P
PrintablesPeter Broeders
XTouch enclosure by TT : The Rear Mod - for hex socket bolts
The Rear Mod - for hex socket bolts (6x M3x10)
- Pobrania
- 139
- Polubienia
- 16
- Ocena
- 5
Wszystkie modele
Liczymy pasujące modele…
P
PrintablesPeter Broeders
Lerdge Mosfet Case Base Remix
Thx algenist for the models, the mosfet fits perfectly: https://www.thingiverse.com/thing:3313893 I added some mounting holes to the base. no support or raft needed to print this Print instructions no support or raft needed to print this
- Pobrania
- 77
- Polubienia
- 7
- Ocena
- 0
P
PrintablesPeter Broeders
GEEETECH A10M Build Plate for S3D
thanks to "apak" for the A10M model remix of GEEETECH A10M Build Plate for PrusaSlicer by apak link to original file: https://www.thingiverse.com/thing:3866954 modified the model for use in Simplify3D
- Pobrania
- 47
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPeter Broeders
Remix of LM8UU bearing mount
Remix of Float LM8UU bearing mount for Anet a8 by ksdj55 : https://www.thingiverse.com/thing:3601845 I've added holes for straps and seats for M4 nuts also works on the Anet A8+
- Pobrania
- 47
- Polubienia
- 2
- Ocena
- 0
P
PrintablesPeter Broeders
PI Camera Mount
PI camera mount, couldn't find one... can be used with something like this: https://www.thingiverse.com/thing:2886101 enjoy... ;) Print instructions Infill: 30% Supports: yes
- Pobrania
- 46
- Polubienia
- 5
- Ocena
- 0
P
PrintablesPeter Broeders
SkyRC GSM-010 GPS Meter Remix
dp106 did a great job: https://www.thingiverse.com/thing:3390822 version: SkyRC_GPS_MOD_20190217 -added more space for mounting a strap, it was a littlebit to narrow version: SkyRC_GPS_MOD_20190202 some things I've added: -the base is…
- Pobrania
- 41
- Polubienia
- 0
- Ocena
- 0
P
PrintablesPeter Broeders
Absima Crawler CR2.4 Sand RTR + additonal JEEP Body - Body Post
Body Post for the Absima Crawler CR2.4 Made this for fitting the extra Jeep body... (could also fit the RGT RC4 Bowler / Barrage) Remark: holes must be drilled after printing and the posts aren't the right length, some cutting must be…
- Pobrania
- 41
- Polubienia
- 7
- Ocena
- 0
P
PrintablesPeter Broeders
Reely Dune Fighter Skid Plate Front and/or Back
Skid plates for the Reely Dune Fighter. Fits on the front and back. also for the FS Racing 53625 Marauder Print on the smallest side. I used a raft. Enjoy! Print instructions Infill: 90%
- Pobrania
- 40
- Polubienia
- 2
- Ocena
- 0
P
PrintablesPeter Broeders
Charge Block Remix XT90 XT60 T Plug and JST
This is a remix of the XT30, XT60, XT90 Charge Block by bwegner : https://www.thingiverse.com/thing:2630764 Because I don't have applications for the XT30 and the JST-SH Servo Plug, I removed these and added a T plug instead. Also added…
- Pobrania
- 32
- Polubienia
- 3
- Ocena
- 0
P
PrintablesPeter Broeders
Hobbyking ZD Racing Pirates2 TC-8 DIFF LOCKER
Hobbyking ZD Racing Pirates2 TC-8 DIFF LOCKER use this in your rear diff for some serious Drifting Print instructions Infill: 100%
- Pobrania
- 30
- Polubienia
- 0
- Ocena
- 0
P
PrintablesPeter Broeders
Bloody Mudguard - Bloody Fender - Bloederige Spatlap (for my Decathlon Elops 920 EBike)
print it upside down for the best result **update 24/05/2022** : added a version with teeth…
- Pobrania
- 29
- Polubienia
- 2
- Ocena
- 0
P
PrintablesPeter Broeders
Flat Cable Clip (PI Camera) for locking ring
Remix of the cable clip for locking ring by Fruitycakes: https://www.thingiverse.com/thing:3347560 For the Flexible webcam mount for Octolapse of Teaching Tech ( https://www.thingiverse.com/thing:3223979 ) , I found nothing to attach a…
- Pobrania
- 28
- Polubienia
- 5
- Ocena
- 0
P
PrintablesPeter Broeders
Slicer Bed Model of Velleman Vertex K8800
Bed Model to use with Simplify3D, PrusaSlicer... Category: 3D Printing
- Pobrania
- 28
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPeter Broeders
BSR Berserker (HobbyKing) Wing
this is my 1st attempt, for designing a wing for a Hobbyking Berserker, actually it's my 1st wing ever :) best print this with the sides of the wing as base, see simplify3D snapshot and glue the pieces together full wing is also provided…
- Pobrania
- 27
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPeter Broeders
Hobbyking Desert Fox Front and Back Skids (Extended Version)
Front and Back Extended Skids for the Hobbyking Desert Fox You'll need some longer screws. Front Skid is al littlebit bend (5°) Enjoy!
