40 modeli
These are 90 degree turn with a 10 degree bank hot wheel tracks with joiners. Its input / output are level so there is no drop in this design. The tongues are designed to be push together / pull apart, which is showing to be easier than…
This 180 degree turn with a 45 degree bank hot wheel track with joiner has the ability to be mounted via a m5 x 6.7mm heat set brass insert from McMaster. Its input / output are level so there is no drop in this design. Step files are…
This is a replacement track for the Lionel Ready-to-Play straight train track based on the 2017 Polar Express Lionel Train Set Parts. The track has tack holes to nail it down. Curved Track Leave a comment if there is a configuration you…
(Debuted at #mrrf2018) This 180 degree turn with a 45 degree bank hot wheel track has the ability to be mounted via a m5 x 6.7mm heat set brass insert from McMaster. Its input / output are level so there is no drop in this design. Step…
These are 45 degree turn with a 5 degree bank hot wheel tracks with joiners. Its input / output are level so there is no drop in this design. The tongues are designed to be push together / pull apart, which is showing to be easier than…
This 180 degree turn with a 30 degree bank hot wheel track with joiner has the ability to be mounted via a m5 x 6.7mm heat set brass insert from McMaster. Its input / output are level so there is no drop in this design. Step and Fusion…
(Debuted at #mrrf2018) This will adapt hot wheels track to duplo lego with a +/- 45 degree pivot angle. When this is printed it does take some force to break the hinge loose. This was designed to be able to relatively hold the angle it is…
This is a replacement track for the Lionel Ready-to-Play curved train track based on the 2017 Polar Express Lionel Train Set Parts. More track configurations coming soon. Leave a comment if there is a configuration you might like to see…
Please note this mask project is formally defined as a "Reusable Mask with one time use filters, tested at N95 filter specs". Be aware, to be full NIOSH approved a full mask + filter must be tested together to get the rating. We are…
This 180 degree turn with a 45 degree bank and 40mm drop hot wheel track with joiners has the ability to be mounted via a m5 x 6.7mm heat set brass insert from McMaster. Step files are included if you want to modify the design. (Update:…
(Debuted at #mrrf2018) This 180 degree turn with a 45 degree bank and 40mm drop hot wheel track has the ability to be mounted via a m5 x 6.7mm heat set brass insert from McMaster. Step and fusion 360 files are included if you want to…
This Billy Butcherson tombstone is a replica of the movie original tombstone in the Hocus Pocus movie. If you are looking to be able to make the tombstone with a CNC Router in High Density Polystyrene (R-10 Insulation foam board), you can…
This is a custom railroad crossing train track compatible with the Lionel Ready-to-Play Sets. The railroad crossing train track is based on the 2017 Polar Express Lionel Train Set Parts. A complete set for the railroad crossing setup…
This is a custom railroad bumper train track compatible with the Lionel Ready-to-Play Sets. The railroad bumper train track is based on the 2017 Polar Express Lionel Train Set Parts. A complete set for the railroad bumper setup contains…
This Emily Binx tombstone is a replica of the movie original tombstone in the Hocus Pocus movie. If you are looking to be able to make the tombstone with a CNC Router in High Density Polystyrene (R-10 Insulation foam board), you can find…
Voron Dragon Burner V8 Parts, 6 Toolhead Cat Ear design for a 6 tool 3D printer configuration w/ tool numbers. Remixed for LeeMerie3D shown on their YouTube live stream on 3-8-2025 (…
This is a custom criss-cross train track compatible with the Lionel Ready-to-Play Sets. The criss-cross train track is based on the 2017 Polar Express Lionel Train Set Parts. The track has tack holes to nail it down. A complete set for…
(Debuted at #mrrf2018) This Large Interlocking Block hinge has a +/- 45 degree pivot angle. When this is printed it does take some force to break the hinge loose. This was designed to be able to relatively hold the angle it is set, hence…
This is an adapter for the Creality Ender 3 to mount an E3D V6 Volcano Hotend. This uses the stock hotend fan and cooling fan. Models include both a standard and mirror version. The "..._Back" piece is used on both versions of the mount.…
This is made to form two 12 inch Hot Wheels track to make a quart loop. With three or four of these you can create a full loop depending on how big of a loop you are looking for. If you need a loop base here Print Settings Printer Brand:…
