103 modeli
The model is rather simple: two hollow cones stacked. By adding organic supports and stopping the print early, an interesting abstract art piece is created. I used rainbow filament to highlight the print's features. Important: the entire…
Wydruk około 30,83 €–37,68 € nettoWstępna wycena jednego wariantu
The normal size hasa 160mm internal (max roll size) and 32mm post diameter (max hole size). A new jumbo version has a 180mm internal and 38mm post diameter to accommodate larger rolls. After adding the towel roll with the end free,…
Now includes a version for the Bambu CMYK Backlight Board and frame. Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture…
Enjoy the mesmerizing spinning journey of coins as they make their way into the bottom of this hyperboloid coin bank. The ramp simply snaps snuggly onto the vortex rim. Lay a coin flat at the top of the ramp, release and enjoy. Prints…
Holds two rolls of standard cellophane tape (aka Scotch tape) in an oversized or near 1:1 retro cassette. Side opening help keep track of how much is left on the primary and spare rolls. Print in your favorite colors and customize the…
A treehouse nestled in two trees. Is it a child's current favorite getaway, or a long forgotten memory. Either is possible by controlling how much support is created. Printing: Enable organic supports to build the trees and branches reach…
Add a filament swap for the details to add contrast.
Remixed from andrethomas' bracket. Rounded the back corner and adjusted the holes to fit course drywall screws. Now includes 105, 125, 150 and 175mm versions.
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
Can be printed in a single color, but works best with multiple colors. I used two filament swaps to print the back plate, traces and letter in different filaments. Tip: when slicing, PrusaSlicer should detect the model is a sign or logo…
Ethernet cable clips and cover for routing along walls. Uses standard course drywall, #5 or similar screws. Versions for one through four cables are included. The cover was intended for routing the cables through a wall near a corner. One…
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
Letter vary in height and width from about 65mm to 80mm and are 20mm thick. They can of course be scaled to the required size. For a nicer front finish, try flipping the letters face down if you have a smooth or textured build plate.…
Replacement Macintosh Floppy Eject Gear. The gear in the internal 800k floppy drive on my Macintosh SE fell to pieces so I made a new one. This was modeled from a photo what was left. I didn't have a resin printer at the time, so I used a…
Print the solid model without supports. The cutout version will require supports and a project (.3mf) file is included to help. I have found the organic supports work the best for me with this model. No support is required for the…
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
Now includes a version for the Bambu CMYK Backlight Board and frame. Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture…
Updates: Original files updated to remove some very small geometry to hopefully improve printing and avoid errors in Bambu Studio. In addition, a new alternative version is included with thicker lines to further simplify the model at the…
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
Print using spiral vase enabled. I used 0.20mm layer height with 4 bottom layers for added support. Try other layer settings to experiment. This may also work well in a flexible filament, but haven't tried just yet.
Needed a curtain rod holder my kids couldn't bend, so this is what I cam up with. Fits two 5/8" rods that should snap into place. The rods are 34mm center to center with the first 80mm from the wall.
Quote from The Hitchhiker's Guide to the Galaxy. The main model has stacked letters and is easiest to print with a dual extruder or MMU. The simplified version allows dual color with a single filament swap.
Print as-is, scale up a bit for a coaster perhaps, or use in another project. Can be easily set for multi color printing with the Multimaterial painting tool in PrusaSlicer, just be sure to use the Smart fill tool.
Four styles of teardrop shaped Christmas tree ornaments. Print in your favorite silk PLA (dual color works well) to add some shine. Print on the top end (upside down) with a brim to add stability. Once printed, tie a 160mm length of…
Enable organic supports to build intertwined trees of hearts. Project file and screenshot included with my support settings, but feel free to experiment to see what gets created.
Now includes a version for the Bambu CMYK Backlight Board and frame. Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture…
Note: If you download the original model without side cutouts for the part fan wire, please replace with the latest STL. This has been updated to correct the part fan hole locations which were too low my 2mm. I also reinforced the lower…
Remix of JGMaker Magic's fan silencer. I removed the center hole, rounded some edges and added an additional baffle. JGMaker's design seems quieter than others I have tried so far. Print "Ender 3 Pro PSU Silencer v2.stl" for the Ender 3…
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
Remixed from timqui's cover to replace the large rounded edges with chamfers for a much cleaner print and a version without the central hole. This style does not make the fan silent, but does seem to reduce some frequencies enough to make…
This tissue box has vertical slots that provide their own aesthetic, but also allow various decorative pieces or attachments to be snapped in. Change up the box's looks when desired without reprinting the box. Add a smaller box to the…
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
Nintendo Entertainment System console patent drawing art. Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on…
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
Now includes a version for the Bambu CMYK Backlight Board and frame. Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture…
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
Just a stand for Martin's awesome Stargate model to hold it upright. Designed to print without supports. There are two variations with v2 using two tabs on the front edge to minimize blocking details.
