Liczymy pasujące modele…
If you want to add option to your CORE One (+ and L too) Advanced Filtration unit to easily take it off, this model will be right for you. I wanted to have something to quickly and easily remove the filter, so I remixed the version for…
Ice Skate with hook. I remixed this model so the blade is printed alone, that means less supports, easy to print blade in different colour. To assemble skate and blade is not easy, but it is not needed to glue it, just put it in and it…
This model was created/remixed to add the option for Storz holder, which can be used for variant B and C. I recommend to print it in PETG with supports (for the screw holes).
Broom holder with 3 screws for handles 16-23mm
Just corrected version of Silica gel container for COREBOXX, where the original version is not fitting, maybe due to changes to gen2 panels.
Printed with PLA, 0.2mm, on side with support
I created very slightly changed version of Crossbeam to be able to be used with 20mm tubes, which are used in (Un)Original Prusa Drybox.
To be sure, that some spool will not damage the main PCB of the SEMI-Smart addon, I have created this cover and also added space for four zip ties on it, so you can organize cables better. For now it is only prepared, waiting for the PCB…
Modified BOSCH 18V Battery holder for mounting on the pegboard of various manufacturers - MARS Svratka, Küpper, ...
To go further with isolating the printer in Original Prusa Enclosure I wanted to make sure, that all possible “leaks” are sealed. These prints can also help to make it sealed. Printed with PLA Black 0.2mm STRUCTURAL with 0.4mm Nozzle.
Modified BOSCH Tool holder for mounting on the pegboard of various manufacturers - MARS Svratka, Küpper, ...
Tennis trophy with easy to print solution - just to slice it, add colours and that's it :-) I would suggest to cut the racket in two parts (front/back), so it will print without any supports. Only support is needed for the racket hole.…
I always wanted to have some box on the printer (when I got MMU3), but my printer is in a room, where is not so much light, so I wanted to add lights over filaments in the box and also to have any light in the box. Together with COREBOXX…
TAPO C200 mount for Original Prusa Enclosure. I created left and right option. I added also version “classic”, which mean just the place for mouting the holder for camera with original holder. AIO version, which means, that you need only…
These hooks were made for holding christmas lights, but others may find same/other use for them. I have created six different variations. Straight angle, angle 85°, left/right angle for ascent/descent places to keep hook still upright…
I have remixed the passthrough to match exactly this mod https://www.printables.com/cs/model/723954-unoriginal-drybox-bottom-seal-with-ptfe-passtrough .
This phone holder is for pegboard of various models (MARS Svratka, Küpper…). It was created for Samsung Galaxy S23 Ultra and the inner dimensions are 82x12.7mm.
I was using TAPO C200 for a long time with my previous MK4S printer, so I wanted to continue using it, but it was too big to fit into the CORE One, so I did some changes to it. I got rid of all motors, speaker and leave just the important…
During COREBOXX installation on my CORE One I wanted to have better “PTFE management” towards MMU3, so I needed also for 3 and 2 PTFE comb together. I will add photos from COREBOXX later, when I will start doing changes together with…
I wanted to put MMU3 on my CORE One and I used model from dancan13f , but because of my space I needed the MMU3 to have the input PTFE tubes from top, so I have created opposite angle, than is the original. You need to print at least the…
I created very quick and simple solution to be able to put PSU under the Enclosure, so I made the feet brackets higher (+40mm). If you want to “seal” and safer pass through for cables, you can use my other model…
This xLCD holders are made from revision R2, so it is compatible with xLCD cover R2. I used it also with my xLCD cover R3 and it was tight, but possible to assemble. You can choose to use the closer or farther hole to mount it on your…
Simple cover for l-shaped profiles. Dimensions are made for L profile with one side 30mm and other side 40mm. Width 52.6mm. Depth is 7.6mm, which was enough for 2.4mm thick material + 4.4mm screw head and space for tape. These were…
I found out, that some knives are too long and the surface under it was damaged, because of that. I wanted to stop that, so I created bottom cover. It is not cover for 100% of the bottom surface, I did not want it to be easily seen, when…
I did not have enough space behind my printer. I was able to make room under the Enclosure. So together with higher feets that I have, I also added holder for PSU. Now when I need to take my printer out, I just need to disconnect power…
Modified version of middle foot in addition to my other model of feet brackets, that can allow PSU to be under the Prusa Enclosure. To mount it on the Enclosure you need to use some doublesided tape. Due to license conflict, I was not…
Prevent of floor corner getting damaged by vacuum or something else. Printer with 0.4 nozzle, transparent PLA, 0.2mm layer, no supports needed. I printed that on my MK4S without issues, but maybe for someone could be better/needed to use…
To wszystkie aktualnie dostępne wyniki.