This is a case designed for the D1 Mini esp8266 board and DHT11 sensor. It was designed for the use as a smart sensor for home automation,specifically espHome and Home Assistant. Hardware: D1 Mini ESP8266 Board Digital Temp and Humidity…
The base model is of @NHSE "Hot Wheels on Duplo Blocks" This expanded hot wheels duplo adapter give twin tracks mounted in parallel. This post includes from a 5 wide up to 16 wide models (# of duplo studs). If you need to go beyond 2x16 I…
This is a custom 50mm straight train track compatible with the Lionel Ready-to-Play Sets. The track is based on the 2017 Polar Express Lionel Train Set Parts. The track has a tack hole to nail it down. (Note: This was designed at the…
This is a custom 30mm straight train track compatible with the Lionel Ready-to-Play Sets. The track is based on the 2017 Polar Express Lionel Train Set Parts. The track has a tack hole to nail it down. (Note: This was designed at the…
This is a simple Rotary Guide that fits the $10 Harbor Freight Drill Master (63235). It was designed for people doing extruded polystyrene carving... aka Tombstone carving. Hardware: (Qty 1) M5 x 16mm Cap Screw (Button Head Cap / Phillips…
This is a custom 45mm straight train track compatible with the Lionel Ready-to-Play Sets. The track is based on the 2017 Polar Express Lionel Train Set Parts. The track has a tack hole to nail it down. (Note: This was designed at the…
This is a motion sensor housing originally designed for Halloween decor motions sensors. The mounting holes inside the enclosure are for a custom designed PCB breakout board. The cable seals are sized to pass through cat6 cable. Hardware:…
This is a replacement train car coupler that fits the Playskool Express sets from 1988, 1989, 1990, and 1992. I do have more replacement parts that will be releasing, keep an eye on my posts in the coming months. Category: Toy & Game…
(Debuted at #mrrf2018) This peg board mount was originally designed to mate with a peg board arm to support hot wheels track. This could be used for other uses as long as the model is designed to fit over this mount. Step file is included…
This is a replacement train car coupler mount that fits the Playskool Express sets from 1988, 1989, 1990, and 1992. I do have more replacement parts that will be releasing, keep an eye on my posts in the coming months. Print Settings…
This is a replacement train car wheel that fits the Playskool Express sets from 1988, 1989, 1990, and 1992. You will need a 2.5mm x 48mm stainless steel rod for the axle. I do have more replacement parts that will be releasing, keep an…
This 70mm Dust Boot that was originally designed to fit a Dewalt Router. This will fit a 2.5" shop-vac hose. The skirt is designed to be printed in TPE flexible filament. BOM: Qty 40 - Rare Earth Magnets (5/16 in x 1/8 in) - Amazon…
****This is dealing with AC power and electrical hookups. Please take precautions! We are NOT responsible for any damages as a result of this project.**** This is a 2-Gang Relay Pack Case for High Amp Relay controlled with a D1 mini…
This USB to D-battery adapter was originally designed to be used in the Hot Wheels Booster but can be used on any 3v/4.5v battery configuration (2-3 D-batteries) devices. Parts: Printed Parts DC-DC Buck Converter Adjustable Power Step…
This is a mount that fits a standard Taz gantry carriage for the e3D Hemera. Depending on the version of Taz or Taz Clone you may not have bed leveling so I added the ability to add an 18mm inductive sensor with this mount. Adapter for…
All the printed parts you need to make a Dumb and Dumber Mutt Cutts Van look alike kids wagon. All the parts are designed to be sewn on. Print Settings Notes: Mutt Cutts Sign: The part is intended to be printed in 4 different colors.…
(Debuted at #mrrf2018) This peg board arm was originally designed to mate with a peg board base to support hot wheels track (see my other designs). This could be used for other uses as long as the model is designed to fit over this mount.…
This is a mount for a 1w-3w LED light and lens. It was originally designed for use in my Haunted Mansion face that follows you effect. Parts List... Lens (Qty 2) M3 x 10mm Cap Screws Check out our Wiki for more details on other Halloween…
SAFETY NOTICE: This involved sharp object. Please be careful when handling this item. We take no responsibility for injuries that may occur from using this. Use at your own risk. This tool is designed to cut 1in x 18in Tourniquet rolls in…
This is a desk shelf for clamping light arms and microphone arms. My desk did not have a good mount point for the clamp which I why I designed this. Since this will be something that is clamped on you will want to print this around 50%…
To wszystkie aktualnie dostępne wyniki.
