Liczymy pasujące modele…
These adapters are made for the DEWALT DWE7492 Table saw adapter : - ID 35mm for shop vac - Port for 31.5mm ID hose to riving knife Riving knife adapter : - Tapered that goes inside the riving knife - Port for 31.5mm ID hose Fusion 360…
For MacBook Pro 14 inches 2023, 96W USB‐C - MagSafe power adapter Added versions : 61w - 67w - 70w - 140w
Wall mount for DeWalt DCG405 and DCG406 angle grinder. On this grinder the guard is 35mm thick, and it's really close to the body and the handle. The mount is designed with two slots (left and right) to give some space for the handle. It…
Want to have spare parts without waiting for shipping ? This is the front shock absorber mounting plate for the wltoys 124008. I print it with carbon fiber nylon. Probably stronger than the original part if used with longer bolts. It…
My Ooni Fyra 12 has one of the feet that deteriorates. The rubber foot keeps going into the “leg” which means that the oven is no longer level. I design this foot to the same dimensions as the original one. I print this foot in TPU and it…
These clips are made for the DEWALT DWE7492 These clips allow you to hold and remove the tablesaw when it's needed. No need to unscrew it, just grab it and move. I recommend you to print it with the " U " face against the bed. My table…
Store your Beeline Moto 2 under your motorcycle seat when not in use. I included multiple logo .stl with various offsets (from 0.1 mm to 0.4mm) Fusion 360 file included if you want to adjust the thread tolerance or anything else.
Drill guide to drill holes at 90deg. Fits my Dewalt DCD995, and probably DCD996. If your drill comes with a clamped handle (48.5mm diameter clamp) It needs 3 rods (8mm diameter and approx 20-25cm long) and a 5mm bolt to clamp the ‘drill…
Tripod designed to support a tree in my house. I use 25mm wooden dowels. The hole is 25.4mm for clearance so a 1inch dowel can fit. Category: Household
My Robomow RC304 has traction issues in one big slope. I tried the official Robomow Grips with official larger wheels but it was not satisfying enough. Those parts are not cheap and do not last long enough for me. I tried also other…
This print is a tool to remove lug nut caps that are inside a tight hole. I print these lug nut caps for my Tesla Model Y with Gemini wheels. Due to the wheels geometry, the space between the caps and the wheel is too tight to insert…
Pulley that can be screwed on flat surface, 8mm shaft needed (I use an aluminium shaft). The pulley is made for an 6/7mm rope or smaller. For the “winch”: I use 3 skateboard “608” bearings, 8mm threaded rod and nuts, and a piece of iron…
Flexible link to attach the alarm remote to the key ring. Fits Cobra Car Alarm Remote 7777 Fob/Key Case https://alarmescobra.com/loja/en/acessories/13-cobra-7777-remote-replacement-case.html Printed in TPU 53D (infill the parts with lots…
This design is inspired by Brogue Motorcycle : https://broguemotorcycles.com/products/brogue-triumph-modern-classic-helmet-hook-lock-2016-triumph-speed-twin-thruxton-r-rs-bonneville-t100-t Print it on the edge (see slicer picture), and…
This is a magnetic bitholder similar to the one that comes with the Dewalt battery drill/impact. This one is a bit longer to gather way more drills and bits than the original It needs four 12x3mm or four 10x3mm neodymium magnets (two on…
Stand bobbin designed for a allen head screw (M10x40mm or M8x40mm or M6x40mm) Two designs are provided for each size, one with integrated support to print on an angle and one to print vertically. I have printed mine on an angle, with a…
I bought a food dehydrator at Lidl (their Silvercrest brand) that is blowing in the center of the spool, so I need an horizontal spool holder which allows air to pass through. Thanks to @amoose136 for providing the fusion360 file of his…
Key cover to easily identify your keys. Print in TPU with 0.6mm walls (designed with 0.6mm shell) The cover must be stretched to be inserted, so TPU is a must.
