P
Printablesetkaar
Canvas/Picture Hanger | Aufhänger/Haken für Bilder/Leinwände
Printed with a Bambu P1S in PETG without any supports.
- Pobrania
- 1685
- Polubienia
- 1054
- Ocena
- 4,75
Wszystkie modele
Liczymy pasujące modele…
P
Printablesetkaar
20, 25, 30 mm Hinge/Hinges | Scharnier/Scharniere
Derived from the “Charnière / Hinge” by Pa39 released under the CC BY-NC license ( https://creativecommons.org/licenses/by-nc/4.0/ ): https://www.thingiverse.com/thing:2097921 There is one difference: Imprint removed
- Pobrania
- 392
- Polubienia
- 16
- Ocena
- 0
P
Printablesetkaar
Snuff Tin/Box/Can | Schnupfdöschen/Schnupftabak-Dose
Tobacco snuff tin with dose opening. Can hold about 5 gram of snuff.
- Pobrania
- 130
- Polubienia
- 5
- Ocena
- 5
P
Printablesetkaar
Bitaxe Argon THRML 60 Socket (Enhanced Threaded Inserts Version)
Enhanced version with threaded inserts (M3x5.7 mm). Use the washers for the back side to protect the PCB. The threaded inserts are melt down from the other side, so that the metal will not touch the PCB. The screws will still screw in,…
- Pobrania
- 98
- Polubienia
- 14
- Ocena
- 5
P
Printablesetkaar
Cherry MX/Akko Keycaps
The tester board you can find here: https://www.printables.com/model/1256858-tester-board-for-cherry-mx-switches Heights of the inner Keycap Stems Flush: They are flush with the bottom (can touch it) when pressed down. Close: They are…
- Pobrania
- 82
- Polubienia
- 8
- Ocena
- 0
P
Printablesetkaar
IKEA Metod Wall Cabinet Wall Spacers | Abstandhalter
Spacers of different heights for IKEA Metod wall cabinets. The original size is 10 mm.
- Pobrania
- 81
- Polubienia
- 16
- Ocena
- 5
P
Printablesetkaar
Adapter Plate for UniFi Lite 8 PoE (USW-Lite-8-POE) to Flex 2.5G PoE (USW-Flex-2.5G-8-PoE)
I'm sure there are people which replaced their UniFi Lite 8 PoE (USW-Lite-8-POE) with the newer Flex 2.5G PoE (USW-Flex-2.5G-8-PoE). However, with that comes a new wall mounting adapter plate which has a different horizontal hole spacing.…
- Pobrania
- 68
- Polubienia
- 4
- Ocena
- 0
P
Printablesetkaar
IKEA Billy: Alternative 45 degree corner fittings/angle joint | Alternativer Eckbeschlag (replaces 401.041.09)
I really don't like the original corner fittings, also they don't allow usage of the original height extension units, so I created this alternative part which replaces 401.041.09. I recommend to use three of them, one at top, one in the…
- Pobrania
- 66
- Polubienia
- 17
- Ocena
- 5
P
Printablesetkaar
IKEA Metod/Billy: Drill Stencils for Furniture Joint Screws | Bohrschablone für Möbelschrauben/Verbinder
After installation you usually want to screw your IKEA Metod/Billy cabinets together. I use M4 x 35 mm furniture screws (also “furniture connectors”) with a hex drive for that, because both IKEA Metod and IKEA Billy have a wall thickness…
- Pobrania
- 62
- Polubienia
- 14
- Ocena
- 5
P
Printablesetkaar
Cup Raiser for Manual Espresso Machines (ROK Coffee, Presso Smartshot)
With this manually operated cup raiser for espresso machines such like the ROK SmartShot, your espresso will no longer splash all over the kitchen worktop during the extraction process. Also suitable for coffee cups (larger cups), use…
- Pobrania
- 52
- Polubienia
- 15
- Ocena
- 5
P
Printablesetkaar
IKEA Billy: Cover for Eccentric Wheel/Nut | Abdeckung Kontermutter/Möbelverbinder/Exzenter
You accidentally mounted the top plank from the wrong side, so that the plastic eccentric wheels are visible? Same happened to me of course. Here are covers for it. But they are also useful for the extension units. Unfortunately IKEA…
- Pobrania
- 42
- Polubienia
- 8
- Ocena
- 4
P
Printablesetkaar
Tester Board for Cherry MX Switches
A tester board for ten Cherry MX Switches, which can replace the original cardboard insert of the Cherry MX Experience Box. The keycaps you can find here: https://www.printables.com/model/1256854-cherry-mx-keycaps
- Pobrania
- 34
- Polubienia
- 2
- Ocena
- 0
P
Printablesetkaar
Hermes 3000 (1st Gen): Rubber Foot Replacement (Rubber Feet)
Original height of the feet is about 8.5–8.75 mm. You can choose between the original height and increased height. Printed in TPU.