- Pobrania
- 26
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPeter Broeders
ABSIMA ASB1BL Front or Rear Skid
ABSIMA ASB1BL SAND BUGGY Front or Rear Skid also fits for these cars: T2M Pirate Sniper DF-Models Dune Fighter BSD Racing Prime Desert Assault MODSTER DUNE RACER could also fit for Redcat Racing Blackout...? enjoy!
- Pobrania
- 25
- Polubienia
- 0
- Ocena
- 0
P
PrintablesPeter Broeders
BSR SABERTOOTH SKIDS and BUMPER ( Hobbyking )
I recently got a Basher Sabertooth on sale, but couldn't find any thngi's, so I made some ;) BSR SABERTOOTH SKIDS and BUMPER ( Hobbyking ) MID SKID V2 added, shape modified 60% infill, with supports Enjoy ;) Print instructions 60% infill,…
- Pobrania
- 25
- Polubienia
- 0
- Ocena
- 0
P
PrintablesPeter Broeders
BSR BERSERKER SKIDS (MID AND REAR)
Skid plates for the HOBBYKING BSR BERSERKER, could also fit the HSP SEAROVER
- Pobrania
- 24
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPeter Broeders
BSR SABERTOOTH WHEELIE BAR ( Hobbyking )
I recently got a Basher Sabertooth on sale, but couldn't find any thngi's, so I made some ;) BSR SABERTOOTH Wheelie Bar ( Hobbyking ) Wheelie Bar 60% infill, with supports Wheels 90% infill, no supports (you can choose a small or big…
- Pobrania
- 24
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPeter Broeders
ECX Revenge Front Bumper with Skid
ECX Revenge Front Bumper with Skid enjoy!
- Pobrania
- 23
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPeter Broeders
ECX Revenge Shock Protector
ECX Revenge Shock Protector Enjoy!
- Pobrania
- 23
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPeter Broeders
Hobbyking ZD Racing Pirates2 TC-8 SKIDS (front, mid & rear)
These are skids for the Hobbyking ZD Racing Pirates2 TC-8 1/8 scale touring car. the following cars are identical: DFModels Street Racer PRO Modster Tayphoon You'll need some longer screws. enjoy ;)
- Pobrania
- 22
- Polubienia
- 0
- Ocena
- 0
P
PrintablesPeter Broeders
Hasselt Huisnummer Houder - Address Number Holder
In my hometown Hasselt they introduced new address numbers. This is a holder for this number. Note: for mounting the lid you'll need M2 bolts More info: https://www.vvsnv.be/hasselt-reflecterende-huisnummers/…
- Pobrania
- 22
- Polubienia
- 3
- Ocena
- 0
P
PrintablesPeter Broeders
BSR BERSERKER MUDGUARDS (HOBBYKING)
BSR BERSERKER MUDGUARDS (HOBBYKING) maybe it also fits for the HSP SEAROVER? Since there was no way to mount with screws without drilling, I used zip ties. Happy printing!
- Pobrania
- 21
- Polubienia
- 0
- Ocena
- 0
P
PrintablesPeter Broeders
Turnigy 1/16 AWD Buggy Rear Skid and Spur Gear Cover
Turnigy 1/16 AWD Buggy Rear Skid and Spur Gear Cover made this one, because the Spur Gear was open to the elements... Enjoy!
- Pobrania
- 21
- Polubienia
- 3
- Ocena
- 0
P
PrintablesPeter Broeders
BSR SABERTOOTH Mudguards (Hobbyking)
BSR SABERTOOTH Mudguards mount with one screw and two zip ties 10% infill Happy printing!
- Pobrania
- 21
- Polubienia
- 0
- Ocena
- 0
P
PrintablesPeter Broeders
Hobbyking Desert Fox Front and/or Back Skid
Front and/or Back Skid for the Hobbyking Desert Fox You'll need some longer screws. Enjoy! fusion file also added Print instructions Print Settings Supports: No Infill: 90%
- Pobrania
- 20
- Polubienia
- 0
- Ocena
- 0
P
PrintablesPeter Broeders
ECX Revenge Skids (Front, Mid and Rear)
ECX Revenge Skids (Front, Mid and Rear) Enjoy! Print instructions Infill: 90%
- Pobrania
- 20
- Polubienia
- 0
- Ocena
- 0
P
PrintablesPeter Broeders
BSR Berserker Motor Mount & Adjustor
Motor Mount for the Hobbyking BSR BERSERKER I made this one on request, because spare parts are always on backorder @ Hobbyking... ;) Print this one with a very strong plastic. And a plastic that can withstand high temperatures. If there…
- Pobrania
- 19
- Polubienia
- 0
- Ocena
- 0
P
PrintablesPeter Broeders
Endoscope Mount for Vertex Delta K8800
Endoscope mount for Vertex Delta K8800 endoscope used = cheap 7mm diameter endoscope (AliExpress) => but diameter has a lot of tolerance, so I added the Fusion file, so you can modify the diameter to your needs... Enjoy! Print Settings…
- Pobrania
- 10
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPeter Broeders
Neues Reglergehäuse für Heizregler Velleman K8800 by StoniXX (remix)
I do like all the designs of StoniXX for the Vertex Delta K8800 This is not a real remix, but more of an add on... My mosfet heatsink was somewhat bigger, and couldn't fit it in the housing. So I made this, it's an extension of the…
- Pobrania
- 10
- Polubienia
- 0
- Ocena
- 0
To wszystkie aktualnie dostępne wyniki.