Liczymy pasujące modele…
Print with PETG at 100% infill should take about 30 minutes. please leave ⭐ review and rate. Buy me a some raman if i helped you out in anyway. https://ko-fi.com/3deeznutz Check out my other designs.…
~~This is for 300 and 350 bed size LDO kit~~ Nozzle scrubber with bed alignment. It uses the same bucket from the nozzle scrubber. a remixed of https://www.printables.com/model/346782-voron-24-bed-alignment-stop-updated and…
Print with a brim. * added a wing to the model to help with turning * *added a zip tie slot * *works with the s1 pro but can’t be screw down. this was verified by another user * This should fix the issue with the heated bed wires from…
*Included 350 bed trays. *Print with ABS or ASA * LH and RH tray and 4 2020 pins parts are needed. This is designed and tested on a LDO 300 2.4 I don't know how fitment will be with other kits. This mod will add side trays that will catch…
A remixed of 2x5 grid for 13 wrenches. a remixed of DesignTheEverything design please leave ⭐ review and rate. Buy me a some raman if i helped you out in anyway. https://ko-fi.com/3deeznutz Check out my other designs.…
*this is for the newer design cable for BTT SB2209 RP2040 Used to stiffen the can bus cable at the tool head side. **print with supports on the usb C part the long arm doesnt need it. print using PIF settings Use 2 zip ties please leave ⭐…
Gridfinity rack for your pliers and what not. can hold 9 please leave ⭐ review and rate. Buy me a some raman if i helped you out in anyway. https://ko-fi.com/3deeznutz Check out my other designs.…
A remixed of 1x4 grid for stubby wrenches. a remixed of DesignTheEverything design please leave ⭐ review and rate. Buy me a some raman if i helped you out in anyway. https://ko-fi.com/3deeznutz Check out my other designs.…
another mount for a ADXL345 accelerometer for input shaper. Mounts on the gantry bar using a screw to clamp down. Works with ender 3 and ender 3 pro please leave ⭐ review and rate. Buy me a some raman if i helped you out in anyway.…
Stackable Side Stands to service your printer on the side. Keeps printer stable while servicing. Stacks neatly for storage. Fits standard 40x40 and 20x20 extrusion bars. Print flat with pins facing up. will work with many printers please…
Ender s1 gantry light bar. im sure it will work on a pro. Screws right into the existing hex screws on the back of the gantry. I used a 24v led strip and soldered - and + wires and ran it into the black loom right at the clip on the Z…
Wera micro organizer Use a drill if you want to open up the holes a wider for larger diameter tools please leave ⭐ review and rate. Buy me a some raman if i helped you out in anyway. https://ko-fi.com/3deeznutz Check out my other designs.…
Holds the gantry during the build or maintenance
bed spacer holder for the 12mm round bed spacers that fysetc sells that come with the peek screws. Use hammer T-nuts and m3x8 socket head please leave ⭐ review and rate. Check out my other designs.…
Micron+ Crap catcher. right side has built in supports. its made to fit the newer 5015 bed fan style on the R1 micron+ but it can work without it. you can read about what this does here…
Logitech c270 mount on the gantry to get better view of the first layers. will need 2 heated inserts and some m3 socket head screws. i used this face plate with focus ring for the camera https://www.thingiverse.com/thing:3750229 please…
JST spittler box that can be pressed in the extrusion with no hardware. Fitment might be tight. hit it with a file to remove some material to make a snug fit. please leave ⭐ review and rate. Buy me a some raman if i helped you out in…
Daylight on a stick diffusers for 270mm length *has built in supports Use any 2020 led extrusion mounts
Bracket for V slot that can hold 3 rocker switches for lights or anything that needs power. please leave ⭐ review and rate. Buy me a some raman if i helped you out in anyway. https://ko-fi.com/3deeznutz Check out my other designs.…
