Liczymy pasujące modele…
Remix of @unrepentantgeek's Gridfinity Deep 1x1 Bin. Alternate Sizes (all with 12mm label): 1x2, with a flat bottom as well as a scalloped bottom version for extra storage space. 2x2, with a flat bottom as well as a scalloped bottom…
Full project description and build log is on my site: https://erik.build/kb/Making/Lumon+MDR+Terminal Printed in Overture PLA (White, Black, Matte Navy Blue). I printed the shell in 0.15mm layer height on it's back, with a brim and…
A rather sturdy and secure magnet fridge mount for the original TRMNL eInk Display. I was looking for something a little beefier than the original TRMNL fridge mount (found in their GitHub) which I found to be a little too flexy for my…
This is a simple friction fit privacy cover for the Blink Mini 2 camera. Standard infill / perimeters @ 0.20mm is sufficient. I printed mine in black and white PETG to match the cameras.
Overview This is a complete and safe solution to use a Meanwell LRS-350-24 or Meanwell RSP-320-24 power supply on a Prusa MK3(S)(+)/MK3.9(S)/MK4(S) frame. This can be used either on an otherwise stock Prusa i3 OR the excellent Prusawire…
Gridfinity IFIXIT ESD Tweezers Holder (1x1 base). 6x2mm magnet recesses in the bottom. Printed in PLA with 4 perimeters, supports touching buildplate only, and adaptive cubic 15% infill. I did a filament change to make the text a…
Gridfinity IFIXIT Mako Screwdriver Kit Holder (3x2 base). 6x2mm magnet recesses in the bottom. Printed in PLA with 4 perimeters, supports touching buildplate only, and adaptive cubic 15% infill. I did a filament change to make the text a…
Simple, effective hanger for the NoClogger nozzle unclogged for IKEA SKADIS. Uses the T-Clip mount system. Printed in PETG with 4 perimeters, 20% Gyroid infill, no supports.
MGN15H and MGN15C Linear Rail Carriage Holder for cleaning / maintenance. Features a hole at the end to put a zip tie. Useful for chucking into an ultrasonic cleaner, etc.
Experimental Stealthburner Printhead for Luke's Lab's PIKA Hotend + the bd_pressure board. Hardware Required: 2x PIKA / Bambu hot end mounting screws 2x M2.5 x 6 BHCS 1x bd_pressure kit (with included bushings and wafer head mounting…
An easy retrieval IKEA Skådis bracket for most types of 12 inch calipers (including Mitutoyo 500-193-30). Should fit similar sized generic 12" digital calipers as well.Should fit similar sized generic 12" digital calipers as well. T-Clips…
This is an experimental and untested mount for the Dragon Burner toolhead on the Prusawire 3D Printer. The mount is derived from the Dragon Burner Switchwire mount CAD as well as the Prusawire 2025.B1 CAD. Dragon Burner:…
Gridfinity ENGINEER PZ-57 Screw Pliers Holder. 1x1 base. 6x2mm magnet recesses in the bottom. Printed in PLA with 4 perimeters, supports touching buildplate only, and adaptive cubic 15% infill. I did a filament change to make the text a…
Gridfinity IFIXIT Spudger and Pry Bar Holder (2x1 base). 6x2mm magnet recesses in the bottom. Printed in PLA with 4 perimeters, supports touching buildplate only, and adaptive cubic 15% infill. I did a filament change to make the text a…
Minimalist mount to secure TRMNL to a standard 19" rackmount blank plate. Uses 2x M5 Socket Hardware: 2x M5 x 10mm socket head screws; 2x M5 Nuts (standard M5x0.8mm thread). Designed to perfectly fit the hex grid spacing of THIS specific…
Drawer Divider for the LG LF30H8210S refrigerator. This may fit other models (likely so in the Standard Depth MAX series), but I've only tested it in my fridge. 3mf files included and I sliced it into three sections to fit on my MK4S. I…
Gridfinity ENGINEER PA-14 Wire Stripper Holder. 1x1 base. 6x2mm magnet recesses in the bottom. Printed in PLA with 4 perimeters, supports touching buildplate only, and adaptive cubic 15% infill. I did a filament change to make the text a…
Gridfinity Kynar 30awg Bodge Wire Spool Holder (1x1 base) - Parametric. 6x2mm magnet recesses in the bottom. Printed in PLA with 4 perimeters, supports touching buildplate only, and adaptive cubic 15% infill.
Gridfinity ENGINEER PA-07 Wire Stripper Holder. 1x1 base. 6x2mm magnet recesses in the bottom. Printed in PLA with 4 perimeters, supports touching buildplate only, and adaptive cubic 15% infill. I did a filament change to make the text a…
Overview This is a remix of Telefaksi's work to add a few other options for wire management under the extrusions. I've added: An assembly for the Z motor side (allows for three cables, labeled as Z Motor / USB out / network out). An…
Gridfinity XACTO Gripster Holder (1x1 base). 6x2mm magnet recesses in the bottom. Printed in PLA with 4 perimeters, supports touching buildplate only, and adaptive cubic 15% infill. I did a filament change to make the text a different…
Simple Sleeves to hold 3-5x spare blades for a Milwaukee 2529-20 Subcompact Bandsaw. STEP files included if you would like to tweak for your own usage! Included are labeled sleeves for 8 to 11 TPI, 12 to 16TPI, and 18TPI blades. I printed…
1515 Extrusion 3mm Blind Hole Drilling Jig - both 7.5mm from the end, as well as holes in the middle! Assumes the use of M3x14 BHCS and M3 Hex Nuts to secure the jig in place. Modeled as 15.2mm inside width and 3.2mm diameter holes. Happy…
To wszystkie aktualnie dostępne wyniki.
