Liczymy pasujące modele…
Print: I printed with PETG with 0.3mm and variable layer height (because of thread). A brim is recommended. Food safety: at own risk. Depending filament and print. Please let me know your experience. 2024.5.06: version without air…
Wydruk około 1,82 €–2,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Filament clip to fix the filament on spooles not in us. Prevents from tangling. it is fixing the filament with a five fold gripping mechanism You need 1 clip for each role not in use! For rolle wall thickness 2mm 3mm (Prusament PLA) 4mm…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printed with “Prusament PETG Neon Green Transparent” 0.4mm nozzle. 100ml (Markings: 25-50-75-100ml) 29.4.2024: additional scoop sizes for Pet food or other things - 25ml - 50ml - 200ml Other laundry helps measuring cup for liquid…
Wydruk około 1,20 €–1,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have also a foto of a penrose triangle I carved around 1990 from limewoood. the print is quit challanging for slicer and printer. Can you do it better? 2023.02.06 I added a version withflat backside and hole for a magnet (8mm diameter,…
Wydruk około 0,68 €–0,83 € nettoWstępna wycena jednego wariantu
Be award, insects belong to the ecosystem like all beeings! Print in one or two colors. The colour of the cap might influence the success rate. Fruit colors like yellow orange should be best. After printing clean the entering tunnel. Any…
Wydruk około 1,38 €–1,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hollow whistle in different sizes and different sound frequencies. To whistle, close the side holes with thumb and index finger and blow into it.
Wydruk około 0,15 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The toothbrush does not have to load all the time. Sonicare3 The stand workt as expected but was clearly improvable. This is a clearly inproved version. no gluing needed! Sonycare4 For placement on gridfinity grid. Sonicarehalter Print…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
Holder for nextruder nozzle cases and nozzles. You need round magnets 6x3mm (or smaller) Set on the slicer a printing pause and insert magents on the right time (about last 8 layers).
Wydruk około 1,33 €–1,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Stl is solid body, print in vase mode with maximum thickness (i did with 3mm). Size: 80x80x80 mm Basic vase
Wydruk około 1,37 €–1,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print: Normal support is not enough! I print it upright with 2 support enforcers. On one version I added also a flat surface for better placement on the printer bed. To change the size use scaling function of your slicer. Constructed with…
Simple design. Fast and easy print. PETG recommendet because of elasticity. In my case no brim was needed to keep it on the print bed. To prevent it from sliding from the desk put white glue on the touching surfaces of the clamp, let it…
Printing material: PLA: can be more ecological PETG: is more UV resistant Sizes: hight diameter (inner) diameter(outer) 6cm 12.2cm 20cm (fits for MK4) 6cm 18cm 6cm 7.2cm 15cm Slug fences of same model/size are pilable. Slug fences are…
Easy print! I use variable layer hight for a smother top with less stairs. Sizes: 12x3cm 10x3cm 7x3cm 8.56x5.4cm (credit card size) 8.56x5.4cm (credit card size with wide top for text) 1.8x3cm (minimalist tiny jocke version) to…
Print in vase mode. Do not use with normal candles! 2023.12.05: added 2 variants with hexaconal pattern.
Surface with only one side! https://en.wikipedia.org/wiki/M%C3%B6bius_strip Challange is the print orientation and the needed support to minimize the negative impact of the touch points of the support. My best experience (not as nice as I…
Not easy to print nicely as it has no flat bottom surface. Print upright with support. I use also raft layers. Remark: this object is also the JSON Logo.
