1 / 3
Hot Wheel Track 180 deg Turn, 30 deg Bank w/ Joiner (Redesign) — zdjęcie 1
1 / 3

Hot Wheel Track 180 deg Turn, 30 deg Bank w/ Joiner (Redesign)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This 180 degree turn with a 30 degree bank hot wheel track with joiner has the ability to be mounted via a m5 x 6.7mm…

Ocena
0 / 5
Polubienia
29
Pobrania
185
Wydruki
1
Wyświetlenia
455
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution — Noncommercial

This 180 degree turn with a 30 degree bank hot wheel track with joiner has the ability to be mounted via a m5 x 6.7mm heat set brass insert from McMaster. Its input / output are level so there is no drop in this design.

Step and Fusion 360 files are included if you want to modify the design. (Update: 2024-11-18, Removed Step and Fusion files due to online sellers using the designs to sell on platforms like Etsy. Sorry to future visitors of this page. Sharing any models going forward will be rare and sparse due to these abuses.)

M86toys.com Listing here

Etsy Listing here

Listings are modern versions of this design and resin cast parts from SLA printed masters

I have also included a split model so that smaller platform printers can print the part in 2 pieces. The split design can be joined by using two McMaster m3 heat set brass inserts and 2 m3x20 cap screws.

Updates:

20190426: Posted an updated design where the ends are solid and similar to the 45's and 90's curves.

Print Settings

Printer:

Lulzbot Taz 4 Clone

Rafts: 

No

**Supports:**

Yes

Resolution: 

0.2mm

**Infill:**

50%


 

Notes: 

I am printing these with a 0.8mm nozzle at 0.2mm layer height. Make sure you add some vertical lift with these parts. I use 1mm vert lift due to some curling you might experience with ABS.

 

 

 

Category: Toy & Game Accessories

Tagi