expandable trays to fit your needs. For the mid you can use the screws to make it more ridged. Print Left and right ends x 1 and as many Mids as you need to fill the gap. the trays are 60mm deep x 35mm tall please leave ⭐ review and rate.…
a simple wall mounted bracket for a milk frother. please leave ⭐ review and rate. Buy me a some raman if i helped you out in anyway. https://ko-fi.com/3deeznutz Check out my other designs. https://cults3d.com/en/users/3DeezNutZ/3d-models…
bed spacer holder for Formbot kits that uses the bakelite bed spacers. This is designed for 1515 extrusion please leave ⭐ review and rate. Buy me a some raman if i helped you out in anyway. https://ko-fi.com/3deeznutz Check out my other…
Quick connect for your micron bed for 1515 extrusions. 2 pin jst connectors x2 2 pin wagos x3 please leave ⭐ review and rate. Buy me a some raman if i helped you out in anyway. https://ko-fi.com/3deeznutz Check out my other designs.…
Dyson V8 Dewalt Battery wall mount. pretty sure it might work with other battery types. Didn't test though i dont have other battery systems. Print in ABS PLA might creep
Voron micron+ JST junction box for LED lights. Fits snuggly in the extrusion. please leave ⭐ review and rate. Check out my other designs. https://cults3d.com/en/users/3DeezNutZ/3d-models https://www.printables.com/@3DeezNutz_752861/models
Klipsch promedia 2.1 speaker mount for this system. Need x2 M5x6x7 heated inserts Used the larger mounting system with 2 holes holder 2 hex - d30 please leave ⭐ review and rate. Buy me a some raman if i helped you out in anyway.…
The kids learned how to use the stove. Made a little holder that hangs on my vent that's made of glass away from the kids reach. Added a slightly larger hole diameter please leave ⭐ review and rate. Buy me a some raman if i helped you out…
Voron 350 center skirt with 5 integrated Wago 221-2401 connectors in rear center skirt for quick disconnect. Added a klipper expander version The 5th wago is for 12v output from the mcu to run delta part cooling fans 300 version…
I made handles to make your old crusty hex keys that you got from all of your printers kits into wera micro style. Works well with my holder https://www.printables.com/model/816368-wera-kraftform-micro-screwdriver-organizer The bore is…
bed spacer holder for formbot kits that use bakelite bed spacers. Use hammer T-nuts and m3x8 socket head the picture isnt bakelite spacer but you get the idea. please leave ⭐ review and rate. Check out my other designs.…
Diffuser for daylight match stick leds. I used these to mount to the 1515 extrusions https://www.printables.com/search/models?ctx=models&q=micron%2B&ordering=popular
Voron 300 center skirt with 5 integrated Wago 221-2401 connectors in rear center skirt for quick disconnect. Added a klipper expander version 350 version please leave ⭐ review and rate. https://cults3d.com/en/users/3DeezNutZ/3d-models…
Revo nozzle holders
This is for fysetc peek bed spacer kit. you will have to cut your peek screws 2mm off. A total length of 16mm of treads. This is designed for 1515 extrusion please leave ⭐ review and rate. Buy me a some raman if i helped you out in…
I got tire of this being in the way. Wall mount for Rubbermaid Two-Step Folding Foot Stoo Print 2 use your strongest setting. please leave ⭐ review and rate. Buy me a some raman if i helped you out in anyway. https://ko-fi.com/3deeznutz…
Micron+ center 5015 blower bed fan. m3x8 scews x2 m3 nuts x2 5015 blower fan x1 please leave ⭐ review and rate. Buy me a some raman if i helped you out in anyway. https://ko-fi.com/3deeznutz Check out my other designs.…
Mitutoyo 182-207 150mm scale holder with built in PTFE cutter.
left power inlet with 1mm tab with the cutout to match the rest of the skirts please leave ⭐ review and rate. Check out my other designs. https://cults3d.com/en/users/3DeezNutZ/3d-models https://www.printables.com/@3DeezNutz_752861/models
protects the extractor tips and keeps tools together.
make use of those hotend adapters you got laying around. heated insert and nut version for joining the 2 halfs together. Use a m3x10 sockethead. Print with 0.12 LH
To wszystkie aktualnie dostępne wyniki.
