P
PrintablesApostolos Kalafatis
Ducati keychain
I recommend printing it with no bottom/top layers and with 20% honeycomb infill. Of course you can print it normally or with multicolour.
- Pobrania
- 519
- Polubienia
- 42
- Ocena
- 5
Wszystkie modele
Liczymy pasujące modele…
P
PrintablesApostolos Kalafatis
Motorbike cell phone mount
For 12.5mm bars
- Pobrania
- 146
- Polubienia
- 29
- Ocena
- 5
P
PrintablesApostolos Kalafatis
KTM enduro/MX grips
See original version for printing suggestions.
- Pobrania
- 132
- Polubienia
- 14
- Ocena
- 0
P
PrintablesApostolos Kalafatis
Crankshaft balancer
Choose between single-piece or multiple-piece design. I recommend the multiple-piece design because you can print it laying on bed and thus get more precise dimensions of the bearing faces. You will need 8pcs of 3X10X4mm bearings (4pcs…
- Pobrania
- 119
- Polubienia
- 16
- Ocena
- 0
P
PrintablesApostolos Kalafatis
Enduro Stand Strap
Print with flexible filament with 100% infill.
- Pobrania
- 119
- Polubienia
- 13
- Ocena
- 0
P
PrintablesApostolos Kalafatis
Enduro/MX grips
22mm (left) and 24mm (right) grips for enduro and MX motorcycles. There is a 0.5mm tolerance (22.5 and 24.5mm) for easier fit. If you need a different tolerance value just scale the file in slicer. Scaling the 22mm file by 97.8% will…
- Pobrania
- 118
- Polubienia
- 13
- Ocena
- 0
P
PrintablesApostolos Kalafatis
Ender 3 neo dual fan
I designed this adapter that fits in-between the BLtouch and the hot end to mount a second 4010 fan. The adapter mounts to the BL touch holes and the BL touch mounts to the adapter (see pics). Unfortunately the board does not have a…
- Pobrania
- 109
- Polubienia
- 46
- Ocena
- 5
P
PrintablesApostolos Kalafatis
Chain Slider
Designed to be printed in one-piece on an Ender3 Neo (235X235 built plate). Just place STL on the correct face and rotate 45 degrees. You may need to remove skirt loop if you get an error (check the picture). Print with TPU with 10…
- Pobrania
- 103
- Polubienia
- 9
- Ocena
- 0
P
PrintablesApostolos Kalafatis
Ducati Monster Turn Signal Adapter
Replacement adapter for Ducati Monster. (Tested in ducati monster 620 2004 but may fit other models/years). Designed to embed the original brass nut, One will need to stop the print before the top layers, place the nut in the hex hole and…
- Pobrania
- 83
- Polubienia
- 8
- Ocena
- 0
P
PrintablesApostolos Kalafatis
Aprilia Cable Tie
Print with flexible filament with 100% infill.
- Pobrania
- 72
- Polubienia
- 13
- Ocena
- 0
P
PrintablesApostolos Kalafatis
Vintage Aprilia keychain
Print with TPU 5% Triangle infill
- Pobrania
- 61
- Polubienia
- 6
- Ocena
- 0
P
PrintablesApostolos Kalafatis
TM racing Grips
See original model for printing suggestions.
- Pobrania
- 60
- Polubienia
- 8
- Ocena
- 0
P
PrintablesApostolos Kalafatis
Ender3 neo mirrored fan duct for dual fan
Mirrored fan duct for the dual fan mod. https://www.printables.com/model/601263-ender-3-neo-dual-fan
- Pobrania
- 56
- Polubienia
- 10
- Ocena
- 5
P
PrintablesApostolos Kalafatis
Motorcycle Cable Guide
This is a recreation of the cable guides of the Aprilia Tuareg Rally. I printed with PETG or CF-PLA 100% infill. OEM code: 8134180
- Pobrania
- 49
- Polubienia
- 21
- Ocena
- 0
P
PrintablesApostolos Kalafatis
Aprilia vintage grips
Print with TPU 100% infill. Enabling “make overhangs printable” in slicer may help with quality. Hollow type is designed to be used with handguards.
