Liczymy pasujące modele…
I just made a very slight modification to an already fantastic design by davwilso. The new cup that Tide supplies has a larger diameter so it no longer fit in the original design. I I just added a wider lip at the top to contain the new…
Took the original and just tweaked it a little to remove some of the plastic. Still strong and functional, just a tiny bit quicker to print and lighter on the resources. The contacts: Keystone part number 209 I got mine from digikey part…
I took the Watch Stand by McL30D and reworked it a little. I removed the branding from the base and rebuild the top part removing the branding and taking the ridges off the ends for a simple basic look. I'm still tweaking the design, but…
I made this as a gift to fit into the receiver on a chevy tahoe. It would probably work with most class II/III hitch receivers. Printed with the chevy logo up with supports. Print instructions Category: Automotive
This is a modification to the orginal model made by HanzyTech ( https://www.thingiverse.com/thing:2169559 ) I just added a another area on the model to allow for USB cap storage as well. Print instructions Printed with PLA, .2mm, 10%…
I needed a simple grey water solution for my trailer. It only has 1 sink so I don't expect to need to hold a large volume of water. I bought a cheap reno store bucket drilled a 1" hole in the lid and then build this hose adapter to…
I just broke my leg and got my first set of crutches. So naturally while waiting for surgery to install screws and a plate into my leg I needed to check out what I would want for 12 weeks of crutches. This brought me to the beer holder…
I have a small workshop with limited space, with all the little projects I like to do, i'm often using a computer for reference. To that end I've mounted a small screen on the wall, and mounted a laptop underneath my work surface. It's…
This came into existence for my daughter (7). She wanted a zombie hand that was coming out of the ground in front of one of our grave stones we setup for Halloween. Challenge accepted. I figured out how to make it happen, and she painted…
There are a large number of headphone hooks out there, just none that fit my Viewsonic monitors well. I made one more to add to the list that fits my needs. It might be the one for you if you have the same depth of screen. Print…
The short: Box for holding desiccant. The Long: I saw somewhere, don't remember where, a picture of someone's enclosure with an acryclic box on top covering the spool of filament. Since summer started I've been fighting humidity in my…
I took the bottle cap ant trap by Drelen, and modified it slightly for use without a bottle cap, since I don't really have anything with suitable bottle caps. I really liked the simple design with the cover to keep the rain out and the…
Made this for my wife's bike to fill the end of the handlebar. Pressure fit, hasn't come out once. Print instructions Category: Replacement Parts
I created an enclosure for my prusa i3 mk2.5s and I've gone the lack table way that seem to be popular. I've been looking at all the different filament guides, they seem to be mostly small holes or long narrow holes. Both make sense. I'm…
I really liked the idea of a light in my enclosure that wasn't attached to the enclosure so that quick and easy removal of the enclosure for maintenance wasn't a hassle. I found this one which I liked and printed, then realized the issues…
I started with the Autobots logo by dantedagata, scaled it larger, added a backplate, and added a clip to the backside. My nephew is an avid transformers fan, so I wanted him to have his own autobots badge he can wear for his many…
I needed an easy way to mount my backup drive next to my mounted raspberry pi for a wall mounted out of the way offsite backup solution. I picked up a Seagate Backup Plus Portable 4tb drive and made the mount in inventor. I printed it…
I took the automatic fish feeder that pefozzy created (thank you!) and tweaked it a little to fit the components I had on hand. Specifically a NANO arduino and a 9g micro servo (SG90). I also added a cap for the food bowl. The design is…
NVMe drive case, with less rounded edges for a cleaner print.
I printed the simplified snapfit cradle by mizellj, and it worked for awhile, however it snapped at the point where the screw goes several times. I decided to update the design closer to the newer design you can find in the stores so that…
Shortly after getting a 3d printer, I decided I wanted an enclosure for it for a variety of reasons. Sound suppression, air cleaning, temperature control, and keeping little hands and flying toys from accidentally hitting it. I looked at…
At the request of my MIL, I designed and printed this portable wool/yarn caddy. She had seen something like it in a store for some ridiculous price ($70) and asked if I could make her one for when she's camping. The idea is you put your…
I made these as a replacement part and as a part to build onto for additions to our pop-up trailer. They clip on to the rods over the beds. I printed in PETG for the extra flexibility/durability. Clips on to any support 3/4" or smaller…
I took the customizable page holder by tomasf and simply added space for some weight. I made a hole to accomodate 4x 28mm (outside diameter) washers. They add sufficient weight to hold it nicely in place no matter the paper. I simply hot…
Wire brush holder for a skadis peg board.
I once again broke the steering rack on my rc18b2 buggy, same part always seems to break. I've looked for alternatives, but there only appears to be an aluminum one that goes for 50+ dollars. Needless to say I didn't want to wait the few…
Handle on my mitresaw broke off, so I cleaned the break and designed and printed a replacement for it. Then I just epoxied it to the existing screw from the old handle. Print instructions Category: Parts
Just a very slight modification to the design to make it hold just 2 cables. My night stand doesn't have many cables going to it. Print instructions Category: Organization
My son has recently started shaving, as the saying going 'necessity is the mother of invention'. I needed a new storage solution for two razors. We have an Ikea Hemnes medicine cabinet, so I designed the razor holder to use the existing…
This is still a work in progress, I've only printed a very small prototype to test my changes to the design. My goal is to have it in at least two halves that can be broken down and stack to take up less room in the kitchen. To that end…
This is a little organizer, cubby, hanging shelf thing. I made it for our camping trailer. It attaches using a pressure clip I modeled after the ones that came with our trailer fans. We use it to store our glasses, cell phones, watches.…
I printed the nice Dremel Cutting Guard by Frans Marx, and found that once screwed on, it pretty much could only stay in one position. To remedy this I designed and printed a friction spring to go with it to allow changes in the position…
This is a minor remix of a brilliant design by Wici. I've printed several and then decided to modify them slightly to enlarge the container and smooth out the sharp edges.
This is just a simple cover for the Snowman House of Horrors Stocking Holders so that I could pack them away with the other Christmas decor and not have them broken. Simple print and a few elastics to keep the lid on and the snowmen…
This is my second crutch add-on, the CrutchLite™. If you're going to be on crutches for awhile, you might as well upgrade them with aftermarket parts! This is a holder for those little cheap finger led lights you can get at the dollar…
The handle had ripped off my recycling container, so I needed a replacement. It's a simple design that gets the job done. Drilled through holes on the recycling box and fed the pins through with a little epoxy to keep everything nicely in…
I took @furfoxsake_91956 design and just tweaked it a bit to pass through drywall and mate up with a 2.5" pipe on the other side. Attached them with glue, added magnets. Check the magnet hole size before printing to match what you have on…
ADDON - This is ONLY the top bar with smaller sized holes to fit the RC10B74 and RC10B84 shock barrels. (16.5mm diameter). Download the rest of the files from the original creator.
This is a transponder mount for an MRT transponder to fit nicely into the Losi Nascar. Just add a bit of VHB on the bottom middle and a few screws and you're good to go. I used m1.6x5mm screws, because I had a pile of them.
To wszystkie aktualnie dostępne wyniki.
