Liczymy pasujące modele…
Honeycomb shaped organizer Outer dimensions: width: 169mm depth: 152.5mm height: 102mm Max object size: Round: up to 47mm diameter flat: up to 52mm width (spatula…) Wall thickness: 2.5mm Featured in Prusa's Weekly Prints #54
These jigs should help drilling holes in aluminium profiles that line up with taped ends of other profiles. Designed for 6mm groove profiles. The 66, 70 and 86mm dimensions were especially made for the Muldex 3D printer design from John…
I was inspired by the " Dental guard box " by KeepTheBOX , however I wanted a few changes so I redesigned one from scratch. Main differences: This one is smaller, has shorter bridges in the hinge, no filet on the underside, thicker…
A small cover for the wiring terminals of the Meanwell RSP-320 power supply. Edit 08-2022: Thanks nosstromOS for confirming the compatibility with the LRS-200 power supply. Thanks Keith Chong for confirming the compatibility with the…
Switch dimensions: 94mm width 26mm height without the feet mounting holes: 6.5mm diameter 35mm center distance
clips into place doesn't need any preloaded nut uses the original 150mm ribbon cable from the camera module needs 4 x M2 screws (5 to 10mm long) to attach the camera My camera module is rev 1.3. I used leftover M2 screws from my LDO Voron…
I designed this holder for my electric car's charge cable, so that the plug doesn't lie on the ground. It's 120mm wide. The mounting holes are 5.5mm diameter so M4 or M5 screws should fit. Print instructions It prints without support.
Prints flat Use it in the orientation you like.
This is a remix from Ducky Organizer by CaseyJohnson. https://www.thingiverse.com/thing:3086612 I separated the beak and the eyes to print it in multicolor mode. I also extended both holes deeper.
This is a filament run-out sensor designed to be inserted on a reverse bowden setup (on the feed-in tube to the extruder). I designed it for my Muldex 3D printer. Details about the printer: https://github.com/3dprintingworld/MULDEX Edit:…
This is a narrow extension for the original Dyson crevice tool. I printed it in TPU, but stiffer materials should be OK too.
Replacement handle for Ikea Annons cooking pot. The design is flat to be easily printed, unlike the original one. The original screw is used. Print instructions Licence: Creative Commons - Attribution - Non-Commercial Category: Kitchen &…
Florabest (Lidl) FRTA 20 grass trimmer blade
The original propeller of my wind vane broke. I designed this one as a replacement. It uses a 608 bearing so it can be attached by a m8 screw. Print instructions The print should be paused at 13.4mm to embed a 608 bearing. It needs a…
The handle of one of my ceramic knife broke. I designed this one to replace it. You may want to print the "imprint" first to check if it fits your knife blade. I set a print pause at 8mm to embed the blade. Take care about the handle…
School accessory to teach numbers
electrolux kitchen stove knob
I couldn't get other bearing cover models to stay in place for long despite a few scaling attempts, so I decided to try a different design. The outer diameter is slightly oversized to be tight against the wheel hub. The overhang shape…
A rear bumper wear protection plate for the Onewheel XR. I printed it standing with a brim. I use the 21.8mm screws which came with the bumpers.
My freezer is a Brandt BFU4425SW. The original handle broke so I designed and printed this replacement. Print instructions Licence: Creative Commons - Attribution Category: Replacement Parts Print Settings Printer Brand: Prusa Printer: I3…
I was inspired by Dugacki's TPU belt , but designed this one from scratch. I've been wearing it for years, so I know it's strong enough. I printed the buckle out of PLA. Print the TPU belt slowly to avoid bulges. The sizes are as such: S:…
A remix of the bag clip model from Andrei, used to hold the blanket or duvet in a bed. Changes made to the original model: scaled to 150% a hole to secure the clamp with a flat head screw up to 5.5mm diameter another hole for screwdriver…
This adapter aims at fixing a E27 lamp socket on a spherical lamp shade that came without it.
Adjustment knob for Ducati / Showa front fork. It needs an m3 nut and a m3x8 chc screw to be held in place. Print instructions Licence: Creative Commons - Attribution - Non-Commercial Category: Automotive Print Settings Printer Brand:…
This is intended to replace the original battery lid on a LG 6710CMAQ05F remote control, which came with a LG hifi audio setup. Print instructions The overhangs are so small that they don't require support.
I designed some cable ducts to arrange the wiring of my Muldex 3D printer. Dimensions: W28mm x H36mm with the cover The vertical and horizontal parts have cutouts for the Duet 2 + Duex 5 boards wiring, but I also share a “blank” 100mm…
I recommend “snug” or “organic” supports for the groove. They are quick to print and save material over the “grid” option.
The original part cooling fan modules of the Muldex 3D printer work very well, but they protrude from the front of the printer, so it makes it a bit difficult to enclose. Details about the printer:…
I designed this enclosure to print higher temperature materials on my Muldex 3D printer. Details about the printer: https://github.com/3dprintingworld/MULDEX I printed the parts in PETG. The original part cooling fan modules will collide…
I printed most parts in ABS and the spring in PC. Required hardware: 1x M8x124mm threaded rod 3x M8 nuts 1x M8 flat washer 2x 608 bearings 1x marble (mine is around 16mm diameter) 1x M3x12mm CHC screw 2 to 6 3.5mm wood screws (to attach…
Ikea Stefan chair soft foot
To wszystkie aktualnie dostępne wyniki.