Define size and thickness with the slicer. You can also load a set, then “split to objects” and set number of each variant (on PrusaSlicer). Since I work with my MK4, brim is not needed any more because of better first layer! :-) If you…
Print upright. PETG or PLA. 21.6.2025:I moved the text to the left and right side. It is easier to read for left and right handed people. Other laundry helps Please finde also my scoop for detergent powder:…
5.3.2023: new variants with front display for bags (10cm and 15cm) 5.8.2024: new variants 7x8cm and additional hight of 20cm. 14.11.2021: New variant “Follet” Tea (5.5x9.8mm) 5.5 * 9.8cm (Follet Tea) 6.5 * 8cm (Twinings)
Glue in an magnet of 3mm thickness and 8mm diameter. Trees: Black Elder/ schwarzer Holunder Ginkgo biloba Hazle/Hasel Holly/Stechpalme Oak/Eiche Sycamore/Platane Chestnut/Kastanie Acer plantanoides/Spitzahorn Beech/Buche Cherry tree /…
no frost yet so i did not have the oportunity to try it. print with 4 wall layers to have it strong enough (Prusaslicer: Layers and perimeters/vertical shells/perimeters:4)
Door hook for doors with different thickness (7-25mm). 13mm depth (hook). 10cm length
Rotating Ellipse Toy as fidget. 75mm length. Length to wide in golden ratio. Model is with small gaps. you will need a good printer. elements might stick slightly together, you might have to deblock. Versions Rotating long axe Rotating…
I created the design parameterized about length, width, height and wall thickness. (Ask if you need specific measures). I use the boxes to store small printed parts. Printing with 0.3mm works, but with 0.2mm or less it looks nicer!…
Print works well, but I have still some stringing problems. I printed with PETG and reduced the temperature of the 2end+ layer to 240°C I am happy to get hints. 2121-12-12 New file with bottom coaster and fitting inlay. Coaster 90mm…
With this watering device water is whirled in a vortex device. It commes out as a transparent water semisphere. Some people claim that whirling water in a vortex increases its quality. Parts: Handle, vortex nozzle and Gadena connector…
Geometricaly interesting object with one constant diameter like a sphere. https://en.wikipedia.org/wiki/Reuleaux_tetrahedron As all surfaces arecurbed, object has to be printed on a support. Until now, I did not get a proper printed…
Fast and easy print. I use brim to keep it better on printbed. it is quit helpful but slides easily of the table. put white glue on the touching surface of the clamp - let it dry, it will be a bit sticky and not slip away any more. fixed…
it is a remix of a egg in our fridge. Print upright with support. I print with PrusaSlicer above thr print sheet (see file "Egg3-60mm-voll.3mf" when you add a block to the print sheet, the egg can be placer above the print sheet) Sizes:…
Printing: Use top fill pattern to create a nice top. (PrusaSlicer: Print Settings/Infill/Top Fill Pattern) 6.25026: several round plates added (50-150mm diameter)
In printed with PETG with 0.2mm nozzle. Print without support. Check and clean the printed object properly to prevent damaging textiles. Other laundry helps measuring cup for liquid detergents:…
Model 1: Stand for 4 tubes: Diameter: 2x52mm, 42mm, 32mm. Heigth: 55mm. Model 2: Stand for 7 tubes: Diameter: 3x52mm, 2x42mm, 2x32mm. Heigth: 55mm.
It is absolutely not perfect but it is a easy way to reduce shadows a bit. Use at least two of them, one on each side.
I printed upright with thread connector on print plate. 0.4mm nozzle, PETG, 0.2mm layer hight. 3 wall layers. You can use a brim to increase stability on print plate.
crooked whistle!
Controll the size with (Prusa) slicer. You might need the leaves in a differend size. Define in the slicer size x and y proportionally, then define z (height) indepently. Designed is 1mm heigth. Vase mode: Nice objects are created if you…
Print in vase mode. I printed with 0.4mm nozzle. Different nozzle sizes will also work but change the appearance slightly. I recommende at least 4 bottom layers for bottom stability. I use prusaslicer, I do not know it it works also with…
Filament clip to fix the filament on spooles not in us. Prevents from tangling. It is fixing the filament with a five fold gripping mechanism. You need 1 clip for each role not in use! Cut end of filament 45 degree! Insert the end in the…
print on the left flat side. sizes: 60mm (for business cards) 70mm 80mm 6.4.2023: added additional sizes and optimized design.
size with 5cm edge length. 1mm heigth. Define size with slicer. keep height >1mm. 30.12.2022: I added a version 3cm edge and 2mm thickness (easyer to take from print plate)
the needle stopp drop prevents the wool to drop from the needle.