Horizontal/cylindrical food dehydrator extension (Lidl SilverCrest). 28.5cm of diameter The extension is cut into quarter (so you need to print 4 of them). I assemble mine with CA glue and high temp aluminium tape. I added butterfly…
When installing a rain collector, I had to cut the gutter. To make the cut piece of gutter more secure, I designed this downspout collar. The diameter of the gutter is 100mm. I print mine in PET-G and add some 6mm stainless steel…
Create your own shelves in your Biohort Europa garden shed. Despite the hooks being 3D printed, it can withstand quite some load. I printed mine in ASA, avoid PLA if the shed is in the sun. Spacing between rails : 71.7 cm (there is some…
This Dewalt trimmer is a great tool, but the balance is off. It is very nose heavy, making it awkward and tiring to use... This small design clamp itself tightly on the main shaft with two M4 screws. Insert a small carabiner into the…
Socket for Andreani Misano EVO2 fork cartridge top cap, similar to this one : https://andreaniusa.com/product/andreaniandreani-tools1130-30/ No need to over tighten the cap tool as the top triple clamp will clamp it tight. A 3D printed…
Heart-shaped necklace that contains an airtag. Perfect for a child doll, teddy bear, cuddly toy, comforter, doudou, … In two parts that are screwed together (I use small hard drive screws) or glued (I tried, it works fine) Fusion 360 file…
For the Jura E8 coffee machine and probably others from the E serie. This funnel allows you to add ground coffee without spilling it everywhere. I print it in ASA so it is dish washer compatible.
Main door closing hook for Schweizer mailbox. https://www.ernstschweizer.ch/fr/produits-competences/boites-lettres-boites-colis/ Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: No Supports: Yes Resolution: .12 Infill:…
The outer plastic shell of our Bodum knife block has become tacky/sticky over time. This is the model of the outer shell only, take out the inside "brush" of the Bodum knife block and insert it in this shell. You can also reuse the Bodum…
The retaining clip of my S2 Lotus side repeater lamp broke off. I didn't want to wait or to pay more in shipping than the price of this repeater. So, I design this clip that slides over the broken one and that is hold in place by the bulb…
For Lotus Elise / Exige 2004-2005 maybe later Cable throttle Can replace part number 32 on schema : Buffer, throttle pedal downstop (for a 13mm hex bolt) Printed with TPU 53D Print Settings Printer Brand: Creality Printer: Ender 3 Infill:…
The hook is for this compost bin : https://www.juwel.com/en/compost-bins/bio-600 I bought mine at Aldi. It is also available at Hornbach, .. Hints for printing: Print with a lot a walls. The first one I print was in ABS, it broke after 6…
Handle for my Turbopelle ^^, an electric snow shovel build by Sonneck ( https://sonneck.com/akku-schneefraesen ) . This handle is bigger and stronger than the original one. Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts:…
We have a christmas tree stand "Baum Fix aqua" (bought at Landi Switzerland) that uses 4 spring to maintain open the pieces that grab the tree. All 4 springs supports are broken. Without these pieces open, it is a pain to install the…
The piece on which the glass platter is screwed broke. After failed attempts of gluing it back together with superglue I designed this replacement part. To install it, you must unscrew all the bolts under the scale, 4 are hidden under the…
This design is a wrench to remove the top fork cap on a Triumph Speed Twin 1200 (2021-2024) with the upside down Marzocchi fork. After unscrewing the top triple clamp bolt, the fork cap is easy to unscrew. A 3D printed wrench works fine.…
This design replaces the removable chip tray of this Kangaro DP520 paper punch : https://kangarokgoc.com/Home/ProductDetails?ID=40&CATID=2&CatName=Paper%20Punches I print it in hard TPU ( shore 53D), softer TPU will be fine too. Add…
This is kind of a niche item :) In the instructions, Powerflex explicitly mention : “Ensure that suitable adapters or pressing tools are used and that any force is applied to the bush face and not on the bonded metal bracket.” →…
Fork vise jaws for Marzocchi upside down fork as fitted on Triumph Speed Twin 1200 (2021-2024) 2 holes : one vertical, the other at an angle of 20 degrees. 53mm upper tube You can use 6 10x3mm magnets.
My daughter lost the original ski rack for the Playmobil cable car. This is not a copy of the original Playmobil part, it is my own design, perhaps not quite as good... It clips (firmly) on the cable car. I printed mine upside down…
Nespresso metal cup lid can be useful to store your coffee capsules inside the cup, to avoid spills and to store your cup inside your bag without stains... It is designed for the espresso size cup. Fusion file included if you want to edit…
My daughter wanted to play with crutches... I use 20mm hardwood sticks, about 1 meter long for each crutch. The middle section must be printed with thick walls and dense infill. I used 5 walls and 35% infill. Rotate the middle section as…
To wszystkie aktualnie dostępne wyniki.