- Pobrania
- 48
- Polubienia
- 4
- Ocena
- 0
P
PrintablesApostolos Kalafatis
Rotax 123-122 seal driver
I designed this to fit the oil seals on the rotax 123 and 122 engines without risk of damaging them. The 25X38X7 is for the sprocket seal and the 28X38X7 is for the cranckshaft seals. I recommend to be print in PETG or PLA+ or any other…
- Pobrania
- 41
- Polubienia
- 5
- Ocena
- 0
P
PrintablesApostolos Kalafatis
Modular Vial Rack
This is a modular vial rack. You can print only half of the design and still use it. In need of more capacity you can print the other half and attach it to the previous one. Each part holds 25 vials. Also, i have included TPU feet for…
- Pobrania
- 37
- Polubienia
- 13
- Ocena
- 0
P
PrintablesApostolos Kalafatis
Ducati Monster 620 Brake/Shift Lever Rubber Boot
Print with TPU 80-100% infill. 76510171A (Ducati OEM code)
- Pobrania
- 36
- Polubienia
- 9
- Ocena
- 0
P
PrintablesApostolos Kalafatis
Motorcycle disc guard
That's a rear brake disc guard for Aprilia Tuareg Rally. It is split in to parts to fit most printers. I also added a logo and the recommended tyre pressures to have them handy.
- Pobrania
- 33
- Polubienia
- 5
- Ocena
- 0
P
PrintablesApostolos Kalafatis
Wellnuts
M4, M5, M6 rubber nuts (wellnuts) used in a variety of applications (e.g., motorcycle fairings and windscreens). The design uses M4, M5 and M6 embedded nuts popular in 3D printing. Print in 83A TPE.
- Pobrania
- 31
- Polubienia
- 10
- Ocena
- 0
P
PrintablesApostolos Kalafatis
Maryse flexible spatula
The spatula is to be printed with flexible filament. TPU works great. I printed the handle out of PETG. The two parts are attached by friction, 2 drops of super glue can be added if needed.
- Pobrania
- 30
- Polubienia
- 3
- Ocena
- 0
P
PrintablesApostolos Kalafatis
Spin-Coater Chuck
This specific chuck is for 2X1.5 substrates (typically used in photovoltaics). Using the fusion file you can modify the file to suite your needs. The original design drawings and STL file is available in Ossila's Official website . I have…
- Pobrania
- 30
- Polubienia
- 4
- Ocena
- 0
P
PrintablesApostolos Kalafatis
Clutch hub tool
That is a tool that helps when torquing the clutch nut on ROTAX 123 engines. I printed with PETG with 10 perimeters for strength.
- Pobrania
- 26
- Polubienia
- 5
- Ocena
- 0
P
PrintablesApostolos Kalafatis
Headlight Guard
Direct replacement light guard for Aprilia Tuareg Rally. Can be printed without supports.
- Pobrania
- 24
- Polubienia
- 7
- Ocena
- 0
P
PrintablesApostolos Kalafatis
Motorcycle Stand Rubber Strap
Print with TPU 100% infill. OEM code: 8120025
- Pobrania
- 18
- Polubienia
- 5
- Ocena
- 0
P
PrintablesApostolos Kalafatis
Aprilia AF1 tank gasket
Fits the following models: AF1 FUTURA 125 AF1 FUTURA 50 EUROPA 50 PEGASO 125 PEGASO 600 Pegaso 650 RS 125 - Body (1995) RS 125 (eng.122cc) RS 125 (eng.123cc) RS 50 RS 50 Tuono
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
PrintablesApostolos Kalafatis
Aprilia AF1 125 Rear Wheel Silent Block
Replica of the real wheel silent block for the Aprilia AF1 125. Tested in AF1 125 sport pro 1992, works great. Print with TPU with 100% infill.
- Polubienia
- 2
- Ocena
- 0
P
PrintablesApostolos Kalafatis
Aprilia AF1 125 chain slider
Print with TPU and 100% infill
- Polubienia
- 1
- Ocena
- 0
To wszystkie aktualnie dostępne wyniki.