Connect two PET bottles. Fill top bottle with water. Shake circulary to give the rotational impulse for the vortex. Watch the vortex! Bottles with straight walls work better. Try different bottle sizes (0,3l, 1l,l, 2l,..). Small holes do…
Tea light holder for LED. The example is printed with “Prusament PETG Clear”. Fits for LED tealights of 38mm diameter. Tea light holder for LED
Miniatur LAK tables in differene sizes 1:5 1:10 1:20
The files are: Silicagel container/bottle for Prusa USS Drybox screwable cap measuting cap (size of container) funel (to fill the container) Regeneration Print in PLA or PETG if you take out for regeneration. Print with adapted heat proof…
To fill a surface you need also the reflected tile version. This is why I printed it out in two colors. Change color on 50% height. To play around you will need a batch of tils. Take care that same color is on top and bottom for print.…
Own construction according Video of George Hart http://georgehart.com/sharp/. 6 rhombi and 12 kite-shaped faces. 300 years ago invented but never constructed in the meantime until this days. stl files of 3 different sizes made from a cube…
For 22/26mm rod. I printed with a 0,4mm nozzle with 0.2mm layer hight and 15% infill. To increase strengt, increase number of walls.
Easy to print postcard stand for 3 or 4 Postcards in a rotative triangle/square.
Tea light holder for LED. The example is printed with “Prusament PETG Clear”. Fits for LED tealights of 38mm diameter. Never use for real candles! [2021-11-12]File updated. only small optimisations.
to fix on bottom profile (left or right) by screw. you need: M3x8 screw (1) M3nS nut (1) The toolholder bottom is neutral (same for left and right) and can be used for different elements, like the toolholder and the waste bin. The printed…
All solids have the same edge sphere diameter . To get the solids in smilar size you can take same edge length, same inner sphere diameter, same midsphere diameter or same circumscribed sphere diameter, The edge sphere diameter commes the…
Print all 3 files files (I used PETG 0.2mm) files: box outside top inside top proper print is mandatory, otherwise small structures will be destroy. Bend sides up and fix on top with the outside frame (quit challanging). (the top print…
for my plant pot https://www.prusaprinters.org/prints/62822 I need many cuttings. I work with peppermint because they are easy to root. The box with grid keeps the stems separated and moist. The top is printed with transparent filament.…
Razor Stand for Gilette razors. (hole 20mm diameter) If you need it heavier, print with high infill %.
For arbonia radiators. (25.5mm pipe diameter, 12mm distance pipe to pipe)
I have designed the objec customizable. I can change imediatly for a bigger 8 or a steel balls of a different size. The steel ball can only be insertet (or fall out) in the center!
Print works well, but I have still some stringing problems. I printed with PETG and reduced the temperature of the 2end+ layer to 240°C. I am happy to get hints. Test botton if it is waterproof (depends printing).
Print at least 10 of each of a certain size to start. sizes hollow (edge length): 20mm 30mm
Print: PETG, printed upright, no support needed, 0.4mm nozzle, 0,2mm layer hight. Closing the vent inlet will reduce the liquid outflow until 50%. Some liquid will still escape through the air inlet. Food safety: at own risk. Depending…
Print the bookend on the side for more stabilität! versions: 12.4.2023: I added a version with bottom on both sides. 15.4.2021: I added a label holder and label for book shelf. (on a picture the measures to make own labels)
Sizes : 17mm 22mm Sets with of sliced-file with Pruseslicer PETG 0.1mm and concentric circles for top and bottom layer for ornamental reasons.
Printing: I recommend to print with name down on printing plate. A structured print plate will make the surface nicly. Set 0.2mm layer height or variabel layer hight. Material: PETG. On the neutral file "AA-neutral-Comb" you can add any…
print it horizontally (to get a strong hook) with support.
Print in vasemode. With nozzle size you can influende stability and tranparency (for some filaments)
Bracelet Holder 70 and 90mm hight. Gap for easy grip. Print: Easy print with 0,2mm or biger nozzle.