- Pobrania
- 28
- Polubienia
- 2
- Ocena
- 0
P
Printablesetkaar
Hermes 3000 (1st Gen): Front Spacers Replacement
The inside of the typewriter is screwed together with the shell from the front, left and right. This is a replacement, since the original ones made of rubber are usually totally deteriorated. The photo does show an older version. Printed…
- Pobrania
- 12
- Polubienia
- 2
- Ocena
- 5
P
Printablesetkaar
Hermes 3000 (1st Gen): Case Rubber Spacer Replacement
Rubber spacer replacement, which is placed in between the outer shell and the typewriter body. Try the 3.5 mm version. There are alternative files with different heights in case you have problems to screw shell and inside together at the…
- Pobrania
- 11
- Polubienia
- 1
- Ocena
- 0
P
Printablesetkaar
Hermes 3000 (1st Gen): Paper Support Felt Replacement
Printed in TPU. For such a small part, make sure your TPU is dry, otherwise it will look catastrophic.
- Pobrania
- 9
- Polubienia
- 1
- Ocena
- 0
P
Printablesetkaar
Nespresso Vertuo Pop Drip Tray Top/Cover Replacement | Ersatz-Oberteil für Abtropfschale
Top part replacement for the drip tray.
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
Printablesetkaar
Thor Zone Mjolnir: Retainer for ASUS Prime Radeon RX 9070 OC Edition
Transporting your case with such a big graphics card may be dangerous. With that part, you can safely retain it. Also, without it it likely won't stay straight: Instructions The small standoffs for the riser cable must be raised a little…
- Pobrania
- 8
- Polubienia
- 0
- Ocena
- 0
P
Printablesetkaar
Adhesive Hook/Klebehaken
I made the adhesive surface large enough for a 3 cm (~ 1.2 inch) wide nano adhesive tape. While I only used it on my door I think due to it's large surface it may work on other surfaces as well (maybe dry walls?). For printing I used a…
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
Printablesetkaar
Hermes 3000 (2nd Gen): Rubber Foot Replacement (Rubber Feet)
Printed in TPU.
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
Printablesetkaar
Thor Zone Mjolnir: Retainer for ASUS Dual NVIDIA RTX 4070
Instructions The standoffs for the riser cable must be raised a little bit, since it will put force onto the back side of the graphics card. It also reduces the risk of the riser cable touching the CPU mounting backplate. You need 2 x…
- Pobrania
- 6
- Polubienia
- 2
- Ocena
- 0
P
Printablesetkaar
Hermes 3000 (2nd Gen): Felt Stencils
Since the felt is quite large, you need to print the stencil in multiple pieces.
- Pobrania
- 6
- Polubienia
- 0
- Ocena
- 0
P
Printablesetkaar
Hermes 3000 (2nd Gen): Space Bar Rubbers
The rubbers at the space bar are a little bit different from them on the bottom plate. Printed in TPU.
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
Printablesetkaar
Secured Razor Blade Disposal Box/Bin | Gesicherte Rasierklingen-Entsorgungsbox, Klingenbox
Razor blade disposal box in two sizes—secured with a mechanism to prevent blades from falling out (e.g., by children or during transport). Hinges For the hinges I recommend a 0.2mm nozzle. Disclaimer No AI was used for this model.
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
Printablesetkaar
Door Viewer / Peephole / Spy Hole Extension | Verlängerung für Türspion
Printed with a 0.4 nozzle and a 0.12 mm High Quality preset.
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
Printablesetkaar
Whisky Bottle Cork Cap | Kappe für Whisky-Korken
Don't pull on the cork, twist it.
- Pobrania
- 2
- Polubienia
- 2
- Ocena
- 0
P
Printablesetkaar
High Contact Pressure Spacers/Collars for Asetek AIO AM5 Retention Kit
There is a AM4/AM5 retention kit for Asetek based AIOs[1], e.g. from ASUS for the ASUS ROG STRIX LC II 120 ARGB, or ASUS ROG Ryuo 120. If used with the Thermal Grizzly AM5 High Performance Heatspreader, the contact pressure will be too…
- Pobrania
- 1
- Polubienia
- 1
- Ocena
- 0
P
Printablesetkaar
Thumbscrew Nut for Asetek AIO Retention Kit
For use with a M3 hexagonal nut.
- Pobrania
- 1
- Polubienia
- 1
- Ocena
- 0
To wszystkie aktualnie dostępne wyniki.