “Avoid Crossing Perimeters” to get rid of any stringing. Scale it for your application.
Print without supports. Use Fuzzy skin for a better grip (included in the 3MF). Update 01/19/2024: Due to popular demand I added two version with threads for mounting the mic to a stand or tripod. One is with printed ¼" threads, the other…
Print your own case for the CNC Kitchen Threaded Inserts Soldering Tips (Weller Style)! CNCKitchen.STORE…
Stackable sieves in 3 sizes. Print instructions Use mesh modifiers to have the lower part printed without top or bottom surfaces. Adjust the infill density for different mesh sizes. Recommend grid infill.
Mini Stefan Bust created by Wekster ( https://www.patreon.com/wekster ).
A pickle 3D scanned using the Creality Raptor in Laser Mode. Get a Creality CR-Scan Raptor: https://geni.us/CR-ScanRaptor (affiliate)
Since EMT is hard to find in Germany I re-designed the hangers so they can be used with the IKEA HUGAD curtain rods (28mm - version || https://www.ikea.com/de/de/p/hugad-gardinenstange-weiss-10217141/ ) Designed so that two pieces (mirror…
Ersatzteil für verlorene Radschraubenkappen für die Sechskant sowie Sicherheitsschrauben. Wenn zu locker oder zu stramm, dann einfach um ein paar Prozent größer oder kleiner skalieren. Perfekt passend bei meinem Golf 4. Replacement part…
This is a mold for an improved silicone sock for the E3D V6 hotend that is harder to come loose during printing. Use with 2-part high temperature silicone. Video on the whole process: High temperature silicone (aff):…
Find out if your 3D printer and filament is able to print integrated threads into your parts! What's the strength of 3D printed threads: https://youtu.be/iR6OBlSzp7I Category: 3D Printing Tests
Printed this in Prusament PCBlend so that it doesn't deform in my garden shed in summer. PETG should also be working, though. Design has some spikes in the back, to grip into the wood and prevent it from rotating.
AC shroud to convert the one-hose AEG AC to a two-hose AC for better efficiency. Fits a 125mm intake hose. Also includes the 3D scan of the back.
Make your own DIY all-around silicone sock for Revo nozzles. NOTE: ONLY USE SUITABLE, HIGH-TEMPERATURE SILICONE! Variant 1: Two-Part Silicone Pour the bottom of the mold ⅔ full with silicone (~0.5ml) and screw it together until the…
If you want the same look as on the picture then print them without top and bottom layer and set a cool infill pattern. Watch the YouTube video I created them for: https://youtu.be/ffg9dArNfCg Category: Signs & Logos
Quick remix to install it onto a 34 mm / 32.5 mm valve. Includes the adapter extension pin.
Find out the stiffness of your printed materials. This is a three point bending test jig. Video on YouTube: https://youtu.be/te0Wwf7Dxj4 Category: DIY
I was tired of designing my labels in CAD, so I made a Free Online Generator : https://cnckitchen.github.io/gridfinityLabelGenerator/ Print at 0.2 mm layer height with a color change in layer 3 for best contrast. The Arachne wall…
3D Printable case for the CNC Kitchen TS100 / TS101 Heat Set Insert Soldering Iron Tips compatible with, for example, Pinecil or Miniware irons. Fits the Insert Extractor V2 (not the V1). Compatible with: (GLOBAL - shipped from Germany)…
UPDATE 09.10.2021: Added V2 of the idler with a tensioning mechanism. Uses an M3x40 screw and a suitable spring. This replaces the old idler on the extruder and make space for a standard 11mm extruder gear found on many bowden style 3D…
Housing to install a Solid State Dehumidifier into an AMS. I highly recommend either hard wiring the MDL-3 or using an XT-60 plug or similar instead of the barrel plug I showed in the video to reduce voltage drop.
Print with at least 4 perimeters. Not a lot of infill required (~10%). PLA worked fine for me. Increase printing temperature by 5-10°C for good layer adhesion. Category: Hand Tools
Fan shroud for the Tevo Tarantula to be used with a radial fan: http://geni.us/cnckitchenradialfan I made this especially for the dual nozzle version of the Tevo Tarantula, but also uploaded a single nozzle version. Dual nozzle Tevo…
Fit the CNC Kitchen Insert Straighteners: International: https://cnckitchen.store/products/insert-straighteners United States: https://cnckitchenus.store/products/insert-straightener-m2-to-m10-2-56-to-g1-9 The tolerances can be a bit…
3D Printable case for the CNC Kitchen Weller ET Heat Set Insert Soldering Iron Tips. (GLOBAL - shipped from Germany)…
These G-Code files help you to easily feed 200 mm of filament through your nozzle at different flow rates in order to adjust your Idler tension. Just copy the files onto your SD card, pre-heat your hotend and select the one you want.…
Test the capability, speed, and waste of your multi-color printer!
