1 / 3
Hot Wheel Track 180 deg Turn, 30 deg Bank w/ Joiner (Redesign) — image 1
1 / 3

Hot Wheel Track 180 deg Turn, 30 deg Bank w/ Joiner (Redesign)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This 180 degree turn with a 30 degree bank hot wheel track with joiner has the ability to be mounted via a m5 x 6.7mm…

Rating
0 / 5
Likes
29
Downloads
185
Makes
1
Views
454
Reviews
0

Updated at source:

Model information

Category
Outdoor Toys
License
Creative Commons — Attribution — Noncommercial

This 180 degree turn with a 30 degree bank hot wheel track with joiner has the ability to be mounted via a m5 x 6.7mm heat set brass insert from McMaster. Its input / output are level so there is no drop in this design.

Step and Fusion 360 files are included if you want to modify the design. (Update: 2024-11-18, Removed Step and Fusion files due to online sellers using the designs to sell on platforms like Etsy. Sorry to future visitors of this page. Sharing any models going forward will be rare and sparse due to these abuses.)

M86toys.com Listing here

Etsy Listing here

Listings are modern versions of this design and resin cast parts from SLA printed masters

I have also included a split model so that smaller platform printers can print the part in 2 pieces. The split design can be joined by using two McMaster m3 heat set brass inserts and 2 m3x20 cap screws.

Updates:

20190426: Posted an updated design where the ends are solid and similar to the 45's and 90's curves.

Print Settings

Printer:

Lulzbot Taz 4 Clone

Rafts: 

No

**Supports:**

Yes

Resolution: 

0.2mm

**Infill:**

50%


 

Notes: 

I am printing these with a 0.8mm nozzle at 0.2mm layer height. Make sure you add some vertical lift with these parts. I use 1mm vert lift due to some curling you might experience with ABS.

 

 

 

Category: Toy & Game Accessories

Tags