Puzzle preparation: print for one puzzle 3 center and 6 side parts. put 1 center element and 2 side elements together for ⅓ of the puzzle. (you need to push hard) Puzzle: try to put them together to a disc. Work with different color…
Print in vase mode 0.4mm nozzle -→ detailled structure 0.6mm nozzle 0.8mm nozzle -→ structure not so detailed, pipe more stable and faster printed Play with transparent filament and colered paper inside.
I store used and dry desiccant beads in PET-bottles (with thick walls). I used my old funnel but some of them jump out . I created this funel with high vertical walls. It works!
I printed it with PETG and even with procelain (Photos).
The addon fits perfectly for my specific brabantia dishdryer. Discloth dries faster and smells less. Printed uprightwith PETG o,2mm nozzle.
Printed with with 0.2mm nozzle. Printed with Prusament PETG Signal White Prusament rPLA Algae Pigment Best outcome if you print with variable hight. The infill will influece the quantity fillament used and the weight. Change size with…
After printing clean profiles properly before sliding in. This remote holder is fixed to the bottom side of a shelf! Stick the round part with doubel sided tap or use screws. Stick well, otherwise it drops! Or better use screws.
This bowl helps to paint small objetct by showering suitable color over it. You need two identical bowls. One to shower over, the other to catch up the paint. process has to be repeted several times. I used it for sls printed objects. fdm…
Penrose rhombi tilings with box. Box for 10 Rhombi (5 each) on each layer. (for tils with 40mm edge) Box for 50 rhombi. The tils are small (10mm edge and 1mm thicknes). Set correct size by scaling in slicer. All tiles are two objects and…
Simple design. Fast and easy print. PETG recommendet because of elasticity. In my case no brim was needed to keep it on the print bed. To prevent it from sliding from the desk put white glue on the touching surfaces of the clamp, let it…
Printing in white is nice to show pattern by the shadows. You have to print quit a number to create nice patterns. Models: 40mm edge length. Small and big rhombus. 30 Degree angle in height.
Print upright with support. The print quality of bottom side is the challange. Print with low fill density to keep light. Us metall fish hook and split ring.
Print in one or two colors. The colour of the cap will influence the success rate. Fruit colors like yellow orange should be best. After printing clean the entering tunnel. Any problem with fruit flies? Put in WECK-Glas 1cm of water , 1cm…
There was no space on the normal cloths stand, on the bottom was a mess with the hooks of empty hangers. This was the solution! You need two printed identical side parts, a wooden rod and a wooden bar of the needed length. 28mm wood rod…
12 pentagons and 20 notches. Print notches upright with brim. My testprints are done with PETG. Assembling is quit callenging. But the final dodecahedron is very stable. fix always 3 sides with one notch gentely. When all done pusth the…
Ventilation nozzle with ½ inch thread. The water sucks air in with bernoulli effect. Screw the nozzle on the end of a water hose. Includ a ½ inch seal. Open water with pression. Keep the air inlet above water.
Listerine mouthwash bottles often leek a bit and it is not nice locking below on the bottom. This printed base fits perfect, needs only little space and solved this problem in our bathroom.
Printing is quit tricky to get perfect edges. I print horizontally with support.
Printed with PETG. 0.2mm layer height. Please unblock each ray gently after print.
The pruse enclosure has on the center of the top a rectangcular hole (55x10mm). This add-on guides the tube inside. 4.6.2026: File updated. Tube sticks better in hole because of additional curve.
Plate for Francis coffee machine with coffee bean pattern instead of grid pattern.
12 Elements (about for 10cm diametre) (by spliting you can delete the last elements on the end to shorten it) I did the test printings with Prusa coreONE, Prusaslicer, PETG, 0.2mm layer hight structured.
Are you always losing on egg tapping? With the mountain side of this egg you never los again. Print with a one color printer split in object in slicer (egg/mountain) and print seperately, in colors as you wish, assembel and glue. Print…
Spare part; Short vertical pipe Additional part: Vortex element (conteins suport elements to break off.
To wszystkie aktualnie dostępne wyniki.