3D Printable case for the CNC Kitchen 900M/T18 (for Hakko, Lonovo, Sremtch…) Heat Set Insert Soldering Iron Tips. Compatible with: (GLOBAL) https://cnckitchen.store/products/soldering-tips-set-adapter-compatible-with-900m-t18-e-g-hakko…
I currently CAN'T recommend using this upgrade becaue I've serious issues while extruding and am not 100% where it's coming from! Also my stock extruder layout seems to be different to the currently shipping units. This is the first…
I designed an improved fan shroud the Anet E10 which solves the temperature issue and improves part cooling. You can also find the sliced GCODE in the download section. If you want to buy an Anet E10 and want to support my YouTube channel…
Hand crank adapter for the Precious Plastics Basic Plastics Shredder. Fits the 20mm shaft with the 6mm groove stone. Fits a 25x25mm steel tube with 1.5mm wall thickness. Includes the suitable handle. Press in two 608 bearings on either…
Crude first version of a gear system to motorize this camera rail: https://geni.us/xP6sH The gears are currently simply press-fit. I encourage anyone to improve on the design! Works great with Applied Procrastinations control PCB:…
This is a set of angle guides for sharpening steels with a diameter of 14mm. This will help you to hold the perfect blade angle when sharpening your precious knifes. Category: Hand Tools
3D Printable case for the C210 Heat Set Insert Soldering Iron Tips compatible with, for example, Miniware TS21, Fanttik T1 Max or YIHUA 992D-II 2-IN-1. Fits the Insert Extractor V2 (not the V1). Compatible with: (GLOBAL - shipped from…
Filament holder that was topology optimized in Fusion 360. Fits a 25mm wood rod. Print the left holder mirrored. Check out my tutorial: https://youtu.be/hAGFkWkqocI Category: 3D Printer Accessories
Sample 3D scanned with the Creality CR-Raptor in LASER mode. This scan was done in 3 takes. Front, Back, Side. Get a Creality CR-Scan Raptor: https://geni.us/CR-ScanRaptor (affiliate)
Want to avoid bloody fingers when pitting your 3D printers wires in the plastic sleeving? This is the tool for you. Print with only one wall. Category: 3D Printing
Sample 3D scanned with the Creality CR-Raptor in NIR and LASER mode. Get a Creality CR-Scan Raptor: https://geni.us/CR-ScanRaptor (affiliate)
Milled this from 4mm aluminum. Don't own a CNC mill? Print out the PDF and use a jigsaw and drill to make one yourself. Watch the video about the optimization and milling process: https://youtu.be/AHSTbaduXUM Category: 3D Printer Parts
Rose Thermorph. Put into 70°C water and let it morph. Printed in dasFilament PLA and Fiberlogy 40D TPU. Sliced in OrcaSlicer 2.2.0
This is a replacement gear for the Emsa 512991 foldable salad spinner. http://amzn.to/2oaOTb3 Watch me design it: Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: No Resolution: 0.15 Infill: 50% Notes: Minimum 3…
Snake Thermorph. Put into 70°C water and let it morph. Printed in dasFilament PLA and Fiberlogy 40D TPU. Sliced in OrcaSlicer 2.2.0
Sample G-Code for my Gradient Infill Method. Should work on most Bowden Style 3D printers with 1.75mm filament. Category: 3D Printing
First version of my 3D Printed Quadcopter frame. The configuration is currently for the parts which I still had laying around at home: KK2 board (…
Sample 3D scanned with the Creality CR-Raptor in NIR and LASER mode. Get a Creality CR-Scan Raptor: https://geni.us/CR-ScanRaptor (affiliate)
3D Printable case for the Slim Tip CNC Kitchen 900M/T18 (for Hakko, Lonovo, Sremtch…) Heat Set Insert Soldering Iron Tips. Compatible with:…
3D Printable case for the CNC Kitchen EP5 Heat Set Insert Soldering Iron Tips. Compatible with: https://cnckitchen.store/de/products/kopie-von-soldering-tips-set-ep5 CNCKitchen.STORE
Twist Ring Thermorph. Put into 70°C water and let it morph. Printed in dasFilament PLA and Fiberlogy 40D TPU.
3D Printable case for the CNC Kitchen Weller LT Heat Set Insert Soldering Iron Tips. Compatible with: https://cnckitchen.store/de/products/soldering-tips-set-compatible-with-weller-lt CNCKitchen.STORE
CPU Cooler bracket for the Thermalright HR-02 for AM4 sockets. Use with care! Almost fried my CPU with it because it deformed. Watch my video about it: https://youtu.be/nzRb4owDffY Category: Office
Standard Hinge Thermorph. Put into 70°C water and let it morph. Printed in dasFilament PLA and Fiberlogy 40D TPU. Sliced in OrcaSlicer 2.2.0
3D scanned with the Creality Raptor in Blue Laser mode.
3D Printable case for the CNC Kitchen Weller XT Heat Set Insert Soldering Iron Tips. Compatible with: (GLOBAL - shipped from Germany) https://cnckitchen.store/products/soldering-tips-set-compatible-with-weller-xt (USA)…
Screwhole pulg / cover for my Emsa Salad Spinner. Watch me design it: Category: Kitchen & Dining
Our Silky Chicken was too short for the drinker, so I designed ~40 mm shorter feet. Snap in like the original ones. Printing No Supports neccessary Remove the built-in support after printing Print preferably from PETG or other higher…
3D printables swatches for all patterns from BumpMesh.com
To wszystkie aktualnie dostępne wyniki.
