Liczymy pasujące modele…
Updated version below! These cable covers help protect the connectors on your Funwheel Box from the elements and mud build up. Step files have been included if you wish to modify these. The tolerances are deliberately tight to make the…
Updated CAD below. A charge plug protector designed for the Funwheel Controller Box . Should fit a GX16 port with an m16x1 thread to secure it on the port. Tested on a Bambu Labs P1S at 0.08mm layer height for maximum qualityyyyyy. If you…
Some adapters you can print to mount your Flight Fender to your Fungineers Stompies
!OBLIGATORY WARNING! Use this at your own risk. This model has been tested on my own Pint however I cannot guarantee this will be rugged enough to sustain your own use case. Printing in materials that do not deform at low temps or…
Updated CAD below. A charge plug protector designed for the Funwheel Controller Box . Should fit a GX16 port with various sizes available if you're having tolerance issues. Tested on a Bambu Labs P1S at 0.08mm layer height for maximum…
Optional mounting brackets to stow a battery in your Funwheel Box for a split pack configuration. Print 2. Step files have been provided to modify according to your needs. The battery this is designed around is 144mm x 44mm x 28mm (width,…
Supports the GT motor cable from coming loose and allows for an airtag to be retained.
New CAD available below. Upgraded version of the old 2 piece cable guard. This cable guard helps protect the connectors on your Funwheel Box from the elements and mud build up. Step files have been included if you wish to modify these.…
Updated CAD below. A adapter to allow the Fungineers stompies and X7 rails to mount a regular TFL drop top fender and lowers too. Print 2. 1 for the rear and 1 for the front. Use countersunk 4x M5x12mm and 4x countersunk M5x20mm for…
A DXF for adding the status bar cutout to footpads intended for use with the Funwheel controller box. Align with the bolt holes for correct placement.
These and any length of 20x20mm square dowel will make an angled rack for your shoes (that you have too many of like me) Use simple countersunk wood screws no longer than 30mm to secure the wooden beams. I recommend using some foam…
Designed to go on a 6 ton hydraulic press off ebay. Picture of the valve dimensions it will fit onto included.
A tool to help insert and remove a GX16-2 or 4 port. Choose the version you need from the files section or download all. Can be used by to hand to tighten/loosen on the knurled section or used with a wrench on the hexagonal section.…
A little mount to 3m tape wherever you choose. Add a bit of double sided tape to the back and slot it in.
Latest CAD available below. The Funwheel Controller Box lid. In case you need to make a new one. .Step and .STL to suit whatever you're using to fab a new one.
A small clamp to secure a headlight in the Funwheel Box. Requires 1 M3x5mm bolt to secure it. For more info and to order a Funwheel Box go to: https://www.fungineers.us/products/funwheel-controller-box
Updated CAD below. An extended lower designed to allow a TFL drop top fender (XR(C)/GT) to fit on an X10 rail system with Stompie footpads. Use countersunk 4x M5x14mm and 4x countersunk M5x18mm for securing to the X10 rails. 18mm for the…
Updated CAD below. A fender delete designed for Fungineers x7 boards using stompies. Curved because life's too edgy these days. Use 4x countersunk M5x14mm and 4x countersunk M5x10mm for securing to the X10 rails. 10mm for the inner bolts…
Wanted a lil wall holder for my blowdry brush rather than it laying on the floor. Supports up to 42mm wide handles ❤
Updated CAD below. A fender delete designed for Fungineers X7 boards using stompies. Use 4x countersunk M5x14mm and 4x countersunk M5x18mm for securing to the X7 rails. 18mm for the inner bolts towards the wheel well and 14mm for the…
Idk who needs this but if you still have the metal nut here's a printable replacement 3/8-24 nut.
Updated CAD below. A fender delete designed for Fungineers X10 boards using stompies. Use countersunk 4x M5x14mm and 4x countersunk M5x18mm for securing to the X10 rails. 18mm for the inner bolts towards the wheel well and 14mm for the…
A printable Onewheel Pint controller insulator in case you lost/damaged yours. 0.3mm thick
Motor and Footpad nuts for the Onewheel Pint. Printed on a BambuLab P1S at 0.08mm layer height for optimal thread quality. Motor nut is M16x1 and the footpad nut is M11.5x1 (fr why 11.5)
To wszystkie aktualnie dostępne wyniki.