Shortened version of my previous Ender 7 hotend cover. This makes the nozzle more visible and reduces weight a bit. The pass-through opening for the left part cooling fan is no longer a slot to improve rigidity (I have added connectors to…
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
Now includes a version for the Bambu CMYK Backlight Board and frame. Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture…
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
This replaces the smooth pulleys where the belt teeth instead of the smooth back run against them. Motion is smoother and quieter than before with these. I couldn't find a commercial with the right dimensions, so I made my own. I printed…
Press fit a small 5x2mm magnet into the top slot in the balloon. The fit should be tight and not require any glue. A small hole in the balloon's bottom provides a place to tie the string. This only replaces the little man and cow models…
This ring holder captures the essence of nostalgia, making it a must-have for any gaming enthusiast. But this ring holder doesn't stop at aesthetics alone. Inside the joystick replica, you'll discover a cleverly concealed storage…
A basic house for little squishy animal toys. Each of the fifteen cubbies are 35mm square and 42mm deep. Some attic space provides room for longer squishies or accessories. This could also be used as a display shelf for small items. I…
Slight redesign of Undo_Ender_7s great cable holder to allow printing without supports. Attaches to the top hub PCB using the existing screws. I added a zip tie to further secure the cable loom. Perhaps I may add some notching or slots to…
A sharpie holder mounting with double sided tape or a command strip. I try to mark my furnace filters with the date installed and wanted to keep a sharpie close. The mount provides enough grip to securely hold the sharpie vertically or…
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
Printed with a single extruder using the method outlined in a video on the CHEP Youtube channel found here . This method easy once you understand it and work out the details. It also results in a very nice surface. Note that the model is…
Use a color swap for the line work to add contrast. The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture in. A thin version at 2mm total thickness is included to reduce material and print…
Now includes a version for the Bambu CMYK Backlight Board and frame. Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture…
The beads simply snap onto the wheel spokes and make a clanking noise at lows speeds while also adding some color. Due to the small surface area, these are best printed with a brim to provide better bed adhesion. Just remember to remove…
Now includes a version for the Bambu CMYK Backlight Board and frame. Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture…
Feet / legs for 2020 extrusions. These are 64mm high and 20mm square. Each foot only requires a single M4 bolt and t nut to attach.
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
Remix of SpectreGadget's brilliant AMS riser. This adds a rim / lip to the front edge to fully capture the glass top and prevent it from sliding forward without lifting it up. I found that sometimes the glass would sometimes move forward…
Nintendo Entertainment System zapper patent drawing art. Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a…
Now includes a version for the Bambu CMYK Backlight Board and frame. Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture…
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
Now includes a version for the Bambu CMYK Backlight Board and frame. Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture…
Now includes a version for the Bambu CMYK Backlight Board and frame. Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture…
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
Do not insert this printed template itself into a drive. While it may work out OK, I'm not sure how the printed surface or any defects would affect the head and other internals. Template to mark and cut transport cards for the Commodore…
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
Now includes a version for the Bambu CMYK Backlight Board and frame. Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture…
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
Each decoration is printed in two parts that easily snap together. Print in glow in the dark filament to keep these visible throughout the night. Once each part is printed, assemble by inserting the triangular pin of the decorative piece…
Use a color swap for the line work to add contrast. The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture in. A thin version at 2mm total thickness is included to reduce material and print…
My telescope's equatorial mount was missing one of its slow motion cables, so I made knob to take its place. Fits a standard 6mm shaft and it fixed with a small bolt or grub screw into the side 3.5mm hole.
Can print printed wall decoration, coaster, keychain or used in another design. Add a filament swap at the start of the raised areas to add contrast.
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
Now includes a version for the Bambu CMYK Backlight Board and frame. Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture…
A simple potentiometer knob I needed to fit a in a small space. Print without supports, with the hole facing down.
Now includes a version for the Bambu CMYK Backlight Board and frame. Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture…
Lower hinge for Kidco baby gate. The original part broke from my toddler climbing the gate. This printed replacement outlasted the original and our need for the gate. Print with a large number of perimeter layers and high infill for…
Replace the original membrane keyboard with the far more functional mechanical keyboard by iNimbleSloth and my addition of a replacement case and keycaps. The case and keycaps attempt to capture the overall feel of the original ZX81,…
Now includes a version for the Bambu CMYK Backlight Board and frame. Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture…
Video card bracket remixed from Phreeze's model to fit an old ISA video card (Oak OTI077 if I recall). Adjusted the port location with the center of the bottom mounting hole about 44mm from the bottom.
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
Now includes a version for the Bambu CMYK Backlight Board and frame. Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture…
Use a color swap for the line work to add contrast. The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture in. A thin version at 2mm total thickness is included to reduce material and print…
I like to keep my original Game Boy DMG-01 on display and ready to play, but found the existing stands a bit too bulky. This stands effectively holds the Game Boy on your desk or shelf while not obscuring its design. A small pin in the…
Now includes a version for the Bambu CMYK Backlight Board and frame. Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture…
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
Power cord wrap hooks that can be screwed to the wall or tool stand. Overall part size is 25.4 x 63.5 x12.5mm (1 x 2.5 x 0.6 inches) but could be scaled as needed.
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
Now includes a version for the Bambu CMYK Backlight Board and frame. Use a color swap for the line work to add contrast. A black background with white / grey foreground would give a classic look, but experiment with different…
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
Now includes a version for the Bambu CMYK Backlight Board and frame. Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture…
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
